CN210E Network Card Settings and Configuration

NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	8/16-bit ISA
Topology	Linear bus
Wiring Type	Unshielded twisted pair
Boot ROM	Available

CABLE TYPE
Type		JP2
	Unshielded twisted pair	Open
»	RG58A/U 50ohm coaxial	Closed
	DIX transceiver via DB-15 port	Open

INTERRUPT SETTINGSS
IRQ	W2	W3	W4	W5	W6	W7	W8	W9	W10
2/9	Closed	Open	Open	Open	Open	Open	Open	Open	Open
3	Open	Closed	Open	Open	Open	Open	Open	Open	Open
4	Open	Open	Closed	Open	Open	Open	Open	Open	Open
5	Open	Open	Open	Closed	Open	Open	Open	Open	Open
10	Open	Open	Open	Open	Closed	Open	Open	Open	Open
11	Open	Open	Open	Open	Open	Closed	Open	Open	Open
12	Open	Open	Open	Open	Open	Open	Closed	Open	Open
14	Open	Open	Open	Open	Open	Open	Open	Closed	Open
15	Open	Open	Open	Open	Open	Open	Open	Open	Closed

BOOT ROM
Setting		W11
»	Disabled	Open
	Enabled	Closed

BOOT ROM ADDRESS
Address		W12	W13
»	C8000h	Closed	Closed
	CC000h	Closed	Open
	D0000h	Open	Closed
	D4000h	Open	Open

BASE I/O ADDRESS
Address		W14	W15
»	300h	Open	Open
	320h	Open	Closed
	340h	Closed	Open
	360h	Open	Open

WAIT STATE CONFIGURATION
Wait State(s)	W16
0 wait states	Closed
1 wait state	Open

DMA CHANNEL
Channel	W26	W27	W28	W29	W30	W31	W32	W33
DMA3	Closed	Open	Open	Open	Closed	Open	Open	Open
DMA5	Open	Open	Open	Closed	Open	Open	Open	Closed
DMA6	Open	Open	Closed	Open	Open	Open	Closed	Open
DMA7	Open	Closed	Open	Open	Open	Closed	Open	Open

TERMINATOR
Setting		JP1
»	Unterminated	Pins 2 & 3 closed
	Coaxial linear-bus terminated by card	Pins 1 & 2 closed