ETHERLINK II (3C503; ASSY.#2227) Network Card Settings and Configuration

NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	8-bit ISA
Topology	Linear Bus
Wiring Type	RG-58A/U 50ohm coaxial DIX transceiver via DB-15 port
Boot ROM	Available

BOOT ROM ADDRESS SELECTION
Address		JP1	JP2	JP3	JP4	JP5
»	Disabled	Closed	Open	Open	Open	Open
	C8000h	Open	Open	Open	Open	Closed
	CC000h	Open	Open	Open	Closed	Open
	D8000h	Open	Open	Closed	Open	Open
	DC000h	Open	Closed	Open	Open	Open

I/O BASE ADDRESS SELECTION
Address	JP6	JP7	JP8	JP9	JP10	JP11	JP12	JP13
250h	Open	Open	Open	Open	Closed	Open	Open	Open
280h	Open	Open	Open	Open	Open	Closed	Open	Open
2A0h	Open	Open	Open	Open	Open	Open	Closed	Open
2E0h	Open	Open	Open	Open	Open	Open	Open	Closed
300h	Closed	Open	Open	Open	Open	Open	Open	Open
310h	Open	Closed	Open	Open	Open	Open	Open	Open
330h	Open	Open	Closed	Open	Open	Open	Open	Open
350h	Open	Open	Open	Closed	Open	Open	Open	Open

MISCELLANEOUS TECHNICAL NOTES

The interrupt request and cable type are set using the software that comes with the card.