AP-560E Motherboard Settings and Configuration

Device Type	Single board computer
Processor	CX 6X86/CX 686MX/AM K5/AM K6/Pentium/Pentium MMX
Processor Speed	75/90/100/120/133/150/166/200/233MHz
Chip Set	VIA
Video Chip Set	None
Maximum Onboard Memory	256MB
Maximum Video Memory	None
Cache	512KB
BIOS	Award
Dimensions	338mm x 122mm
I/O Options	Ethernet 10Base100 connector, floppy drive interface, IDE interfaces (2), parallel port, PS/2 mouse port, serial ports (2), IR connector, USB connector, PC/104 connectors (2)
NPU Options	None

CONNECTIONS
Purpose	Location	Purpose	Location
Chassis fan power	C1	Auxiliary keyboard connector	CN10
IDE interface 1	CN1	PC/104 connector	CN11
IDE interface 2	CN2	PC/104 connector	CN12
Floppy drive interface	CN3	IR connector	IR1
Front panel connector	CN4	Power LED & keylock	J1
Ethernet 10Base100 connector	CN5	Speaker	J2
PS/2 mouse port	CN6	IDE interface LED	J3
Serial port 1	CN7	Green PC LED	J4
Parallel port	CN8	USB connector	USB
Serial port 2	CN9

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured - do not alter	JP1	Pins 1 & 2 closed
»	Factory configured - do not alter	J5	Unidentified
»	Flat panel voltage select 5v	JP2	Pins 1 & 2 closed
	Flat panel voltage select 3.3v	JP2	Pins 2 & 3 closed
»	CMOS memory normal operation	JP5	Pins 1 & 2 closed
	CMOS memory clear	JP5	Pins 2 & 3 closed
»	Factory configured - do not alter	JP11	Pins 1 & 2 closed
»	Factory configured - do not alter	JP16	Pins 1 & 2 closed
»	Factory configured - do not alter	JP17	Unidentified

SIMM CONFIGURATION
Size	Bank 0
8MB	(2) 1M x 36
16MB	(2) 2M x 36
32MB	(2) 4M x 36
64MB	(2) 8M x 36
128MB	(2) 16M x 36
256MB	(2) 32M x 36

DIMM CONFIGURATION
Size	Bank 1	Bank 2
8MB	(1) 1M x 64	None
16MB	(1) 2M x 64	None
16MB	(1) 1M x 64	(1) 1M x 64
24MB	(1) 2M x 64	(1) 1M x 64
32MB	(1) 4M x 64	None
32MB	(1) 2M x 64	(1) 2M x 64
40MB	(1) 4M x 64	(1) 1M x 64
48MB	(1) 4M x 64	(1) 2M x 64
64MB	(1) 8M x 64	None
64MB	(1) 4M x 64	(1) 4M x 64
72MB	(1) 8M x 64	(1) 1M x 64
80MB	(1) 8M x 64	(1) 2M x 64
96MB	(1) 8M x 64	(1) 4M x 64
128MB	(1) 16M x 64	None
128MB	(1) 8M x 64	(1) 8M x 64
136MB	(1) 16M x 64	(1) 1M x 64
144MB	(1) 16M x 64	(1) 2M x 64
160MB	(1) 16M x 64	(1) 4M x 64
192MB	(1) 16M x 64	(1) 8M x 64
256MB	(1) 16M x 64	(1) 16M x 64

CACHE CONFIGURATION

Note: 512KB cache is factory installed and is not configurable. The location is unidentified.

CPU SPEED SELECTION (CX 6X86)
CPU speed	Clock speed	Multiplier	JP3	JP15
120MHz	50MHz	2x	1 & 2, 3 & 4, 5 & 6	1 & 2
150MHz	60MHz	2x	1 & 2	1 & 2
166MHz	66MHz	2x	Open	1 & 2
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (CX 6X86MX)
CPU speed	Clock speed	Multiplier	JP3	JP15
166MHz	66MHz	2x	Open	1 & 2
200MHz	66MHz	2x	Open	1 & 2
233MHz	75MHz	2x	3 & 4, 5 & 6	1 & 2
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (AM K5)
CPU speed	Clock speed	Multiplier	JP3	JP15
75MHz	50MHz	1.5x	1 & 2, 3 & 4, 5 & 6	Open
90MHz	60MHz	1.5x	1 & 2	Open
100MHz	66MHz	1.5x	Open	Open
120MHz	60MHz	2x	1 & 2	1 & 2
133MHz	66MHz	2x	Open	1 & 2
150MHz	60MHz	2.5x	1 & 2	1 & 2, 3 & 4
166MHz	66MHz	2.5x	Open	1 & 2, 3 & 4
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (AM K6)
CPU speed	Clock speed	Multiplier	JP3	JP15
166MHz	66MHz	2.5x	Open	1 & 2, 3 & 4
200MHz	66MHz	3x	Open	3 & 4
233MHz	66MHz	3.5x	Open	Open
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (INTEL)
CPU speed	Clock speed	Multiplier	JP3	JP15
75MHz	50MHz	1.5x	1 & 2, 3 & 4, 5 & 6	Open
90MHz	60MHz	1.5x	1 & 2	Open
100MHz	66MHz	1.5x	Open	Open
120MHz	60MHz	2x	1 & 2	1 & 2
133MHz	66MHz	2x	Open	1 & 2
150MHz	60MHz	2.5x	1 & 2	1 & 2, 3 & 4
166MHz	66MHz	2.5x	Open	1 & 2, 3 & 4
200MHz	66MHz	3x	Open	3 & 4
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (INTEL MMX)
CPU speed	Clock speed	Multiplier	JP3	JP15
166MHz	66MHz	2.5x	Open	1 & 2, 3 & 4
200MHz	66MHz	3x	Open	3 & 4
233MHz	66MHz	3.5x	Open	Open
Note: Pins designated should be in the closed position.

CPU TYPE SELECTION
Type		JP6
»	Single voltage	Pins 2 & 3 closed
»	Dual voltage	Pins 1 & 2 closed

CPU VOLTAGE SELECTION
Voltage		JP4
	2.0v	Open
	2.1v	Pins 1 & 2 closed
	2.2v	Pins 3 & 4 closed
	2.3v	Pins 1 & 2, 3 & 4 closed
	2.4v	Pins 5 & 6 closed
	2.5v	Pins 1 & 2, 5 & 6 closed
	2.6v	Pins 3 & 4, 5 & 6 closed
	2.7v	Pins 1 & 2, 3 & 4, 5 & 6 closed
»	2.8v	Pins 7 & 8 closed
	2.9v	Pins 1 & 2, 7 & 8 closed
	3.0v	Pins 3 & 4, 7 & 8 closed
	3.1v	Pins 1 & 2, 3 & 4, 7 & 8 closed
	3.2v	Pins 5 & 6, 7 & 8 closed
	3.3v	Pins 1 & 2, 5 & 6, 7 & 8 closed
	3.4v	Pins 3 & 4, 5 & 6, 7 & 8 closed
	3.5v	Pins 1 & 2, 3 & 4, 5 & 6, 7 & 8 closed

SERIAL PORT 2 SELECTION
Type		JP9	JP10	JP12	JP13	JP14
»	RS-232	1 & 2	1 & 2	1 & 2	1 & 2	1 & 2
	RS-422	2 & 3	2 & 3	2 & 3	2 & 3	3 & 4
	RS-485	2 & 3	2 & 3	2 & 3	2 & 3	5 & 6
Note: Pins designated should be in the closed position.

FLASH BIOS ADDRESS SELECTION
Address	JP8
D000	Pins 3 & 4, 7 & 8 closed
D400	Pins 3 & 4, 9 & 10 closed
D800	Pins 5 & 6, 7 & 8 closed
DC00	Pins 5 & 6, 9 & 10 closed

WATCH DOG TIMER SELECTION
Seconds	JP7A	JP7B	JP7C	JP7D
.5	Pins 1 & 2 closed	Open	Open	Open
1	Open	Pins 1 & 2 closed	Open	Open
2	Open	Open	Pins 1 & 2 closed	Open
4	Open	Open	Open	Pins 1 & 2 closed
8	Open	Open	Open	Pins 2 & 3 closed
16	Open	Open	Pins 2 & 3 closed	Open
32	Open	Pins 2 & 3 closed	Open	Open
64	Pins 2 & 3 closed	Open	Open	Open