POWERMATE 325 Motherboard Settings and Configuration

Processor	80386SX
Processor Speed	25MHz
Chip Set	Oak
Max. Onboard DRAM	20MB
Cache	None
BIOS	NEC
Dimensions	330mm x 218mm
I/O Options	Floppy drive interface, IDE interface, multifunction connector (PS/2 mouse, PS/2 keyboard, power LED) parallel port, proprietary ISA riser card slot, serial port, VGA port
NPU Options	80387SX

CONNECTIONS
Purpose	Location	Purpose	Location
IDE interface	J7	Speaker	JP1
Floppy drive interface	J8	Serial port	P1
External battery	J13	VGA port	P3
IDE interface LED	J14	Parallel port	P4
Proprietary EISA riser card slot	J16	Multifunction connector	P5

USER CONFIGURABLE SETTINGS
Function		Jumper/Switch	Position
»	Flash BIOS programmable via network disabled	J15	pins 1 & 2 closed
	Flash BIOS programmable via network enabled	J15	pins 2 & 3 closed
»	Onboard video enabled	SW1/1	Off
	Onboard video disabled	SW1/1	On
»	Floppy interface (J8) enabled	SW1/2	Off
	Floppy interface (J8) disabled	SW1/2	On
»	System password enabled	SW1/3	Off
	System password disabled & cleared	SW1/3	On
»	Flash BIOS write enabled	SW1/4	Off
	Flash BIOS write disabled	SW1/4	On

DRAM CONFIGURATION
Size	Bank 0	Bank 1	Bank 2	Bank 3
2MB	(2) 1M x 9	NONE	NONE	NONE
4MB	(2) 1M x 9	(2) 1M x 9	NONE	NONE
6MB	(2) 1M x 9	(2) 1M x 9	(2) 1M x 9	NONE
8MB	(2) 1M x 9	(2) 1M x 9	(2) 1M x 9	(2) 1M x 9
10MB	(2) 1M x 9	NONE	(2) 4M x 9	NONE
12MB	(2) 1M x 9	(2) 1M x 9	(2) 4M x 9	NONE
18MB	(2) 1M x 9	NONE	(2) 4M x 9	(2) 4M x 9
20MB	(2) 1M x 9	(2) 1M x 9	(2) 4M x 9	(2) 4M x 9
Note:Bank 0 is soldered on the main board. 18MB and 20MB configurations require NEC EMS driver.