MACCON+ 610ET Network Card Settings and Configuration
ASANTE TECHNOLOGIES, INC.
MACCON+ 610ET
Card Type | Ethernet |
Chip Set | Unidentified |
Data Bus | NuBus |
Maximum Network Rate | 10Mbps |
Topology | Linear Bus/Star |
Wiring Type | Unshielded twisted pair AUI transceiver via DB-15 port |
Boot ROM | Not available |
CONNECTIONS | |||
Function | Label | Function | Label |
Daughterboard header | CN1A & B | AUI transceiver via DB-15 port | CN3 |
Unshielded twisted pair | CN2 | ||
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
| » | Link integrity function enabled | JP2 | Open |
Link integrity function disabled | JP2 | Closed | |
CABLE TYPE | |
Setting | JP1 |
Auto-detect | Open |
AUI transceiver via DB-15 port | Closed |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Yellow | Blinking | Traffic detected on network |
LED1 | Yellow | Off | Traffic not detected on network |
LED2 | Green | On | Network connection is good |
LED2 | Green | Off | Network connection is broken |
Note: Exact location of individual LEDs is unidentified. | |||
My Books
