WESTERN DIGITAL CORPORATION
WD286-WDM2
Processor | 80286 |
Processor Speed | 12.5MHz |
Chip Set | Faraday |
Max. Onboard DRAM | 16MB |
Cache | None |
BIOS | AMI |
Dimensions | 330mm x 218mm |
I/O Options | Parallel port, serial porst (2), PS/2 mouse port, floppy drive interface, ST506/412 interface, video interface, IDE interface |
NPU Options | 80287 |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
IDE interface (optional) | J5 | Floppy drive interface | J16 |
Hard drive access LED | J10 | ST506/412 drive control | J17 |
Reset switch | J11 | Serial port 1 | J19 |
ST506/412 data (Drive 0) | J12 | Serial port 2 | J20 |
ST506/412 data (Drive 1) | J13 | Video interface | J21 |
Power LED & keylock | J14 | PS/2 mouse port | J22 |
Parallel port (LPT1) | J15 | Speaker | J24 |
USER CONFIGURABLE SETTINGS | |||
Function | Jumper | Position | |
» | Factory configured - do not alter | W2 | N/A |
» | Factory configured - do not alter | W4 | Open |
» | Factory configured - do not alter | W6 | Open |
» | Factory configured - do not alter | W7 | pins 1 & 2 closed |
» | Floppy drive IRQ6 enabled | W8 | Closed |
Floppy drive IRQ6 disabled | W8 | Open | |
» | Factory configured - do not alter | W9 | N/A |
» | Keyboard configuration XT compatible | W12 | Closed |
Keyboard configuration AT compatible | W12 | Open | |
» | Video IRQ9 enabled | W13 | Closed |
Video IRQ9 disabled | W13 | Open | |
» | Factory configured - do not alter | W14 | N/A |
» | Factory configured - do not alter | W15 | N/A |
» | Factory configured - do not alter | W16 | N/A |
» | Mouse IRQ12 enabled | W17 | Closed |
Mouse IRQ12 disabled | W17 | Open | |
» | LPT1 (J15) IRQ7 enabled | W19 | Closed |
LPT1 (J15) IRQ7 disabled | W19 | Open | |
» | COM2 (J20) IRQ3 enabled | W20 | Closed |
COM2 (J20) IRQ3 disabled | W20 | Open | |
» | COM1 (J19) IRQ4 enabled | W21 | Closed |
COM1 (J19) IRQ4 disabled | W21 | Open |
DRAM CONFIGURATION | ||
Size | Bank 0 | Bank 1 |
1MB | (2) 256K x 9 | (2) 256K x 9 |
2MB | (2) 1M x 9 | NONE |
4MB | (2) 1M x 9 | (2) 1M x 9 |
8MB | (2) 4M x 9 | NONE |
10MB | (2) 1M x 9 | (2) 4M x 9 |
16MB | (2) 4M x 9 | (2) 4M x 9 |
VIDEO JUMPER CONFIGURATION | ||||||
Internal video only | ||||||
Monitor type | SW1/1 | SW1/2 | SW1/3 | SW1/4 | SW1/5 | W18 |
Monochrome | Off | Off | On | Off | Off | Closed |
CGA-40 columns | On | Off | Off | On | Off | Open |
CGA-80 columns | Off | Off | Off | On | Off | Open |
EGA-200 lines | On | On | On | Off | Off | Open |
EGA-350/480 lines | Off | On | On | Off | Off | Open |
Internal video as primary-color/External video as secondary-monochrome | ||||||
Color monitor type | SW1/1 | SW1/2 | SW1/3 | SW1/4 | SW1/5 | W18 |
CGA-40 columns | On | Off | Off | On | Off | Open |
CGA-80 columns | Off | Off | Off | On | Off | Open |
EGA-200 lines | On | On | On | Off | Off | Open |
EGA-350/480 lines | Off | On | On | Off | Off | Open |
Internal video as secondary-color/External video as primary-monochrome | ||||||
Color monitor type | SW1/1 | SW1/2 | SW1/3 | SW1/4 | SW1/5 | W18 |
CGA-40 columns | On | On | On | On | Off | Open |
CGA-80 columns | Off | On | On | On | Off | Open |
EGA-200 lines | On | Off | On | On | Off | Open |
EGA-350/480 lines | Off | Off | On | On | Off | Open |
Internal video as primary-monochrome/External video as secondary-color | ||||||
Color monitor type | SW1/1 | SW1/2 | SW1/3 | SW1/4 | SW1/5 | W18 |
CGA-40 columns | On | Off | On | Off | Off | Open |
CGA-80 columns | Off | Off | On | Off | Off | Open |
Internal video as secondary-monochrome/External video as primary-color | ||||||
Color monitor type | SW1/1 | SW1/2 | SW1/3 | SW1/4 | SW1/5 | W18 |
CGA-40 columns | On | On | Off | On | Off | open |
CGA-80 columns | Off | On | Off | On | Off | open |
HARD DRIVE CONFIGURATION | ||||||
Drive type | W1 | W3 | W5 | W10 | W11 | W22 |
ST506/412 | Closed | Closed | Closed | Open | Open | Open |
IDE | Open | Open | Open | Closed | Closed | Closed |
External | Open | Open | Open | Open | Open | Open |
Note:An external hard drive may be used secondary to the ST506/412 with the ST506/412 jumper settings. |