NE2100 Network Card Settings and Configuration

NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	16-bit ISA
Topology	Linear Bus
Wiring Type	RG--58A/U 50ohm coaxial AUI transceiver via DB-15 port
Boot ROM	Available

WAIT STATE
Setting		JP1
»	0 wait states	Open
	1 wait state	Closed
Note:Systems using 80ns or faster memory may need to enable one wait state.

CABLE TYPE
Type	JP2-JP9
RG--58A/U 50ohm coaxial	Pins 2 & 3 closed
AUI transceiver via DB-15 port	Pins 1 & 2 closed

DMA CHANNEL
Channel		JP10	JP11	JP12	JP13	JP14	JP15	JP16	JP17
	DMA3	Closed	Open	Open	Open	Closed	Open	Open	Open
»	DMA5	Open	Closed	Open	Open	Open	Closed	Open	Open
	DMA6	Open	Open	Closed	Open	Open	Open	Closed	Open
	DMA7	Open	Open	Open	Closed	Open	Open	Open	Closed

BOOT ROM
Setting		JP18
»	Disabled	Open
	Enabled	Closed

BASE I/O AND BOOT ROM ADDRESS
Address		Boot ROM	JP19	JP20
»	300h	C8000h	Closed	Closed
	320h	CC000h	Closed	Open
	340h	D0000h	Open	Closed
	360h	D4000h	Open	Open

INTERRUPT REQUEST
IRQ		JP21	JP22	JP23	JP24
	2/9	Open	Open	Open	Closed
»	3	Open	Open	Closed	Open
	4	Open	Closed	Open	Open
	5	Closed	Open	Open	Open