AP-60IFV Motherboard Settings and Configuration

Device Type	Mainboard
Processor	Pentium Pro
Processor Speed	150/166/180/200MHz
Chip Set	Intel
Video Chip Set	Chips & Technologies
Maximum Onboard Memory	512MB (EDO supported)
Maximum Video Memory	2MB
Cache	256KB (located on Pentium Pro CPU)
BIOS	AMI/Award
Dimensions	Unidentified
I/O Options	Floppy drive interface, green PC connector, IDE interfaces (2), parallel port, PS/2 mouse port, serial ports (2), VGA port, IR connector, USB connectors (2), flat panel connectors (2)
NPU Options	None

CONNECTIONS
Purpose	Location	Purpose	Location
Flat panel connector	C1	IDE interface 1	CN9
Flat panel connector	C2	IDE interface 2	CN10
VGA port	CN1	IDE interface LED	J1
PS/2 mouse port	CN2	Power LED & keylock	J2
Serial port 1	CN3	Turbo LED	J3
Serial port 2	CN4	Speaker	J4
Floppy drive interface	CN5	Reset switch	J5
Parallel port	CN6	Green PC connector	JP4
USB connector 1	CN7	IR connector	IR1
USB connector 2	CN8	Auxiliary keyboard connector	KCN1

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	VEE voltage select +12v - +35v	JP5	Pins 2 & 3 closed
	VEE voltage select -12v - -34v	JP5	Pins 1 & 2 closed
»	Contrast voltage enabled	JP6	Pins 1 & 2 closed
	VEE voltage enabled	JP6	Pins 2 & 3 closed
»	Factory configured - do not alter	JP12	Open
»	Factory configured - do not alter	JP13	Pins 2 & 3, 5 & 6, 8 & 9 closed
»	Factory configured - do not alter	JP14	Pins 1 & 2, 3 & 4, 5 & 6, 7 & 8, 9 & 10, 11 & 12 closed
»	PS/2 mouse IRQ12 enabled	JP15	Closed
	PS/2 mouse IRQ12 disabled	JP15	Open
»	Flash BIOS voltage select 5v	JP20	Pins 2 & 3 closed
	Flash BIOS voltage select 12v	JP20	Pins 1 & 2 closed
»	Factory configured - do not alter	RN1	Unidentified
»	Factory configured - do not alter	RN2	Unidentified
»	Factory configured - do not alter	RN3	Unidentified
»	Factory configured - do not alter	RN4	Unidentified
»	Factory configured - do not alter	VR1	Unidentified
»	Factory configured - do not alter	VR1	Unidentified

SIMM CONFIGURATION
Size	Bank 0	Bank 1
8MB	(2) 1M x 36	None
16MB	(2) 2M x 36	None
16MB	(2) 1M x 36	(2) 1M x 36
24MB	(2) 2M x 36	(2) 1M x 36
32MB	(2) 4M x 36	None
32MB	(2) 2M x 36	(2) 2M x 36
40MB	(2) 4M x 36	(2) 1M x 36
48MB	(2) 4M x 36	(2) 2M x 36
64MB	(2) 8M x 36	None
64MB	(2) 4M x 36	(2) 4M x 36
72MB	(2) 8M x 36	(2) 1M x 36
80MB	(2) 8M x 36	(2) 2M x 36
96MB	(2) 8M x 36	(2) 4M x 36
128MB	(2) 8M x 36	(2) 8M x 36
128MB	(2) 16M x 36	None
136MB	(2) 16M x 36	(2) 1M x 36
144MB	(2) 16M x 36	(2) 2M x 36
160MB	(2) 16M x 36	(2) 4M x 36
192MB	(2) 16M x 36	(2) 8M x 36
256MB	(2) 32M x 36	None
256MB	(2) 16M x 36	(2) 16M x 36
264MB	(2) 32M x 36	(2) 1M x 36
272MB	(2) 32M x 36	(2) 2M x 36
288MB	(2) 32M x 36	(2) 4M x 36
320MB	(2) 32M x 36	(2) 8M x 36
384MB	(2) 32M x 36	(2) 16M x 36
512MB	(2) 32M x 36	(2) 32M x 36
Note: Board accepts EDO memory.

CACHE CONFIGURATION

Note: 256KB cache is located on the Pentium Pro CPU.

VIDEO MEMORY CONFIGURATION

Note: Board accepts 1MB/2MB video memory. The location is unidentified.

CPU SPEED SELECTION
CPU speed	Clock speed	Multiplier	JP7	JP8	JP16	JP18
150MHz	60MHz	2.5x	Open	Closed	1 & 2, 3 & 4, 5 & 6	1 & 2
166MHz	66MHz	2.5x	Closed	Open	1 & 2, 3 & 4, 5 & 6	Open
180MHz	60MHz	3x	Open	Closed	1 & 2, 3 & 4, 7 & 8	1 & 2
200MHz	66MHz	3x	Closed	Open	1 & 2, 3 & 4, 7 & 8	Open
Note: Pins designated should be in the closed position.

FLAT PANEL SELECTION
Setting		JP3
	1024 x 768 DSTN	Pins 1 & 2, 3 & 4, 5 & 6 closed
	1280 x 1024 TFT	Pins 3 & 4, 5 & 6 closed
	640 x 480 DSTN	Pins 1 & 2, 5 & 6 closed
	800 x 600 DSTN	Pins 5 & 6 closed
	640 x 480 Sharp TFT	Pins 1 & 2, 3 & 4 closed
»	640 x 480 18 bit TFT	Pins 3 & 4 closed
	1024 x 768 TFT	Pins 1 & 2 closed
	800 x 600 TFT	Open

WATCHDOG TIMER ACTIVE SELECTION
Time out		JP10
	.5 sec	Pins 2 & 3 closed
	1 sec	Pins 5 & 6 closed
	2 sec	Pins 8 & 9 closed
»	4 sec	Pins 11 & 12 closed
	8 sec	Pins 10 & 11 closed
	16 sec	Pins 7 & 8 closed
	32 sec	Pins 4 & 5 closed
	64 sec	Pins 1 & 2 closed

WATCHDOG TIMER ACTIVE SELECTION
Time out		JP11
»	Reset system	Pins 1 & 2 closed
	NMI system	Pins 2 & 3 closed
	Disabled	Open