QDI COMPUTER, INC.
P6I440EX/MATX
Device Type | Mainboard |
Processor | Pentium II/Celeron |
Processor Speed | 233/266/300/333MHz |
Chip Set | Intel 440EX |
Video Chip Set | None |
Maximum Onboard Memory | 512MB (EDO & SDRAM supported) |
Maximum Video Memory | None |
Cache | 0/128/256/512KB (located on the CPU) |
BIOS | Award |
Dimensions | 244mm x 177mm |
I/O Options | 32-bit PCI slots (2), floppy drive interface, green PC connector, IDE interfaces (2), parallel port, PS/2 mouse port, serial ports (2), IR connector, USB connectors (2), ATX power connector, AGP slot, wake on LAN connector, wake on modem connector |

CONNECTIONS | |||
Purpose | Location | Purpose | Location |
AGP slot | AGP | Chassis intrusion connector | C12 |
ATX power connector | ATX | Parallel port | CN1 |
IDE interface LED | C1 | Serial port 2 | CN2 |
Reset switch | C2 | Serial port 1 | CN3 |
Speaker | C3 | USB connector 1 | CN4 |
Power LED & keylock | C4 | USB connector 2 | CN5 |
Green PC LED | C5 | PS/2 mouse port | CN6 |
Green PC connector | C6 | Floppy drive interface | CN7 |
Power supply fan | C7 | IDE interface 2 | CN8 |
CPU fan power | C8 | IDE interface 1 | CN9 |
Chassis fan power | C9 | Auxiliary ATX power connector | J21 |
Wake on modem connector | C10 | IR connector | JP13 |
Wake on LAN connector | C11 | 32-bit PCI slots | PC1 – PC2 |
Note: The location of C12 is unidentified. | |||
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
» | Factory configured - do not alter | J1 | Unidentified |
» | CMOS memory normal operation | JCC | Pins 2 & 3 closed |
CMOS memory clear | JCC | Pins 1 & 2 closed | |
Note: The location of JCC is unidentified. | |||
DIMM CONFIGURATION | ||
Size | Bank 0 | Bank 1 |
8MB | (1) 1M x 64 | None |
16MB | (1) 2M x 64 | None |
16MB | (1) 1M x 64 | (1) 1M x 64 |
24MB | (1) 2M x 64 | (1) 1M x 64 |
32MB | (1) 4M x 64 | None |
32MB | (1) 2M x 64 | (1) 2M x 64 |
40MB | (1) 4M x 64 | (1) 1M x 64 |
48MB | (1) 4M x 64 | (1) 2M x 64 |
64MB | (1) 8M x 64 | None |
64MB | (1) 4M x 64 | (1) 4M x 64 |
72MB | (1) 8M x 64 | (1) 1M x 64 |
80MB | (1) 8M x 64 | (1) 2M x 64 |
96MB | (1) 8M x 64 | (1) 4M x 64 |
128MB | (1) 8M x 64 | (1) 8M x 64 |
128MB | (1) 16M x 64 | None |
DIMM CONFIGURATION (CON’T) | ||
Size | Bank 0 | Bank 1 |
136MB | (1) 16M x 64 | (1) 1M x 64 |
144MB | (1) 16M x 64 | (1) 2M x 64 |
160MB | (1) 16M x 64 | (1) 4M x 64 |
192MB | (1) 16M x 64 | (1) 8M x 64 |
256MB | (1) 16M x 64 | (1) 16M x 64 |
256MB | (1) 32M x 64 | None |
264MB | (1) 32M x 64 | (1) 1M x 64 |
272MB | (1) 32M x 64 | (1) 2M x 64 |
288MB | (1) 32M x 64 | (1) 4M x 64 |
320MB | (1) 32M x 64 | (1) 8M x 64 |
384MB | (1) 32M x 64 | (1) 16M x 64 |
512MB | (1) 32M x 64 | (1) 32M x 64 |
Note: Board accepts EDO & SDRAM memory. Maximum SDRAM is 256MB. Maximum EDO is 512MB. | ||
CACHE CONFIGURATION |
Note: 256KB/512KB cache is located on the Pentium II CPU. 128KB cache is located on the Celeron 300A & 333 CPU. |