MOTOROLA, INC.
6560 MPROUTER PRO
Card Type | Router |
Processor | Motorola 68060 |
Processor Speed | 50MHz |
Chip Set | Unidentified |
Maximum Onboard Memory | 24MB DRAM, 512KB battery-backup DRAM, Flash RAM for storage |
BIOS | Unidentified |
Dimensions | 254mm x 218mm |
I/O Options | Serial ports (4), Ethernet AUI port (1) |
NPU Options | None |
Network Transfer Rate | 10Mbps |
Topology | Linear Bus |
Wiring Type | AUI transceiver via DB-15 port |

CONNECTIONS | |||
Purpose | Location | Purpose | Location |
Diagnostic display | LED4 | Connector from mainboard | P9B |
Serial port 1 (V.11, V.24, V.35, V.36, or DSU) | P3 | Data compression module SIMM | S2 |
Serial port 2 (V.11, V.24, V.35, V.36, or DSU) | P4 | Battery-backup DRAM SIMM | S3 |
Serial port 3 (V.36 only) | P5 | Backup Flash RAM SIMM | S4 |
AUI transceiver via DB-15 port | P6 | Flash RAM SIMM | S5 |
Serial port 4 (V.24 only) | P8 | 16-bit ISA slots | SL1-SL8 |
Connector to front panel LEDs | P9A | Reset switch | SW4 |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
» | Ring Indicator for port 1 enabled | SW1/9 | On |
Ring Indicator for port 1 disabled | SW1/9 | Off | |
» | Busy out for port 1 enabled | SW1/10 | On |
Busy out for port 1 disabled | SW1/10 | Off | |
» | Ring Indicator for port 2 enabled | SW2/9 | On |
Ring Indicator for port 2 disabled | SW2/9 | Off | |
» | Busy out for port 2 enabled | SW2/10 | On |
Busy out for port 2 disabled | SW2/10 | Off | |
PROCESSOR DRAM CONFIGURATION | ||
Size | On Board | Bank 0 |
8MB | 8MB | None |
16MB | 8MB | (4) 2M x 9 |
Note:This memory is accessible only by the CPU and mainboard functions. The location of the onboard memory is unidentified. | ||
GLOBAL DRAM CONFIGURATION | ||
Size | On Board | Bank 1 |
4MB | 4MB | None |
8MB | 4MB | (1) 4M x 9 |
Note:This memory is accessible by the mainboard and all cards installed in the system. The location of the onboard memory is unidentified. | ||
PORT 1 TYPE | ||||||
Setting | SW1/1 | SW1/2 | SW1/3 | SW1/4 | SW1/5 | SW1/6 |
V.11 DTE | Off | Off | Off | Off | Off | On |
V.11 DCE | Off | Off | Off | Off | Off | On |
V.24 DTE | On | On | On | On | On | Off |
V.24 DCE | On | On | On | On | On | Off |
V.35 DTE | Off | Off | Off | Off | Off | On |
V.35 DCE | Off | Off | Off | Off | Off | On |
V.36 DTE | Off | Off | Off | Off | Off | On |
V.36 DCE | Off | Off | Off | Off | Off | On |
DSU | Off | Off | Off | Off | Off | On |
PORT 1 TYPE (CON’T) | |||
Setting | SW1/7 | SW1/8 | U1 |
V.11 DTE | On | On | V.11 module in position 1 |
V.11 DCE | On | On | V.11 module in position 2 |
V.24 DTE | Off | Off | V.24 module in position 1 |
V.24 DCE | Off | Off | V.24 module in position 2 |
V.35 DTE | On | On | V.35 module in position 1 |
V.35 DCE | On | On | V.35 module in position 2 |
V.36 DTE | On | On | V.36 module in position 1 |
V.36 DCE | On | On | V.36 module in position 2 |
DSU | On | On | DSU module in position 1 |
PORT 2 TYPE | ||||||
Setting | SW2/1 | SW2/2 | SW2/3 | SW2/4 | SW2/5 | SW2/6 |
V.11 DTE | Off | Off | Off | Off | Off | On |
V.11 DCE | Off | Off | Off | Off | Off | On |
V.24 DTE | On | On | On | On | On | Off |
V.24 DCE | On | On | On | On | On | Off |
V.35 DTE | Off | Off | Off | Off | Off | On |
V.35 DCE | Off | Off | Off | Off | Off | On |
V.36 DTE | Off | Off | Off | Off | Off | On |
V.36 DCE | Off | Off | Off | Off | Off | On |
DSU | Off | Off | Off | Off | Off | On |
PORT 2 TYPE (CON’T) | |||
Setting | SW2/7 | SW2/8 | U2 |
V.11 DTE | On | On | V.11 module in position 1 |
V.11 DCE | On | On | V.11 module in position 2 |
V.24 DTE | Off | Off | V.24 module in position 1 |
V.24 DCE | Off | Off | V.24 module in position 2 |
V.35 DTE | On | On | V.35 module in position 1 |
V.35 DCE | On | On | V.35 module in position 2 |
V.36 DTE | On | On | V.36 module in position 1 |
V.36 DCE | On | On | V.36 module in position 2 |
DSU | On | On | DSU module in position 1 |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Green | On | Power is on |
LED1 | Green | Off | Power is off |
LED2 | Green | On | Router is performing diagnostic or is downloading new software |
LED2 | Green | Off | Router is functioning normally |
LED3 | Yellow | On | Router has failed |
LED3 | Yellow | Off | Router is functioning normally |
MISCELLANEOUS TECHNICAL NOTES |
This router uses add-in ISA cards for its physical connections to networks. For add-in cards, see documents N1742 through N1744, V2430 through V2436, V2460, and V2461. |