FDDILINK (3C796) Network Card Settings and Configuration
3COM CORPORATION
FDDILINK (3C796)
NIC Type | FDDI |
Processor | 68000 |
Processor Speed | Unidentified |
I/O Options | Optical bypass relay |
Maximum Onboard Memory | 1MB RAM |
Boot ROM | Not available |
Network Transfer Rate | 100Mbps |
Topology | Ring |
Wire Type | Fiber optic cable |
Data Bus | 32-bit PCI |
Card Size | Full height, half length |
CONNECTIONS | |||
Function | Label | Function | Label |
Optical bypass relay | CN1 | Secondary fiber optic SC cable connector | CN3 |
Primary fiber optic SC cable connector | CN2 | ||
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
PHYA | Green | On | Network connection on primary connector is good |
PHYA | Green | Blinking | Card is attempting to connect to network via primary connector |
PHYA | Green/Yellow | Alternating | Card is on standby mode, or card not functioning properly |
PHYA | Yellow | On | Network connection on primary connector is broken or self-test failed |
PHYA | Yellow | Blinking | Network topology on primary connector is invalid |
PHYA | N/A | Off | Card is not receiving power |
PHYB | Green | On | Network connection on secondary connector is good |
PHYB | Green | Blinking | Card is attempting to connect to network via secondary connector |
PHYB | Yellow | On | Network connection on secondary connector is broken or self-test failed |
PHYB | Yellow | Blinking | Network topology on secondary connector is invalid |
PHYB | N/A | Off | Card is not receiving power |
My Books
