FIBER-OPTIC SAS CONTROLLER (DEFPA-AA), Network Card Settings and Configuration

DIGITAL EQUIPMENT CORPORATION

FIBER-OPTIC SAS CONTROLLER (DEFPA-AA),

FIBER-OPTIC SAS ADAPTER (DEFPA-AB)

Card Type
Network Interface Card
NIC Type
FDDI
Maximum Onboard Memory
Unidentified
Boot ROM
Unidentified
Network Transfer Rate
100Mbps
Topology
Ring
Wiring Type
Fiber optic cable
Data Bus
32-bit PCI

CONNECTIONS
Function
Label
Fiber-optic connector - duplex SC
CN1

DIAGNOSTIC LED(S)
LED
Color
Status
Condition
LED1
Green
On
Network connection is good
LED1
Green
Blinking
Network connection in progress
LED1
Green
Off
Network connection is broken
LED1
Red
On
See Note
LED1
Red
Blinking
Illegal topology
LED1
Red
Off
Network connection is broken
Note: If LED1 is red and on after system boots, indicates broken port or Link Confidence Test (LCT) failure; retry loop. If LED1 is red and on before system boots, indicates self-test failure.

Headaches Begone! A Systemic Approach To Healing Your Headaches

Don't Let Your Bike Seat Ruin Your Sex Life Book

FIBER-OPTIC SAS CONTROLLER (DEFPA-AA), Network Card Settings and Configuration

Search

My Books

Discover

Card Type	Network Interface Card
NIC Type	FDDI
Maximum Onboard Memory	Unidentified
Boot ROM	Unidentified
Network Transfer Rate	100Mbps
Topology	Ring
Wiring Type	Fiber optic cable
Data Bus	32-bit PCI

CONNECTIONS
Function	Label
Fiber-optic connector - duplex SC	CN1

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Green	On	Network connection is good
LED1	Green	Blinking	Network connection in progress
LED1	Green	Off	Network connection is broken
LED1	Red	On	See Note
LED1	Red	Blinking	Illegal topology
LED1	Red	Off	Network connection is broken
Note: If LED1 is red and on after system boots, indicates broken port or Link Confidence Test (LCT) failure; retry loop. If LED1 is red and on before system boots, indicates self-test failure.