TYAN COMPUTER CORPORATION
S1694SA
Device Type | Mainboard |
Processor | Pentium II/Celeron |
Processor Speed | 133/166/233/266/300/333MHz |
Chip Set | Intel 440EX |
Maximum Onboard Memory | 512MB (EDO & SDRAM supported) |
Audio Chip Set | OPTI |
Cache | 0/128/256/512KB (located on the CPU) |
BIOS | Award |
Dimensions | 305mm x 244mm |
I/O Options | 32-bit PCI slots (2), floppy drive interface, game/MIDI port, green PC connector, IDE interfaces (2), parallel port, PS/2 mouse port, serial ports (2), IR connector, USB connectors (2), ATX power connector, AGP slot, line in, line out, microphone in, audio in CD-ROMs (2), wake on LAN connector |

CONNECTIONS | |||
Purpose | Location | Purpose | Location |
AGP slot | AGP | Soft off power supply | J13/pins 1 & 2 |
ATX power connector | ATX | Green PC connector | J13/pins 3 & 4 |
Game/MIDI port | CN1 | IR connector | J13/pins 6 10 |
Microphone in | CN2 | IDE interface LED | J13/pins 13 16 |
Line in | CN3 | Power LED | J13/pins 18 & 20 |
Line out | CN4 | Reset switch | J13/pins 22 & 23 |
Serial port 2 | CN5 | Speaker | J13/pins 24 - 27 |
Serial port 1 | CN6 | Chassis fan power | J15 |
Parallel port | CN7 | CPU fan power | J16 |
USB connector 1 | CN8 | Green PC connector | JP13 |
USB connector 2 | CN9 | Wake on LAN connector | JP14 |
PS/2 mouse port | CN10 | Audio in CD-ROM (Mitsumi) | JP20 |
IDE interface 2 | CN11 | Audio in CD-ROM (Panasonic) | JP21 |
IDE interface 1 | CN12 | Chassis intrusion connector | JP25 |
Floppy drive interface | CN13 | 32-bit PCI slots | PC1 PC2 |
Two color LED | D28 | ||
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
» | CMOS memory normal operation | JP15 | Pins 1 & 2 closed |
CMOS memory clear | JP15 | Pins 2 & 3 closed | |
On board sound disabled | JP23 | Closed | |
On board sound enabled | JP23 | Open | |
DIMM CONFIGURATION | ||
Size | Bank 0 | Bank 1 |
8MB | (1) 1M x 64 | None |
16MB | (1) 2M x 64 | None |
16MB | (1) 1M x 64 | (1) 1M x 64 |
24MB | (1) 2M x 64 | (1) 1M x 64 |
32MB | (1) 4M x 64 | None |
32MB | (1) 2M x 64 | (1) 2M x 64 |
40MB | (1) 4M x 64 | (1) 1M x 64 |
48MB | (1) 4M x 64 | (1) 2M x 64 |
64MB | (1) 8M x 64 | None |
64MB | (1) 4M x 64 | (1) 4M x 64 |
72MB | (1) 8M x 64 | (1) 1M x 64 |
80MB | (1) 8M x 64 | (1) 2M x 64 |
96MB | (1) 8M x 64 | (1) 4M x 64 |
128MB | (1) 16M x 64 | None |
DIMM CONFIGURATION (CONT) | ||
Size | Bank 0 | Bank 1 |
128MB | (1) 8M x 64 | (1) 8M x 64 |
136MB | (1) 16M x 64 | (1) 1M x 64 |
144MB | (1) 16M x 64 | (1) 2M x 64 |
160MB | (1) 16M x 64 | (1) 4M x 64 |
192MB | (1) 16M x 64 | (1) 8M x 64 |
256MB | (1) 16M x 64 | (1) 16M x 64 |
256MB | (1) 32M x 64 | None |
264MB | (1) 32M x 64 | (1) 1M x 64 |
272MB | (1) 32M x 64 | (1) 2M x 64 |
288MB | (1) 32M x 64 | (1) 4M x 64 |
320MB | (1) 32M x 64 | (1) 8M x 64 |
384MB | (1) 32M x 64 | (1) 16M x 64 |
512MB | (1) 32M x 64 | (1) 32M x 64 |
Note: Board accepts EDO & SDRAM memory. | ||
CACHE CONFIGURATION |
Note: 256KB/512KB cache is located on the Pentium II CPU. 128KB cache is located on the Celeron 300A & 333 CPU. |
CPU SPEED SELECTION | ||||||
CPU speed | Clock speed | Multiplier | JP8 | JP9 | JP10 | JP11 |
133MHz | 66MHz | 2x | Closed | Closed | Closed | Closed |
166MHz | 66MHz | 2.5x | Closed | Open | Closed | Closed |
200MHz | 66MHz | 3x | Closed | Closed | Open | Closed |
233MHz | 66MHz | 3.5x | Closed | Open | Open | Closed |
266MHz | 66MHz | 4x | Closed | Closed | Closed | Open |
300MHz | 66MHz | 4.5x | Closed | Open | Closed | Open |
333MHz | 66MHz | 5x | Closed | Closed | Open | Open |