7065 Motherboard Settings and Configuration

Processor	80386SX
Processor Speed	16MHz
Chip Set	Unidentified
Video Chip Set	None
Maximum Onboard Memory	8MB
Maximum Video Memory	None
Cache	None
BIOS	Phoenix
Dimensions	330mm x 218mm
I/O Options	Floppy drive interface, parallel port, serial ports (2)
NPU Options	80387SX

CONNECTIONS
Purpose	Location	Purpose	Location
Serial port 2	J13	Speaker	J19
Serial port 1	J14	Power LED & keylock	J20
Parallel port	J15	External battery	J21
Reset switch	J16	Keyboard connector	J22
Floppy drive interface	J17

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured - do not alter	JP1	Unidentified
»	Factory configured - do not alter	JP2	Unidentified
»	Factory configured - do not alter	JP3	Unidentified
»	Factory configured - do not alter	JP4	Unidentified
»	Parallel port IRQ select IRQ7	JP5	Pins 1 & 2 closed
	Parallel port IRQ select IRQ5	JP5	Pins 2 & 3 closed
»	Serial port 2 IRQ select IRQ3	JP6	Pins 2 & 3 closed
	Serial port 2 IRQ select IRQ4	JP6	Pins 1 & 2 closed
»	Serial port 1 IRQ select IRQ4	JP7	Pins 2 & 3 closed
	Serial port 1 IRQ select IRQ3	JP7	Pins 1 & 2 closed
»	Parallel port address select 378h	JP8	Pins 2 & 3 closed
	Parallel port address select 278h	JP8	Pins 1 & 2 closed
»	Serial port 2 address select 2F8h	JP9	Pins 1 & 2 closed
	Serial port 2 address select 3F8h	JP9	Pins 2 & 3 closed
»	Serial port 1 address select 3F8h	JP10	Pins 2 & 3 closed
	Serial port 1 address select 2F8h	JP10	Pins 1 & 2 closed
»	IDE interface not installed	JP11	Pins 2 & 3 closed
	IDE interface installed	JP11	Pins 1 & 2 closed
»	Floppy drive interface enabled	JP12	Pins 1 & 2 closed
	Floppy drive interface disabled	JP12	Pins 2 & 3 closed
»	Floppy drive address select 3FXh	JP13	Pins 2 & 3 closed
	Floppy drive address select 37Xh	JP13	Pins 1 & 2 closed
»	Factory configured - do not alter	JP14	Unidentified
»	Factory configured - do not alter	JP15	Unidentified
»	Factory configured - do not alter	JP16	Unidentified
»	Factory configured - do not alter	JP17	Unidentified
»	Factory configured - do not alter	JP18	Unidentified
»	Factory configured - do not alter	JP19	Unidentified
»	Factory configured - do not alter (8042 test select)	JP22	Pins 2 & 3 closed
»	Factory configured - do not alter	JP23	Unidentified
»	NPU not installed	JP24	Pins 2 & 3 closed
	NPU installed	JP24	Pins 1 & 2 closed
»	Monitor type select monochrome	SW1	Pins 2 & 3 closed
	Monitor type select color	SW1	Pins 1 & 2 closed

DRAM CONFIGURATION
Size	Bank 0	Bank 1
1MB	(4) 256K x 9	None
2MB	(4) 256K x 9	(4) 256K x 9
4MB	(4) 1M x 9	None
8MB	(4) 1M x 9	(4) 1M x 9
Note: The location of banks 0 & 1 are unidentified.

I/O EXPANSION SLOT SPEED SELECTION
Speed	JP20	JP21
8MHz	Closed	Open
10MHz	Open	Closed