ANCOR COMMUNICATIONS, INC.
FCS 266 SBUS, FCS 1062 SBUS
NIC Type | Fiber Channel |
Processor | Intel i960 |
Processor Speed | 33MHz |
Chipset | Ancor Communications VHSCI 4 |
Maximum Onboard Memory | 1MB VRAM/512KB SRAM/256KB Flash ROM/128KB ROM |
Network Transfer Rate | 265.6125Mbps (FCS 266 SBUS) 1062.5Mbps (FCS 1062 SBUS) |
Data Bus | SBus |
Topology | Star/Peer-Peer |
Wire Type | Fiber optic cable |
Boot ROM | Not available |
CONNECTIONS | |||
Function | Label | Function | Label |
Receive fiber optic SC connector | CN1 | Transmit fiber optic SC connector | CN2 |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Unidentified | On | Card is receiving data |
LED1 | Unidentified | Off | Card is not receiving data |
LED2 | Unidentified | On | Card is transmitting data |
LED2 | Unidentified | Off | Card is not transmitting data |
LED3 | Green | Blinking | Normal operation |
LED3 | Green | 1 blinks | EPROM failed checksum test |
LED3 | Green | 2 blinks | Processor memory failed self-test |
LED3 | Green | 3 blinks | Buffer memory failed self-test |
LED3 | Green | 4 blinks | FPGA failed self-test |
LED3 | Green | 5 blinks | Flash ROM failed checksum test |
LED3 | Green | 6 blinks | Flash ROM ID failed self-test |
LED3 | Green | 7 blinks | OLC loopback test failed |
LED3 | Green | 8 blinks | Chipset register failed self-test |
LED3 | Green | 9 blinks | Timer failed self-test |
LED3 | Green | Off | Power is off or processor is not functioning |