Ether+ utp Network Card Settings and Configuration
Compatible systems corporation
Ether+ utp
Card Type | Network Interface Card |
NIC Type | Ethernet |
Network Transfer Rate | 10Mbps |
Topology | Linear Bus, Star |
Wiring Type | Unshielded twisted pair AUI transceiver via DB-15 |
Data Bus | SCSI |
Boot ROM | Not available |
CONNECTIONS | |||
Function | Label | Function | Label |
Unshielded twisted pair | CN1 | 25-pin SCSI connector - external | CN3 |
AUI transceiver via DB-15 | CN2 | ||
Note: 50-pin to 25-pin adapter cables are available. | |||
USER CONFIGURABLE SETTINGS | |
SCSI ID | SW/1 Position |
0 | 0 |
1 | 1 |
2 | 2 |
3 | 3 |
4 | 4 |
5 | 5 |
6 | 6 |
Invalid | 7-9 |
CABLE TYPE SELECTION | |
Type | JP1 |
AUI transceiver via DB-15 | Open |
Unshielded twisted pair | Closed |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
1 | Green | On | Receive data line polarity error |
1 | Green | Off | No receive data line polarity error |
2 | Green | Blinking | Data is being received |
2 | Green | Off | Data is not being received |
3 | Green | Blinking | Data is being received |
3 | Green | Off | Data is not being received |
4 | Green | Blinking | Data is being received |
4 | Green | Off | Data is not being received |
5 | Green | Blinking | Data is being received |
5 | Green | Off | Data is not being received |
6 | Green | Blinking | Data is being transmitted |
6 | Green | Off | Data is not being transmitted |
7 | Green | Blinking | Data is being transmitted |
7 | Green | Off | Data is not being transmitted |
8 | Green | Blinking | Data is being transmitted |
8 | Green | Off | Data is not being transmitted |
9 | Green | Blinking | Data is being transmitted |
9 | Green | Off | Data is not being transmitted |
10 | Green | On | 10BaseT link test successful |
10 | Green | Off | 10BaseT link test unsuccessful |
Note: When data is being received, LEDs 2 through 5 will light in sequence. When data is being transmitted, LEDs 9 through 6 will light in sequence. | |||
My Books
