PB5400T Motherboard Settings and Configuration

MITAC INTERNATIONAL CORPORATION

PB5400T

Processor
Pentium
Processor Speed
75/90/100/120/133/150/166MHz
Chip Set
Intel
Video Chip Set
None
Maximum Onboard Memory
256MB (EDO supported)
Maximum Video Memory
None
Cache
256/512KB
BIOS
Award
Dimensions
254mm x 218mm
I/O Options
32-bit PCI slots (4), floppy drive interface, green PC connector, IDE interfaces (2), parallel port, PS/2 mouse port, serial ports (2), cache slot
NPU Options
None

CONNECTIONS
Purpose
Location
Purpose
Location
PS/2 mouse port
J2
Speaker
J16
Parallel port
J7
Reset switch
J17
Serial port 2
J8
IDE interface LED
J18
Serial port 1
J9
Green PC connector
J19
Floppy drive interface
J11
Power LED & keylock
J21
Chassis fan power
J12
Cache slot
SL1
IDE interface 1
J14
32-bit PCI slots
PC1 - PC4
IDE interface 2
J15

USER CONFIGURABLE SETTINGS
Function
Label
Position
»
CMOS memory normal operation
JP3
Pins 2 & 3 closed

CMOS memory clear
JP3
Pins 1 & 2 closed

Voltage source select VCC2/VCC3
JP6
Open

Voltage source select VCC3
JP6
Closed

DRAM CONFIGURATION
Size
Bank 0
Bank 1
4MB
(2) 512K x 36
None
8MB
(2) 1M x 36
None
8MB
(2) 512K x 36
(2) 512K x 36
16MB
(2) 2M x 36
None
16MB
(2) 1M x 36
(2) 1M x 36
32MB
(2) 4M x 36
None
32MB
(2) 2M x 36
(2) 2M x 36
64MB
(2) 8M x 36
None
64MB
(2) 4M x 36
(2) 4M x 36
128MB
(2) 8M x 36
(2) 8M x 36
128MB
(2) 16M x 36
None
256MB
(2) 16M x 36
(2) 16M x 36
Note: Board accepts EDO memory. Board also accepts x 32 SIMMs. Banks are interchangeable.

CACHE CONFIGURATION
Size
Bank 0
SL1
256KB
(2) 32K x 32
Not installed
512KB
(2) 32K x 32
256KB module installed
512KB
None
512KB module installed

CACHE JUMPER CONFIGURATION
Size
JP100
256KB
Open
512KB
Closed

ON BOARD CACHE SIZE CONFIGURATION
Size
JP2
0KB
Open
256KB
Closed

ON BOARD CACHE CONFIGURATION
Size
JP101
Enabled
Pins 1 & 2 closed
Disabled
Pins 2 & 3 closed
Note: If 512KB cache is installed at SL1, disable on board cache.

CPU SPEED SELECTION
CPU speed
Clock speed
Multiplier
JP4
JP5
75MHz
50MHz
1.5x
1 & 2, 3 & 4
Open
90MHz
60MHz
1.5x
3 & 4
Open
100MHz
66MHz
1.5x
1 & 2
Open
120MHz
60MHz
2x
3 & 4
1 & 2
133MHz
66MHz
2x
1 & 2
1 & 2
150MHz
60MHz
2.5x
3 & 4
3 & 4
166MHz
66MHz
2.5x
1 & 2
1 & 2, 3 & 4
Note: Pins designated should be in the closed position.

CPU TYPE SELECTION
Type
JP102
P54C
Pins 1 & 2 closed
P55C
Pins 2 & 3 closed

CPU VOLTAGE SELECTION
Voltage
JP7
3.3v (STD)
Open
3.5v (VRE)
Closed

Headaches Begone! A Systemic Approach To Healing Your Headaches

Don't Let Your Bike Seat Ruin Your Sex Life Book

PB5400T Motherboard Settings and Configuration

Search

My Books

Discover

Processor	Pentium
Processor Speed	75/90/100/120/133/150/166MHz
Chip Set	Intel
Video Chip Set	None
Maximum Onboard Memory	256MB (EDO supported)
Maximum Video Memory	None
Cache	256/512KB
BIOS	Award
Dimensions	254mm x 218mm
I/O Options	32-bit PCI slots (4), floppy drive interface, green PC connector, IDE interfaces (2), parallel port, PS/2 mouse port, serial ports (2), cache slot
NPU Options	None

CONNECTIONS
Purpose	Location	Purpose	Location
PS/2 mouse port	J2	Speaker	J16
Parallel port	J7	Reset switch	J17
Serial port 2	J8	IDE interface LED	J18
Serial port 1	J9	Green PC connector	J19
Floppy drive interface	J11	Power LED & keylock	J21
Chassis fan power	J12	Cache slot	SL1
IDE interface 1	J14	32-bit PCI slots	PC1 - PC4
IDE interface 2	J15

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	CMOS memory normal operation	JP3	Pins 2 & 3 closed
	CMOS memory clear	JP3	Pins 1 & 2 closed
	Voltage source select VCC2/VCC3	JP6	Open
	Voltage source select VCC3	JP6	Closed

DRAM CONFIGURATION
Size	Bank 0	Bank 1
4MB	(2) 512K x 36	None
8MB	(2) 1M x 36	None
8MB	(2) 512K x 36	(2) 512K x 36
16MB	(2) 2M x 36	None
16MB	(2) 1M x 36	(2) 1M x 36
32MB	(2) 4M x 36	None
32MB	(2) 2M x 36	(2) 2M x 36
64MB	(2) 8M x 36	None
64MB	(2) 4M x 36	(2) 4M x 36
128MB	(2) 8M x 36	(2) 8M x 36
128MB	(2) 16M x 36	None
256MB	(2) 16M x 36	(2) 16M x 36
Note: Board accepts EDO memory. Board also accepts x 32 SIMMs. Banks are interchangeable.

CACHE CONFIGURATION
Size	Bank 0	SL1
256KB	(2) 32K x 32	Not installed
512KB	(2) 32K x 32	256KB module installed
512KB	None	512KB module installed

CACHE JUMPER CONFIGURATION
Size	JP100
256KB	Open
512KB	Closed

ON BOARD CACHE SIZE CONFIGURATION
Size	JP2
0KB	Open
256KB	Closed

ON BOARD CACHE CONFIGURATION
Size	JP101
Enabled	Pins 1 & 2 closed
Disabled	Pins 2 & 3 closed
Note: If 512KB cache is installed at SL1, disable on board cache.

CPU SPEED SELECTION
CPU speed	Clock speed	Multiplier	JP4	JP5
75MHz	50MHz	1.5x	1 & 2, 3 & 4	Open
90MHz	60MHz	1.5x	3 & 4	Open
100MHz	66MHz	1.5x	1 & 2	Open
120MHz	60MHz	2x	3 & 4	1 & 2
133MHz	66MHz	2x	1 & 2	1 & 2
150MHz	60MHz	2.5x	3 & 4	3 & 4
166MHz	66MHz	2.5x	1 & 2	1 & 2, 3 & 4
Note: Pins designated should be in the closed position.

CPU TYPE SELECTION
Type	JP102
P54C	Pins 1 & 2 closed
P55C	Pins 2 & 3 closed

CPU VOLTAGE SELECTION
Voltage	JP7
3.3v (STD)	Open
3.5v (VRE)	Closed