G2-A 286 Motherboard Settings and Configuration

Processor	80286 (Exact location unknown)
Processor Speed	12/16MHz
Chip Set	Unknown
Max. Onboard DRAM	4MB
Cache	None
BIOS	AMI
Dimensions	220mm x 220mm
I/O Options	None
NPU Options	80287 (Exact location unknown)

CONNECTIONS
Purpose	Location	Purpose	Location
External battery	J3	Speaker	J8
Turbo LED	J5	Power LED & keylock	J9
Reset switch	J6	External memory card slot	S1
Turbo switch	J7

USER CONFIGURABLE SETTINGS
Function		Jumpe/Switchr	Position
»	Internal battery	J2	pins 1 & 2 closed
	External battery	J2	pins 2 & 3 closed
»	Power good signal detect from power supply	J4	pins 1 & 2 closed
	Power good signal detect from board	J4	pins 2 & 3 closed
»	Monitor type select color	SW1	pins 1 & 2 closed
	Monitor type select monochrome	SW1	pins 2 & 3 closed
»	RAM relocation enabled	SW2/switch 4	Off
	RAM relocation disabled	SW2/switch 4	On

DRAM CONFIGURATION
Size	Bank 0	Bank 1	Bank 2	Bank 3	SW2/1	SW2/2	SW2/3
512KB	(4) 44256	NONE	N/A	N/A	Off	Off	Off
1MB	(4) 44256	(4) 44256	N/A	N/A	Off	On	Off
2MB	N/A	N/A	(4) 256K x 9	NONE	On	Off	Off
4MB	N/A	N/A	(4) 256K x 9	(4) 256K x 9	On	On	Off
Note:Bank 2 & Bank 3 can be found on the external memory card. Memory card and Onboard memory cannot be used at the same time.