HIPPO 10 486 Motherboard Settings and Configuration

OCEAN INFORMATION SYSTEMS, INC.

HIPPO 10 486

Processor
CX486S/UMCU5/80486SX/CX486DX/(SL)AM486DX/80486DX/ (SL)80486DX/CX486DX2/(SL)AM486DX2/80486DX2/SL80486DX2/ AM486DX4/(SL)AM486DX4/80486DX4/P24D/P24T
Processor Speed
25/33/40/50(internal)/50/66(internal)/80(internal)/100(internal)MHz
Chip Set
Unidentified
Video Chip Set
None
Maximum Onboard Memory
64MB
Maximum Video Memory
None
Cache
128/256/512KB
BIOS
Unidentified
Dimensions
254mm x 218mm
I/O Options
32-bit VESA local bus slots (2), floppy drive interface, game interface, green PC connector, IDE interfaces (2), parallel port, serial ports (2)
NPU Options
None

CONNECTIONS
Function
Label
Function
Label
Serial port 1
CN1
IDE interface 1
JP44
Serial port 2
CN2
IDE interface 2
JP45
Game interface
CN3
Chassis fan power
P3
Floppy drive interface
CN4
Turbo switch
P4
Parallel port
CN5
Turbo LED
P6
IDE interface 1
CN6
Reset switch
P7
IDE interface 2
CN7
Speaker
P8
External battery
JP1
Power LED & keylock
P9
Green PC connector
JP43
32-bit VESA local bus slots
SL1 & SL2

USER CONFIGURABLE SETTINGS
Setting
Label
Position
»
CMOS memory normal operation
JP1
Pins 2 & 3 closed

CMOS memory clear
JP1
Pins 3 & 4 closed
»
Factory configured - do not alter
JP2
Open
»
Factory configured - do not alter
JP3
Pins 1 & 2 closed
»
Factory configured - do not alter
JP4
Closed

Floppy drive interface enabled
JP7
Pins 1 & 2 closed

Floppy drive interface disabled
JP7
Pins 2 & 3 closed

Parallel port address select 378H
JP8
Pins 1 & 2 closed

Parallel port address select 278H
JP8
Pins 2 & 3 closed

Game port enabled
JP9
Pins 1 & 2 closed

Game port disabled
JP9
Pins 2 & 3 closed

Serial port 1 enabled
JP10
Pins 1 & 2 closed

Serial port 1 disabled
JP10
Pins 2 & 3 closed

Serial port 1 address select 3F8 - 3FFh
JP11
Pins 1 & 2 closed

Serial port 1 address select 3E8 - 3EFh
JP11
Pins 2 & 3 closed

Serial port 2 enabled
JP12
Pins 1 & 2 closed

Serial port 2 disabled
JP12
Pins 2 & 3 closed

Serial port 2 address select 2F8 - 2FFh
JP13
Pins 1 & 2 closed

Serial port 2 address select 2E8 - 2EFh
JP13
Pins 2 & 3 closed
»
Factory configured - do not alter
JP16
Open

IDE interface 2 enabled
JP19
Pins 1 & 2 closed

IDE interface 2 disabled
JP19
Pins 2 & 3 closed

IDE interface 1 enabled
JP20
Pins 1 & 2 closed

IDE interface 1 disabled
JP20
Pins 2 & 3 closed
»
Factory configured - do not alter
JP31
Closed
»
Factory configured - do not alter
JP42
Open
»
Factory configured - do not alter
JP47
Pins 2 & 3 closed
»
Factory configured - do not alter
JP49
Open
»
Factory configured - do not alter
JP50
Closed
»
Factory configured - do not alter
JP51
Open
»
Factory configured - do not alter
JP52
Closed

DRAM CONFIGURATION
Size
Bank 0
Bank 1
Bank 2
Bank 3
4MB
(1) 1M x 32
None
None
None
8MB
(1) 2M x 32
None
None
None
8MB
(1) 1M x 32
(1) 1M x 32
None
None
12MB
(1) 1M x 32
(1) 2M x 32
None
None
12MB
(1) 1M x 32
(1) 1M x 32
(1) 1M x 32
None
12MB
(1) 1M x 32
(1) 2M x 32
None
None
16MB
(1) 4M x 32
None
None
None
16MB
(1) 1M x 32
(1) 2M x 32
(1) 1M x 32
None
16MB
(1) 2M x 32
(1) 2M x 32
None
None
16MB
(1) 1M x 32
(1) 1M x 32
(1) 1M x 32
(1) 1M x 32
20MB
(1) 1M x 32
(1) 4M x 32
None
None
24MB
(1) 1M x 32
(1) 1M x 32
(1) 4M x 32
None
24MB
(1) 2M x 32
(1) 4M x 32
None
None
28MB
(1) 1M x 32
(1) 2M x 32
(1) 4M x 32
None
32MB
(1) 4M x 32
(1) 4M x 32
None
None
36MB
(1) 1M x 32
(1) 4M x 32
(1) 4M x 32
None
40MB
(1) 1M x 32
(1) 1M x 32
(1) 4M x 32
(1) 4M x 32
40MB
(1) 4M x 32
(1) 2M x 32
(1) 4M x 32
None
48MB
(1) 4M x 32
(1) 4M x 32
(1) 4M x 32
None
52MB
(1) 1M x 32
(1) 4M x 32
(1) 4M x 32
(1) 4M x 32
64MB
(1) 4M x 32
(1) 4M x 32
(1) 4M x 32
(1) 4M x 32

CACHE CONFIGURATION
Size
Bank 0
Bank 1
TAG
128KB
(4) 32K x 8
None
(1) 32K x 8
256KB (A)
(4) 64K x 8
None
(1) 32K x 8
256KB (B)
(4) 32K x 8
(4) 32K x 8
(1) 32K x 8
512KB
(4) 128K x 8
None
(1) 32K x 8

CACHE JUMPER CONFIGURATION
Size
JP21
JP22
JP23
JP24
128KB
Open
Open
2 & 3
1 & 2
256KB (A)
Open
Closed
2 & 3, 4 & 5
1 & 2
256KB (B)
Open
Closed
3 & 4
2 & 3
512KB
Closed
Closed
1 & 2, 3 & 4, 5 & 6
1 & 2

CPU SPEED SELECTION
Speed
JP28
JP29
JP30
25MHz
Open
Open
Closed
33MHz
Closed
Closed
Closed
40MHz
Open
Closed
Closed
50iMHz
Open
Open
Closed
50MHz
Closed
Open
Open
66iMHz
Closed
Closed
Closed
80iMHz
Open
Closed
Closed
100iMHz
Closed
Closed
Closed

CPU TYPE SELECTION
Type
JP32
JP33
JP34
JP35
CX486S
Open
2 & 3
2 & 3, 4 & 5
1 & 2, 3 & 4, 5 & 6
UMC U5
3 & 4
2 & 3
Open
2 & 3
80486SX
Open
2 & 3
Open
Open
CX486DX
1 & 2
1 & 2, 3 & 4
2 & 3
1 & 2, 3 & 4, 5 & 6
(SL)AM486DX
1 & 2
1 & 2, 3 & 4
1 & 2, 3 & 4
1 & 2
80486DX
1 & 2
1 & 2, 3 & 4
Open
Open
SL80486DX
1 & 2
1 & 2, 3 & 4
1 & 2, 3 & 4
1 & 2
CX486DX2
1 & 2
1 & 2, 3 & 4
2 & 3
1 & 2, 3 & 4, 5 & 6
AM486DX2
1 & 2, 3 & 4
1 & 2, 3 & 4
Open
2 & 3
(SL)AM486DX2
1 & 2
1 & 2, 3 & 4
1 & 2, 3 & 4
1 & 2
80486DX2
1 & 2
1 & 2, 3 & 4
Open
Open
SL80486DX2
1 & 2
1 & 2, 3 & 4
1 & 2, 3 & 4
1 & 2
AM486DX4
1 & 2, 3 & 4
1 & 2, 3 & 4
Open
2 & 3
(SL)AM486DX4
1 & 2
1 & 2, 3 & 4
1 & 2, 3 & 4
1 & 2
80486DX4
1 & 2
1 & 2, 3 & 4
1 & 2, 3 & 4
1 & 2
P24D
1 & 2
1 & 2, 3 & 4
1 & 2, 3 & 4
1 & 2, 4 & 5
P24T
2 & 3
1 & 2, 3 & 4
1 & 2, 3 & 4
1 & 2
Note: Pins designated should be in the closed position.

CPU TYPE SELECTION (CON’T)
Type
JP36
JP37
JP57
CX486S
2 & 3, 4 & 5
1 & 2, 3 & 4, 5 & 6
Open
UMC U5
1 & 2
2 & 3
Open
80486SX
Open
2 & 3
Open
CX486DX
2 & 3, 4 & 5
1 & 2, 3 & 4, 5 & 6
Open
(SL)AM486DX
5 & 6
1 & 2
Open
80486DX
Open
2 & 3
Open
SL80486DX
5 & 6
1 & 2
Open
CX486DX2
2 & 3, 4 & 5
1 & 2, 3 & 4, 5 & 6
Open
AM486DX2
1 & 2
2 & 3
2 & 3
(SL)AM486DX2
5 & 6
1 & 2
Open
80486DX2
Open
2 & 3
Open
SL80486DX2
5 & 6
1 & 2
Open
AM486DX4
1 & 2
2 & 3
1 & 2
(SL)AM486DX4
5 & 6
1 & 2
Open
80486DX4
5 & 6
1 & 2
Open
P24D
3 & 4, 5 & 6
1 & 2, 4 & 5
Open
P24T
5 & 6
1 & 2
Open
Note: Pins designated should be in the closed position.

CPU MULTIPLIER SELECTION
Multiplier
JP27
2x
Pins 2 & 3 closed
2.5x
Pins 1 & 2 closed
3x
Open

CPU VOLTAGE SELECTION
Voltage
JP46
JP48
JP53
JP54
JP55
JP56
3.45v/5v (auto)
Open
Open
Closed
Open
Open
Open
3.3v (fixed)
Open
Closed
Open
Open
Open
Open
3.45v (fixed)
Open
Open
Open
Open
Open
Open
3.6v (fixed)
Closed
Open
Open
Open
Open
Open
3.8v (fixed)
Open
Open
Open
Open
Closed
Open
4v (fixed)
Open
Open
Open
Open
Open
Closed
5v (fixed)
Open
Open
Open
Closed
Open
Open

VL BUS WAIT STATE SELECTION
Setting
JP25
0
Open
1
Closed

VL-BUS SPEED SELECTION
Setting
JP26
<= 33MHz
Open
>33 MHz
Closed

IDE SPEED SELECTION
Speed
JP17
JP18
Slow
Pins 1 & 2 closed
Pins 2 & 3 closed
Slower
Pins 1 & 2 closed
Pins 1 & 2 closed
Fast
Pins 2 & 3 closed
Pins 1 & 2 closed
Faster
Pins 2 & 3 closed
Pins 2 & 3 closed

PARALLEL PORT SELECTION
Setting
JP5
JP6
Disabled
Pins 2 & 3 closed
Pins 2 & 3 closed
SPP mode
Pins 1 & 2 closed
Pins 2 & 3 closed
EPP mode
Pins 2 & 3 closed
Pins 1 & 2 closed
ECP mode
Pins 1 & 2 closed
Pins 1 & 2 closed

Headaches Begone! A Systemic Approach To Healing Your Headaches

Don't Let Your Bike Seat Ruin Your Sex Life Book

HIPPO 10 486 Motherboard Settings and Configuration

Search

My Books

Discover

Processor	CX486S/UMCU5/80486SX/CX486DX/(SL)AM486DX/80486DX/ (SL)80486DX/CX486DX2/(SL)AM486DX2/80486DX2/SL80486DX2/ AM486DX4/(SL)AM486DX4/80486DX4/P24D/P24T
Processor Speed	25/33/40/50(internal)/50/66(internal)/80(internal)/100(internal)MHz
Chip Set	Unidentified
Video Chip Set	None
Maximum Onboard Memory	64MB
Maximum Video Memory	None
Cache	128/256/512KB
BIOS	Unidentified
Dimensions	254mm x 218mm
I/O Options	32-bit VESA local bus slots (2), floppy drive interface, game interface, green PC connector, IDE interfaces (2), parallel port, serial ports (2)
NPU Options	None

CONNECTIONS
Function	Label	Function	Label
Serial port 1	CN1	IDE interface 1	JP44
Serial port 2	CN2	IDE interface 2	JP45
Game interface	CN3	Chassis fan power	P3
Floppy drive interface	CN4	Turbo switch	P4
Parallel port	CN5	Turbo LED	P6
IDE interface 1	CN6	Reset switch	P7
IDE interface 2	CN7	Speaker	P8
External battery	JP1	Power LED & keylock	P9
Green PC connector	JP43	32-bit VESA local bus slots	SL1 & SL2

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	CMOS memory normal operation	JP1	Pins 2 & 3 closed
	CMOS memory clear	JP1	Pins 3 & 4 closed
»	Factory configured - do not alter	JP2	Open
»	Factory configured - do not alter	JP3	Pins 1 & 2 closed
»	Factory configured - do not alter	JP4	Closed
	Floppy drive interface enabled	JP7	Pins 1 & 2 closed
	Floppy drive interface disabled	JP7	Pins 2 & 3 closed
	Parallel port address select 378H	JP8	Pins 1 & 2 closed
	Parallel port address select 278H	JP8	Pins 2 & 3 closed
	Game port enabled	JP9	Pins 1 & 2 closed
	Game port disabled	JP9	Pins 2 & 3 closed
	Serial port 1 enabled	JP10	Pins 1 & 2 closed
	Serial port 1 disabled	JP10	Pins 2 & 3 closed
	Serial port 1 address select 3F8 - 3FFh	JP11	Pins 1 & 2 closed
	Serial port 1 address select 3E8 - 3EFh	JP11	Pins 2 & 3 closed
	Serial port 2 enabled	JP12	Pins 1 & 2 closed
	Serial port 2 disabled	JP12	Pins 2 & 3 closed
	Serial port 2 address select 2F8 - 2FFh	JP13	Pins 1 & 2 closed
	Serial port 2 address select 2E8 - 2EFh	JP13	Pins 2 & 3 closed
»	Factory configured - do not alter	JP16	Open
	IDE interface 2 enabled	JP19	Pins 1 & 2 closed
	IDE interface 2 disabled	JP19	Pins 2 & 3 closed
	IDE interface 1 enabled	JP20	Pins 1 & 2 closed
	IDE interface 1 disabled	JP20	Pins 2 & 3 closed
»	Factory configured - do not alter	JP31	Closed
»	Factory configured - do not alter	JP42	Open
»	Factory configured - do not alter	JP47	Pins 2 & 3 closed
»	Factory configured - do not alter	JP49	Open
»	Factory configured - do not alter	JP50	Closed
»	Factory configured - do not alter	JP51	Open
»	Factory configured - do not alter	JP52	Closed

DRAM CONFIGURATION
Size	Bank 0	Bank 1	Bank 2	Bank 3
4MB	(1) 1M x 32	None	None	None
8MB	(1) 2M x 32	None	None	None
8MB	(1) 1M x 32	(1) 1M x 32	None	None
12MB	(1) 1M x 32	(1) 2M x 32	None	None
12MB	(1) 1M x 32	(1) 1M x 32	(1) 1M x 32	None
12MB	(1) 1M x 32	(1) 2M x 32	None	None
16MB	(1) 4M x 32	None	None	None
16MB	(1) 1M x 32	(1) 2M x 32	(1) 1M x 32	None
16MB	(1) 2M x 32	(1) 2M x 32	None	None
16MB	(1) 1M x 32	(1) 1M x 32	(1) 1M x 32	(1) 1M x 32
20MB	(1) 1M x 32	(1) 4M x 32	None	None
24MB	(1) 1M x 32	(1) 1M x 32	(1) 4M x 32	None
24MB	(1) 2M x 32	(1) 4M x 32	None	None
28MB	(1) 1M x 32	(1) 2M x 32	(1) 4M x 32	None
32MB	(1) 4M x 32	(1) 4M x 32	None	None
36MB	(1) 1M x 32	(1) 4M x 32	(1) 4M x 32	None
40MB	(1) 1M x 32	(1) 1M x 32	(1) 4M x 32	(1) 4M x 32
40MB	(1) 4M x 32	(1) 2M x 32	(1) 4M x 32	None
48MB	(1) 4M x 32	(1) 4M x 32	(1) 4M x 32	None
52MB	(1) 1M x 32	(1) 4M x 32	(1) 4M x 32	(1) 4M x 32
64MB	(1) 4M x 32	(1) 4M x 32	(1) 4M x 32	(1) 4M x 32

CACHE CONFIGURATION
Size	Bank 0	Bank 1	TAG
128KB	(4) 32K x 8	None	(1) 32K x 8
256KB (A)	(4) 64K x 8	None	(1) 32K x 8
256KB (B)	(4) 32K x 8	(4) 32K x 8	(1) 32K x 8
512KB	(4) 128K x 8	None	(1) 32K x 8

CACHE JUMPER CONFIGURATION
Size	JP21	JP22	JP23	JP24
128KB	Open	Open	2 & 3	1 & 2
256KB (A)	Open	Closed	2 & 3, 4 & 5	1 & 2
256KB (B)	Open	Closed	3 & 4	2 & 3
512KB	Closed	Closed	1 & 2, 3 & 4, 5 & 6	1 & 2

CPU SPEED SELECTION
Speed	JP28	JP29	JP30
25MHz	Open	Open	Closed
33MHz	Closed	Closed	Closed
40MHz	Open	Closed	Closed
50iMHz	Open	Open	Closed
50MHz	Closed	Open	Open
66iMHz	Closed	Closed	Closed
80iMHz	Open	Closed	Closed
100iMHz	Closed	Closed	Closed

CPU TYPE SELECTION
Type	JP32	JP33	JP34	JP35
CX486S	Open	2 & 3	2 & 3, 4 & 5	1 & 2, 3 & 4, 5 & 6
UMC U5	3 & 4	2 & 3	Open	2 & 3
80486SX	Open	2 & 3	Open	Open
CX486DX	1 & 2	1 & 2, 3 & 4	2 & 3	1 & 2, 3 & 4, 5 & 6
(SL)AM486DX	1 & 2	1 & 2, 3 & 4	1 & 2, 3 & 4	1 & 2
80486DX	1 & 2	1 & 2, 3 & 4	Open	Open
SL80486DX	1 & 2	1 & 2, 3 & 4	1 & 2, 3 & 4	1 & 2
CX486DX2	1 & 2	1 & 2, 3 & 4	2 & 3	1 & 2, 3 & 4, 5 & 6
AM486DX2	1 & 2, 3 & 4	1 & 2, 3 & 4	Open	2 & 3
(SL)AM486DX2	1 & 2	1 & 2, 3 & 4	1 & 2, 3 & 4	1 & 2
80486DX2	1 & 2	1 & 2, 3 & 4	Open	Open
SL80486DX2	1 & 2	1 & 2, 3 & 4	1 & 2, 3 & 4	1 & 2
AM486DX4	1 & 2, 3 & 4	1 & 2, 3 & 4	Open	2 & 3
(SL)AM486DX4	1 & 2	1 & 2, 3 & 4	1 & 2, 3 & 4	1 & 2
80486DX4	1 & 2	1 & 2, 3 & 4	1 & 2, 3 & 4	1 & 2
P24D	1 & 2	1 & 2, 3 & 4	1 & 2, 3 & 4	1 & 2, 4 & 5
P24T	2 & 3	1 & 2, 3 & 4	1 & 2, 3 & 4	1 & 2
Note: Pins designated should be in the closed position.

CPU TYPE SELECTION (CON’T)
Type	JP36	JP37	JP57
CX486S	2 & 3, 4 & 5	1 & 2, 3 & 4, 5 & 6	Open
UMC U5	1 & 2	2 & 3	Open
80486SX	Open	2 & 3	Open
CX486DX	2 & 3, 4 & 5	1 & 2, 3 & 4, 5 & 6	Open
(SL)AM486DX	5 & 6	1 & 2	Open
80486DX	Open	2 & 3	Open
SL80486DX	5 & 6	1 & 2	Open
CX486DX2	2 & 3, 4 & 5	1 & 2, 3 & 4, 5 & 6	Open
AM486DX2	1 & 2	2 & 3	2 & 3
(SL)AM486DX2	5 & 6	1 & 2	Open
80486DX2	Open	2 & 3	Open
SL80486DX2	5 & 6	1 & 2	Open
AM486DX4	1 & 2	2 & 3	1 & 2
(SL)AM486DX4	5 & 6	1 & 2	Open
80486DX4	5 & 6	1 & 2	Open
P24D	3 & 4, 5 & 6	1 & 2, 4 & 5	Open
P24T	5 & 6	1 & 2	Open
Note: Pins designated should be in the closed position.

CPU MULTIPLIER SELECTION
Multiplier	JP27
2x	Pins 2 & 3 closed
2.5x	Pins 1 & 2 closed
3x	Open

CPU VOLTAGE SELECTION
Voltage	JP46	JP48	JP53	JP54	JP55	JP56
3.45v/5v (auto)	Open	Open	Closed	Open	Open	Open
3.3v (fixed)	Open	Closed	Open	Open	Open	Open
3.45v (fixed)	Open	Open	Open	Open	Open	Open
3.6v (fixed)	Closed	Open	Open	Open	Open	Open
3.8v (fixed)	Open	Open	Open	Open	Closed	Open
4v (fixed)	Open	Open	Open	Open	Open	Closed
5v (fixed)	Open	Open	Open	Closed	Open	Open

VL BUS WAIT STATE SELECTION
Setting	JP25
0	Open
1	Closed

VL-BUS SPEED SELECTION
Setting	JP26
<= 33MHz	Open
>33 MHz	Closed

IDE SPEED SELECTION
Speed	JP17	JP18
Slow	Pins 1 & 2 closed	Pins 2 & 3 closed
Slower	Pins 1 & 2 closed	Pins 1 & 2 closed
Fast	Pins 2 & 3 closed	Pins 1 & 2 closed
Faster	Pins 2 & 3 closed	Pins 2 & 3 closed

PARALLEL PORT SELECTION
Setting	JP5	JP6
Disabled	Pins 2 & 3 closed	Pins 2 & 3 closed
SPP mode	Pins 1 & 2 closed	Pins 2 & 3 closed
EPP mode	Pins 2 & 3 closed	Pins 1 & 2 closed
ECP mode	Pins 1 & 2 closed	Pins 1 & 2 closed