LIGHTPULSE PCI HOST Network Card Settings and Configuration

Card Type	Network Interface Card
NIC Type	FDDI
Maximum Onboard Memory	Unidentified
Boot ROM	Unidentified
Network Transfer Rate	Unidentified
Topology	Star
Wiring Type	Fiber optic cable, unshielded Twisted Pair
Data Bus	32-bit PCI

CONNECTIONS
Function	Label
80-pin proprietary "GLM" interface connector	CN1
Fiber optic connector via 80-pin proprietary "GLM" interface	CN2/A
UTP on DB9 connector via 80-pin proprietary "GLM" interface	CN2/B

DIAGNOSTIC LED(S)
Green LED	Yellow LED	Condition
Off	Off	Wake-up failure (dead board)
Off	On	Power On Self Test failure (dead board)
Off	Slow blink (1 Hz)	Wake-up failure
Off	Fast blink (4 Hz)	Failure in Power On Self Test
Off	Flashing (irregular)	Power On Self Test processing in progress
On	Off	Failure while functioning
On	On	Failure while functioning
On	Slow blink (1 Hz)	Normal – inactive
On	Flashing (irregular)	Normal – active
On	Fast blink (4 Hz)	Normal – busy
Slow blink	Off	Normal – link down or not yet started
Slow blink	Slow blink (1 Hz)	Off-line for download
Slow blink	Fast blink (4 Hz)	Restricted off-line mode (waiting for restart)

MISCELLANEOUS TECHNICAL NOTES

If either media or speed is changed, the "GLM" must be changed.