AT-206 Network Card Settings and Configuration
ALLIED TELESYN, INC.
AT-206
Card Type | Single Port Transceiver |
NIC Type | Ethernet |
Network Transfer Rate | 10Mbps/CSMA/CD |
Topology | Linear Bus |
Wiring Type | AUI transceiver via DB-15 port RG-58A/U 50 ohm coaxial |
Data Bus | None |
CONNECTIONS | |||
Function | Label | Function | Label |
AUI transceiver via DB-15 | CN1 | Coaxial active (Stinger) type tap | CN2 |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
| » | SQE/Heartbeat switch disabled | SW1 | 0 |
SQE/Heartbeat switch enabled | SW1 | 1 | |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
Power | Amber | On | Heartbeat signal is enabled |
Power | Green | On | Heartbeat signal is disabled |
XMIT | Unidentified | On | Data is being transmitted |
XMIT | Unidentified | Off | Data is not being transmitted |
RCV | Unidentified | On | Data is being received |
RCV | Unidentified | Off | Data is not being received |
HB | Unidentified | On | SQE test signal is present |
HB | Unidentified | Off | SQE test signal is not present |
COL | Unidentified | On | Collision detected on network |
COL | Unidentified | Off | No collision detected on network |
My Books
