PCI-003V2 TECH NET CARD Network Card Settings and Configuration

NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	8-bit ISA
Topology	Linear Bus
Wiring Type	RG-58A/U 50ohm coaxial AUI transceiver via DB-15 port
Boot ROM	Available

CABLE TYPE
Type		JP1A - JP1F
»	RG-58A/U 50ohm coaxial	Pins 2 & 3 Closed
	AUI transceiver via DB-15 port	Pins 1 & 2 Closed

INTERRUPT REQUEST
IRQ	JP2A	JP2B	JP2C	JP2D	JP2E
2	Closed	Open	Open	Open	Open
3	Open	Closed	Open	Open	Open
4	Open	Open	Closed	Open	Open
5	Open	Open	Open	Closed	Open
*5	Open	Open	Open	Open	Closed
Note: *This is an I/O fetch interrupt.

DMA CHANNEL
Channel	JP2F	JP2G	JP2H	JP2I
DMA1	Closed	Open	Closed	Open
DMA3	Open	Closed	Open	Closed

I/O BASE ADDRESS
I/O		SW1/1	SW1/2	SW1/3	SW1/4	SW1/5
	200h	Off	On	On	On	On
	220h	Off	On	On	On	Off
»	300h	Off	Off	On	On	On
	320h	Off	Off	On	On	Off
	3E0h	Off	Off	Off	Off	Off

BASE MEMORY ADDRESS
Address		SW1/6	SW1/7	SW1/8	SW1/9
	C0000h	On	On	On	On
	C4000h	Off	On	On	On
»	C8000h	On	Off	On	On
	CC000h	Off	Off	On	On
	D0000h	On	On	Off	On
	D4000h	Off	On	Off	On
	D8000h	On	Off	Off	On
	DC000h	Off	Off	Off	On
	E0000h	On	On	On	Off
	E4000h	Off	On	On	Off
	E8000h	On	Off	On	Off
	EC000h	Off	Off	On	Off
	F0000h	On	On	Off	Off
	F4000h	Off	On	Off	Off
	F8000h	On	Off	Off	Off
	FC000h	Off	Off	Off	Off

BOOT ROM
Setting		SW1/10
»	Disabled	Off
	Enabled	On