PE-EPP/CT Network Card Settings and Configuration
ARK PC TECHNOLOGY
PE-EPP/CT
NIC Type | Ethernet |
Network Transfer Rate | 10Mbps |
Data Bus | Parallel |
Topology | Linear Bus/Star |
Wiring Type | Unshielded twisted pair RG58A/U 50ohm coaxial |
Boot ROM | Not available |
CONNECTIONS | |||
Function | Label | Function | Label |
Parallel port | CN1 | RG58A/U 50ohm coaxial port | CN3 |
Unshielded twisted pair port | CN2 | DC power port | CN4 |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Yellow | On | Jabber is detected on network |
LED1 | Yellow | Off | Jabber is not detected on network |
LED2 | Green | On | Power is on |
LED2 | Green | Blinking | Data is being transmitted |
LED2 | Green | Off | Power is off |
LED3 | Yellow | Blinking | Collision is detected on network |
LED3 | Yellow | Off | Collision is not detected on network |
LED4 | Green | On | 10Base-T network connection is good |
LED4 | Green | Blinking | Data is being received |
LED4 | Green | Off | 10Base-T network connection is broken |
My Books
