EP-200B Network Card Settings and Configuration

NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	PCMCIA TYPE II
Topology	Linear Bus
Wiring Type	RG-58A/U 50ohm coaxial
Boot ROM	Not available

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Green	On	Power on
LED1	Green	Blinking	Data is being transmitted
LED1	Green	Off	Power off
LED2	Green	On	Network connection is good (UTP only)
LED2	Green	Blinking	Data is being received (UTP only)
LED2	Green	Off	Network connection is broken (UTP only)
LED3	Yellow	Blinking	Collision detected on network
LED3	Yellow	Off	No collision detected on network
LED4	Yellow	On	Card is transmitting continuously (jabber)
LED4	Yellow	Off	Normal operation
Note: LEDs are located on media coupler.