ETHERPOCKET-SP (EN2209) Network Card Settings and Configuration
ACCTON TECHNOLOGY CORPORATION
ETHERPOCKET-SP (EN2209)
NIC Type | Ethernet |
Network Transfer Rate | 10Mbps |
Data Bus | Parallel |
Topology | Linear Bus, Star |
Wiring Type | Unshielded twisted pair RG-58A/U 50ohm coaxial |
Boot ROM | Not available |
CONNECTIONS | |||
Function | Label | Function | Label |
Parallel port | CN1 | Unshielded twisted pair port | CN3 |
RG-58A/U 50ohm coaxial port | CN2 | DC power port | CN4 |
CABLE TYPE SELECTION | |
Type | SW1 |
RG-58A/U 50ohm coaxial | Position 2 (Right) |
Unshielded twisted pair | Position 1 (Left) |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Green | On | Power is on |
LED1 | Green | Off | Power is off |
LED2 | Green | Blinking | Data is being transmitted/received |
LED2 | Green | Off | Data is not being transmitted/received |
LED3 | Green | On | 10Base-T network connection is good |
LED3 | Green | Off | 10Base-T network connection is broken |
LED4 | Green | On | 10-Base2 network connection is good |
LED4 | Green | Off | 10-Base2 network connection is broken |
Note: The location of the LED’s are unidentified. | |||
My Books
