CS-FDDI PCI-LCF-DAS Network Card Settings and Configuration

Card Type	Network Interface Card
NIC Type	FDDI
Maximum Onboard Memory	Unidentified
Boot ROM	Available
Network Transfer Rate	100Mbps
Topology	Ring
Wiring Type	Fiber optic cable
Data Bus	32-bit PCI

CONNECTIONS
Function	Label	Function	Label
LCF transceiver 2	CN1	LCF transceiver 1	CN2

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Boot ROM disabled	JP13/A	Open
	Boot ROM enabled	JP13/A	Closed
»	Factory configured - do not alter	JP13/E	Unidentified
»	Factory configured - do not alter	JP3	Unidentified

BASE I/O ADDRESS SELECTION
Address		JP13/B	JP13/C	JP13/D
	200h-21Fh	Closed	Closed	Closed
	220h-23Fh	Closed	Closed	Open
	240h-25Fh	Closed	Open	Closed
	280h-29Fh	Closed	Open	Open
»	300h-31Fh	Open	Closed	Closed
	320h-33Fh	Open	Closed	Open
	340h-35Fh	Open	Open	Closed

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Unidentified	On	LCF 1 status (see conditions in note below)
LED2	Unidentified	Off	LCF 2 status (see conditions in note below)
LED3	Green	On	Ring connection is good
LED3	Green	Off	Ring connection is broken
LED4	Yellow	On	Data is being transmitted/received
LED4	Yellow	Off	Data is not being transmitted/received
Note: LED1 and LED2 vary depending on model. Red (On: Illegal connection, Off: Valid connection); or Orange (On: Line error alarm activated, Off: Line error alarm not activated).

DAUGHTER BOARD USER CONFIGURABLE SETTINGS

Note: JP14 and JP16 are unidentified.