WA-C432 Network Card Settings and Configuration
CISCO SYSTEMS, INC.
WA-C432
Card Type | Network Interface Card |
NIC Type | Ethernet |
Maximum Onboard Memory | Unidentified |
Boot ROM | Unidentified |
Network Transfer Rate | 10Mbps |
Topology | Star |
Wiring Type | Unshielded twisted pair |
Data Bus | 32-bit PCI |
CONNECTIONS | |
Function | Label |
UTP via RJ-45 connector | CN1 |
DIAGNOSTIC LED(S) | ||
Green LED | Yellow LED | Condition |
On | Off | Fiber Optic link is good |
Off | On | Fiber Optic link is broken |
On | On | Data is not being transmitted/received |
Off | Off | Network connection is broken |
Note: Exact location of LEDs is unidentified, refer to above for function of corresponding color. | ||
My Books
