5VP3 Motherboard Settings and Configuration

Device Type	Mainboard
Processor	CX 6X86/CX 6X86L/CX 686MX/CX M II/AM K5/AM K6/ AM K6-2/Pentium/Pentium MMX
Processor Speed	75/90/100/120/133/150/166/180/200/233/266/300MHz
Chip Set	VIA VP3
Video Chip Set	None
Maximum Onboard Memory	256MB (EDO & SDRAM supported)
Maximum Video Memory	None
Cache	512KB
BIOS	Award
Dimensions	240mm x 220mm
I/O Options	32-bit PCI slots (3), floppy drive interface, green PC connector, IDE interfaces (2), parallel port, PS/2 mouse interface, serial ports (2), IR connector, USB connector, ATX power connector, AGP slot

CONNECTIONS
Purpose	Location	Purpose	Location
AGP slot	AGP	IDE interface 2	CN10
ATX power connector	ATX	IDE interface 1	CN11
Chassis fan power	C1	Power LED & keylock	J1/pins 1 – 5
Turbo LED	C2	Speaker	J1/pins 7 – 10
Serial port 1	CN1	Reset switch	J1/pins 12 & 13
PS/2 mouse interface	CN4	D LED	J1/pins 15 & 16
Serial port 2	CN5	Soft off power supply	J1/pins 18 & 19
IR connector	CN7	IDE interface LED	J1/pins 21 & 22
Parallel port	CN8	USB connector	JP2
Floppy drive interface	CN9	32-bit PCI slots	PC1 – PC3

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured - do not alter	CN2	Unidentified
	Flash BIOS voltage select 12v	JP1	Pins 2 & 3 closed
	Flash BIOS voltage select 5v	JP1	Pins 1 & 2 closed
»	CMOS memory normal operation	JP3	Pins 1 & 2 closed
	CMOS memory clear	JP3	Pins 2 & 3 closed
	Power supply select AT	JP4	Pins 1 & 2 closed
	Power supply select ATX	JP4	Pins 2 & 3 closed
	Cache type select interface burst	JP7	Pins 1 & 2 closed
	Cache type select linear burst	JP7	Pins 2 & 3 closed

SIMM CONFIGURATION
Size	Bank 0
8MB	(2) 1M x 36
16MB	(2) 2M x 36
32MB	(2) 4M x 36
64MB	(2) 8M x 36
128MB	(2) 16M x 36
256MB	(2) 32M x 36
Note: Board accepts EDO memory.

DIMM CONFIGURATION
Size	Bank 1	Bank 2
8MB	(1) 1M x 64	None
16MB	(1) 2M x 64	None
16MB	(1) 1M x 64	(1) 1M x 64
24MB	(1) 2M x 64	(1) 1M x 64
32MB	(1) 4M x 64	None
32MB	(1) 2M x 64	(1) 2M x 64
40MB	(1) 4M x 64	(1) 1M x 64
48MB	(1) 4M x 64	(1) 2M x 64
64MB	(1) 8M x 64	None
64MB	(1) 4M x 64	(1) 4M x 64
72MB	(1) 8M x 64	(1) 1M x 64
80MB	(1) 8M x 64	(1) 2M x 64
96MB	(1) 8M x 64	(1) 4M x 64
128MB	(1) 8M x 64	(1) 8M x 64
Note: Board accepts SDRAM memory.

DIMM VOLTAGE CONFIGURATION
Voltage	JP6
3.3v	Pins 5 & 6, 7 & 8 closed
5v	Pins 1 & 2, 3 & 4 closed

CACHE CONFIGURATION
Size	Bank 0
512KB	(2) 64K x 32

CPU SPEED SELECTION (CX 6X86)
CPU speed	Clock speed	Multiplier	JP8	JP9	JP10	JP11
120MHz	50MHz	2x	2 & 3	2 & 3	2 & 3	2 & 3
150MHz	60MHz	2x	2 & 3	1 & 2	1 & 2	2 & 3
166MHz	66MHz	2x	1 & 2	1 & 2	1 & 2	2 & 3
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (CX 6X86, CON’T)
CPU speed	Clock speed	Multiplier	JP12	JP13	JP14
120MHz	50MHz	2x	1 & 2	1 & 2	Open
150MHz	60MHz	2x	1 & 2	1 & 2	Open
166MHz	66MHz	2x	1 & 2	1 & 2	Open
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (CX 6X86L)
CPU speed	Clock speed	Multiplier	JP8	JP9	JP10	JP11
150MHz	60MHz	2x	2 & 3	1 & 2	1 & 2	2 & 3
166MHz	66MHz	2x	1 & 2	1 & 2	1 & 2	2 & 3
200MHz	75MHz	2x	1 & 2	2 & 3	1 & 2	2 & 3
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (CX 6X86L, CON’T)
CPU speed	Clock speed	Multiplier	JP12	JP13	JP14
150MHz	60MHz	2x	1 & 2	1 & 2	1 & 2, 3 & 4, 5 & 6
166MHz	66MHz	2x	1 & 2	1 & 2	1 & 2, 3 & 4, 5 & 6
200MHz	75MHz	2x	1 & 2	1 & 2	1 & 2, 3 & 4, 5 & 6
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (CX 6X86MX)
CPU speed	Clock speed	Multiplier	JP8	JP9	JP10	JP11
166MHz	66MHz	2x	1 & 2	1 & 2	1 & 2	2 & 3
200MHz	75MHz	2x	1 & 2	2 & 3	1 & 2	2 & 3
233MHz	75MHz	2.5x	1 & 2	2 & 3	1 & 2	2 & 3
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (CX 6X86MX, CON’T)
CPU speed	Clock speed	Multiplier	JP12	JP13	JP14
166MHz	66MHz	2x	1 & 2	1 & 2	1 & 2, 3 & 4, 5 & 6
200MHz	75MHz	2x	1 & 2	1 & 2	1 & 2, 3 & 4, 5 & 6
233MHz	75MHz	2.5x	2 & 3	1 & 2	1 & 2, 3 & 4, 5 & 6
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (CX M II)
CPU speed	Clock speed	Multiplier	JP8	JP9	JP10	JP11
300MHz	66MHz	3.5x	1 & 2	1 & 2	1 & 2	1 & 2
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (CX M II, CON’T)
CPU speed	Clock speed	Multiplier	JP12	JP13	JP14
300MHz	66MHz	3.5x	1 & 2	1 & 2	1 & 2, 3 & 4, 5 & 6
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (AM K5)
CPU speed	Clock speed	Multiplier	JP8	JP9	JP10	JP11
75MHz	50MHz	1.5x	2 & 3	2 & 3	2 & 3	1 & 2
90MHz	60MHz	1.5x	2 & 3	1 & 2	1 & 2	1 & 2
100MHz	66MHz	1.5x	1 & 2	1 & 2	1 & 2	1 & 2
120MHz	60MHz	1.5x	2 & 3	1 & 2	1 & 2	1 & 2
133MHz	66MHz	2x	1 & 2	1 & 2	1 & 2	1 & 2
166MHz	66MHz	2.5x	1 & 2	1 & 2	1 & 2	2 & 3
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (AM K5, CON’T)
CPU speed	Clock speed	Multiplier	JP12	JP13	JP14
75MHz	50MHz	1.5x	1 & 2	1 & 2	Open
90MHz	60MHz	1.5x	1 & 2	1 & 2	Open
100MHz	66MHz	1.5x	1 & 2	1 & 2	Open
120MHz	60MHz	2x	1 & 2	1 & 2	Open
133MHz	66MHz	2x	1 & 2	1 & 2	Open
166MHz	66MHz	2.5x	2 & 3	1 & 2	Open
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (AM K6)
CPU speed	Clock speed	Multiplier	JP8	JP9	JP10	JP11
166MHz	66MHz	2.5x	1 & 2	1 & 2	1 & 2	2 & 3
200MHz	66MHz	3x	1 & 2	1 & 2	1 & 2	1 & 2
233MHz	66MHz	3.5x	1 & 2	1 & 2	1 & 2	1 & 2
266MHz	66MHz	4x	1 & 2	1 & 2	1 & 2	2 & 3
300MHz	66MHz	4.5x	1 & 2	1 & 2	1 & 2	2 & 3
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (AM K6, CON’T)
CPU speed	Clock speed	Multiplier	JP12	JP13	JP14
166MHz	66MHz	2.5x	2 & 3	1 & 2	1 & 2, 3 & 4, 5 & 6
200MHz	66MHz	3x	2 & 3	1 & 2	1 & 2, 3 & 4, 5 & 6
233MHz	66MHz	3.5x	1 & 2	1 & 2	1 & 2, 3 & 4, 5 & 6
266MHz	66MHz	4x	1 & 2	2 & 3	1 & 2, 3 & 4, 5 & 6
300MHz	66MHz	4.5x	2 & 3	2 & 3	1 & 2, 3 & 4, 5 & 6
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (AM K6-2)
CPU speed	Clock speed	Multiplier	JP8	JP9	JP10	JP11
266MHz	66MHz	4x	1 & 2	1 & 2	1 & 2	2 & 3
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (AM K6-2, CON’T)
CPU speed	Clock speed	Multiplier	JP12	JP13	JP14
266MHz	66MHz	4x	1 & 2	2 & 3	1 & 2, 3 & 4, 5 & 6
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (INTEL)
CPU speed	Clock speed	Multiplier	JP8	JP9	JP10	JP11
75MHz	50MHz	1.5x	2 & 3	2 & 3	2 & 3	1 & 2
90MHz	60MHz	1.5x	2 & 3	1 & 2	1 & 2	1 & 2
100MHz	66MHz	1.5x	2 & 3	1 & 2	1 & 2	1 & 2
120MHz	60MHz	2x	2 & 3	1 & 2	1 & 2	2 & 3
133MHz	66MHz	2x	1 & 2	1 & 2	1 & 2	2 & 3
150MHz	60MHz	2.5x	2 & 3	1 & 2	1 & 2	2 & 3
166MHz	66MHz	2.5x	1 & 2	1 & 2	1 & 2	2 & 3
180MHz	60MHz	3x	2 & 3	1 & 2	1 & 2	1 & 2
200MHz	66MHz	3x	1 & 2	1 & 2	1 & 2	1 & 2
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (INTEL, CON’T)
CPU speed	Clock speed	Multiplier	JP12	JP13	JP14
75MHz	50MHz	1.5x	1 & 2	1 & 2	Open
90MHz	60MHz	1.5x	1 & 2	1 & 2	Open
100MHz	66MHz	1.5x	1 & 2	1 & 2	Open
120MHz	60MHz	2x	1 & 2	1 & 2	Open
133MHz	66MHz	2x	1 & 2	1 & 2	Open
150MHz	60MHz	2.5x	2 & 3	1 & 2	Open
166MHz	66MHz	2.5x	2 & 3	1 & 2	Open
180MHz	60MHz	3x	2 & 3	1 & 2	Open
200MHz	66MHz	3x	2 & 3	1 & 2	Open
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (INTEL MMX)
CPU speed	Clock speed	Multiplier	JP8	JP9	JP10	JP11
166MHz	66MHz	2.5x	1 & 2	1 & 2	1 & 2	2 & 3
200MHz	66MHz	3x	1 & 2	1 & 2	1 & 2	1 & 2
233MHz	66MHz	3.5x	1 & 2	1 & 2	1 & 2	1 & 2
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (INTEL MMX, CON’T)
CPU speed	Clock speed	Multiplier	JP12	JP13	JP14
166MHz	66MHz	2.5x	2 & 3	1 & 2	1 & 2, 3 & 4, 5 & 6
200MHz	66MHz	3x	2 & 3	1 & 2	1 & 2, 3 & 4, 5 & 6
233MHz	66MHz	3.5x	1 & 2	1 & 2	1 & 2, 3 & 4, 5 & 6
Note: Pins designated should be in the closed position.

CPU VOLTAGE SELECTION
Voltage	JP5
2.8v	Pins 7 & 8 closed
2.9v	Pins 1 & 2, 7 & 8 closed
3.2v	Pins 5 & 6, 7 & 8 closed
3.3v	Pins 1 & 2, 5 & 6, 7 & 8 closed
3.5v	Pins 1 & 2, 3 & 4, 5 & 6, 7 & 8 closed