MT-800 Network Card Settings and Configuration

Device Type	Multiport Transceiver
NIC Type	Ethernet
Maximum Onboard Memory	Unidentified
Boot ROM	Not available
Network Transfer Rate	10Mbps
Topology	Star
Wiring Type	Unshielded twisted pair, fiber optic cable
Data Bus	External

CONNECTIONS
Function	Label	Function	Label
AUI transceiver via DB-15 (port 1)	CN1	AUI transceiver via DB-15 (port 6)	CN6
AUI transceiver via DB-15 (port 2)	CN2	AUI transceiver via DB-15 (port 7)	CN7
AUI transceiver via DB-15 (port 3)	CN3	AUI transceiver via DB-15 (port 8)	CN8
AUI transceiver via DB-15 (port 4)	CN4	AUI external transceiver via DB-15 (port 9)	CN9
AUI transceiver via DB-15 (port 5)	CN5	Power connector	CN10

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	SQE test function disabled	SQE	Off
	SQE test function enabled	SQE	On
»	Loopback function disabled	LBK	Off
	Loopback function enabled	LBK	On

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
PWR	Green	On	Power is on
PWR	Green	Off	Power is off
RCV	Orange	Blinking	Data is being received
RCV	Orange	Off	Data is not being received
CLN	Red	Blinking	Collision detected on network
CLN	Red	Off	No collision detected on network
LED1	Green	On	Data is being transmitted on port 1
LED1	Green	Off	Data is not being transmitted on port 1
LED2	Green	On	Data is being transmitted on port 2
LED2	Green	Off	Data is not being transmitted on port 2
LED3	Green	On	Data is being transmitted on port 3
LED3	Green	Off	Data is not being transmitted on port 3
LED4	Green	On	Data is being transmitted on port 4
LED4	Green	Off	Data is not being transmitted on port 4
LED5	Green	On	Data is being transmitted on port 5
LED5	Green	Off	Data is not being transmitted on port 5
LED6	Green	On	Data is being transmitted on port 6
LED6	Green	Off	Data is not being transmitted on port 6
LED7	Green	On	Data is being transmitted on port 7
LED7	Green	Off	Data is not being transmitted on port 7
LED8	Green	On	Data is being transmitted on port 8
LED8	Green	Off	Data is not being transmitted on port 8