TPFOT-2 Network Card Settings and Configuration

Device Type	Transceiver
NIC Type	Ethernet
Maximum Onboard Memory	Unidentified
Boot ROM	Not available
Network Transfer Rate	10Mbps
Topology	Star
Wiring Type	Unshielded twisted pair Fiber optic
Data Bus	External

CONNECTIONS
Function	Label	Function	Label
Power jack	CN1	Fiber optic connector (ST) - transmit	TX
RJ-45 UTP connector	CN2	Fiber optic connector (ST) - receive	RX

USER CONFIGURABLE SETTINGS
Function	Label	Position
RJ-45 configured for crossover operation	SW1	On
RJ-45 configured for straight-through operation	SW1	Off

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
PWR	Green	On	Power is on
PWR	Green	Off	Power is off
XMT	Green	Blinking	Data is being received from fiber optic and transmitted from RJ45
XMT	Green	Off	Data is not being received from fiber optic and transmitted from RJ45
RCV	Yellow	Blinking	Data is being received from RJ45 and transmitted from fiber optic
RCV	Yellow	Off	Data is not being received from RJ45 and transmitted from fiber optic
COL	Red	Blinking	Collision detected on network
COL	Red	Off	No collision detected on network
LNK	Green	On	UTP link is good
LNK	Green	Off	UTP link is broken
FLNK	Green	On	Fiber optic link is good
FLNK	Green	Off	Fiber optic link is broken