NETELLIGENT 10 T/2 PCI UTP/COAX CONTROLLER Network Card Settings and Configuration
COMPAQ COMPUTER CORPORATION
NETELLIGENT 10 T/2 PCI UTP/COAX CONTROLLER
Card Type | Network Interface Card |
NIC Type | Ethernet |
Maximum Onboard Memory | Unidentified |
Boot ROM | Available |
Network Transfer Rate | 10Mbps |
Topology | Linear Bus |
Wiring Type | Unshielded twisted pair (RJ-45), RG-58A/U 50ohm coaxial |
Data Bus | 32-bit PCI |
CONNECTIONS | |||
Function | Label | Function | Label |
UTP connector (RJ-45) | CN1 | BNC connector | CN2 |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Unidentified | On | Network connection is good |
LED1 | Unidentified | Off | Network connection is broken |
LED2 | Unidentified | On | Data is being transmitted or received |
LED2 | Unidentified | Off | Data is not being transmitted or received |
My Books
