J-BOND COMPUTER SYSTEMS CORPORATION
PCI400C-D
Processor | UMCU5S/UMCU5SD/SL80486SX/SL80486SX2/SL80486DX/ SL80486DX2/CX486DX2/AM486DX2/AM486DXL2/SL80486DX2/ SL80486DX2(ODP)/CX486DX4/AM486DX4/(SL)AM486DX4(WB)/ SL80486DX4/P24T/ CX5X86 |
Processor Speed | 25/33/40/50(internal)/66(internal)/75(internal)/100(internal)MHz |
Chip Set | SIS |
Video Chip Set | S3 |
Maximum Onboard Memory | 128MB |
Maximum Video Memory | Unidentified |
Cache | 128/256/512KB |
BIOS | Award |
Dimensions | 330mm x 218mm |
I/O Options | 32-bit PCI slot, Ethernet 10Base2 connector, Ethernet 10BaseT connector, floppy drive interface, game port, green PC connector, IDE interfaces (2), SCSI connector, parallel port, PS/2 mouse port, serial ports (2), VGA port, riser slot |
NPU Options | None |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
VGA port | CN1 | Speaker | J3 |
Parallel port | CN2 | Power LED & keylock | J4 |
Serial port 2 | CN3 | Reset switch | J5 |
Serial port 1 | CN4 | Green PC connector | J6 |
PS/2 mouse port | CN5 | Turbo LED | J7 |
Floppy drive interface | CN6 | Turbo switch | J8 |
Ethernet 10BaseT connector | CN7 | Green PC LED | J9 |
IDE interface 2 | CN8 | External battery | J10 |
IDE interface 1 | CN9 | Chassis fan power | J11 |
Ethernet 10Base2 connector | CN10 | Game interface | J16 |
SCSI interface | CN11 | Green PC connector (for I/O) | JP5 |
IDE interface LED | J1 | Riser slot | SL1 |
SCSI LED | J2 | 32-bit PCI slot | SL2 |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
» | CMOS memory normal operation | J10 | Pins 2 & 3 closed |
CMOS memory clear | J10 | Pins 3 & 4 closed | |
Battery type select external | J10 | Closed | |
» | Factory configured - do not alter | JC1 | Open |
» | Factory configured - do not alter | JC2 | Open |
» | Green PC select STP.CLK | JP1 | Pins 1 & 2 closed |
Green PC select SMI OUT | JP1 | Pins 2 & 3 closed | |
» | Game port enabled | JP14 | Closed |
Game port disabled | JP14 | Open | |
» | IDE interface enabled | JP15 | Pins 1 & 2 closed |
IDE interface disabled | JP15 | Pins 2 & 3 closed | |
» | Parallel port IRQ select IRQ7 | JP16 | Pins 1 & 2 closed |
Parallel port IRQ select IRQ5 | JP16 | Pins 2 & 3 closed | |
SCSI terminator power source select from system board | JP26 | Closed | |
SCSI terminator power source select from peripheral | JP26 | Open |
DRAM CONFIGURATION | ||||
Size | Bank 0 | Bank 1 | Bank 2 | Bank 3 |
1MB | (1) 256K x 36 | None | None | None |
2MB | (1) 512K x 36 | None | None | None |
2MB | (1) 256K x 36 | (1) 256K x 36 | None | None |
3MB | (1) 256K x 36 | (1) 256K x 36 | (1) 256K x 36 | None |
4MB | (1) 1M x 36 | None | None | None |
4MB | (1) 512K x 36 | (1) 256K x 36 | (1) 256K x 36 | None |
4MB | (1) 512K x 36 | (1) 512K x 36 | None | None |
4MB | (1) 256K x 36 | (1) 256K x 36 | (1) 256K x 36 | (1) 256K x 36 |
DRAM CONFIGURATION (CON’T) | ||||
Size | Bank 0 | Bank 1 | Bank 2 | Bank 3 |
5MB | (1) 1M x 36 | (1) 256K x 36 | None | None |
5MB | (1) 256K x 36 | (1) 512K x 36 | (1) 512K x 36 | None |
5MB | (1) 256K x 36 | (1) 1M x 36 | None | None |
6MB | (1) 1M x 36 | (1) 256K x 36 | (1) 256K x 36 | None |
7MB | (1) 1M x 36 | (1) 256K x 36 | (1) 256K x 36 | (1) 256K x 36 |
8MB | (1) 1M x 36 | (1) 512K x 36 | (1) 512K x 36 | None |
8MB | (1) 1M x 36 | (1) 1M x 36 | None | None |
9MB | (1) 256K x 36 | (1) 1M x 36 | (1) 1M x 36 | None |
9MB | (1) 256K x 36 | (1) 2M x 36 | None | None |
10MB | (1) 2M x 36 | (1) 512K x 36 | None | None |
11MB | (1) 2M x 36 | (1) 256K x 36 | (1) 256K x 36 | (1) 256K x 36 |
12MB | (1) 2M x 36 | (1) 512K x 36 | (1) 512K x 36 | None |
13MB | (1) 256K x 36 | (1) 1M x 36 | (1) 1M x 36 | (1) 1M x 36 |
14MB | (1) 2M x 36 | (1) 512K x 36 | (1) 512K x 36 | (1) 512K x 36 |
14MB | (1) 512K x 36 | (1) 1M x 36 | (1) 1M x 36 | (1) 1M x 36 |
16MB | (1) 4M x 36 | None | None | None |
16MB | (1) 1M x 36 | (1) 1M x 36 | (1) 1M x 36 | (1) 1M x 36 |
17MB | (1) 4M x 36 | (1) 256K x 36 | None | None |
18MB | (1) 4M x 36 | (1) 256K x 36 | (1) 256K x 36 | None |
20MB | (1) 4M x 36 | (1) 1M x 36 | None | None |
28MB | (1) 4M x 36 | (1) 1M x 36 | (1) 1M x 36 | (1) 1M x 36 |
32MB | (1) 8M x 36 | None | None | None |
32MB | (1) 4M x 36 | (1) 4M x 36 | None | None |
33MB | (1) 256K x 36 | (1) 8M x 36 | None | None |
34MB | (1) 8M x 36 | (1) 256K x 36 | (1) 256K x 36 | None |
34MB | (1) 8M x 36 | (1) 512K x 36 | None | None |
36MB | (1) 8M x 36 | (1) 512K x 36 | (1) 512K x 36 | None |
40MB | (1) 4M x 36 | (1) 2M x 36 | (1) 2M x 36 | (1) 2M x 36 |
44MB | (1) 8M x 36 | (1) 1M x 36 | (1) 1M x 36 | (1) 1M x 36 |
48MB | (1) 8M x 36 | (1) 2M x 36 | (1) 2M x 36 | None |
64MB | (1) 8M x 36 | (1) 8M x 36 | None | None |
72MB | (1) 2M x 36 | (1) 8M x 36 | (1) 8M x 36 | None |
80MB | (1) 8M x 36 | (1) 4M x 36 | (1) 4M x 36 | (1) 4M x 36 |
80MB | (1) 4M x 36 | (1) 8M x 36 | (1) 8M x 36 | None |
96MB | (1) 8M x 36 | (1) 8M x 36 | (1) 8M x 36 | None |
97MB | (1) 256K x 36 | (1) 8M x 36 | (1) 8M x 36 | (1) 8M x 36 |
98MB | (1) 512K x 36 | (1) 8M x 36 | (1) 8M x 36 | (1) 8M x 36 |
100MB | (1) 1M x 36 | (1) 8M x 36 | (1) 8M x 36 | (1) 8M x 36 |
104MB | (1) 2M x 36 | (1) 8M x 36 | (1) 8M x 36 | (1) 8M x 36 |
112MB | (1) 4M x 36 | (1) 8M x 36 | (1) 8M x 36 | (1) 8M x 36 |
128MB | (1) 8M x 36 | (1) 8M x 36 | (1) 8M x 36 | (1) 8M x 36 |
128MB | (1) 16M x 36 | (1) 16M x 36 | None | None |
Note: The location of the banks are unidentified. Any SIMM can be installed in any slot. |
CACHE CONFIGURATION | |||
Size | Bank 0 | Bank 1 | TAG |
128KB | (4) 32K x 8 | None | (1) 8K x 8 |
256KB (A) | (4) 32K x 8 | (4) 32K x 8 | (1) 16K x 8 |
256KB (B) | (4) 64K x 8 | None | (1) 16K x 8 |
512KB (A) | (4) 128K x 8 | None | (1) 32K x 8 |
512KB (B) | (4) 64K x 8 | (4) 64K x 8 | (1) 32K x 8 |
CACHE JUMPER CONFIGURATION | |||||
Size | JP6 | JP7 | JP8 | JP9 | JP10 |
128KB | 1 & 2 | 1 & 2 | 1 & 2 | 1 & 2 | 1 & 2, 3 & 4 |
256KB (A) | 1 & 2 | 2 & 3 | 2 & 3 | 1 & 2 | 2 & 3, 4 & 5 |
256KB (B) | 1 & 2 | 2 & 3 | 1 & 2 | 2 & 3 | 1 & 2, 3 & 4 |
512KB (A) | 2 & 3 | 2 & 3 | 1 & 2 | 1 & 2 | 1 & 2, 3 & 4 |
512KB (B) | 2 & 3 | 2 & 3 | 2 & 3 | 1 & 2 | 2 & 3, 4 & 5 |
Note: Pins designated should be in the closed position. |
CPU SPEED SELECTION | |||
Speed | JP2 | JP3 | JP4 |
25MHz | Open | Open | Open |
33MHz | Open | Closed | Closed |
40MHz | Open | Closed | Open |
50iMHz | Open | Open | Open |
66iMHz | Open | Closed | Closed |
75iMHz | Open | Open | Open |
100iMHz | Open | Closed | Closed |
CPU TYPE SELECTION | |||||
Type | JC3 | JC4 | JC5 | JC6 | JC7 |
UMC U5S (5v) | Open | 1 & 2 | 2 & 3 | Open | Open |
UMC U5SD (5v) | Open | 1 & 2 | 2 & 3 | Open | Open |
SL80486SX (5v) | Open | 1 & 2 | 2 & 3 | Open | Open |
SL80486SX2 (5v) | Open | 1 & 2 | 2 & 3 | Open | Open |
SL80486DX (5v) | Open | 1 & 2 | 2 & 3 | Open | Open |
CX486DX2 (5v) | Open | 1 & 2 | 2 & 3 | 2 & 3 | Open |
AM486DX2 | Open | Open | 2 & 3 | Open | Open |
AM486DXL2 (3.3v) | Open | 1 & 2 | 2 & 3 | Open | 2 & 3 |
SL80486DX2 (5v) | Open | 1 & 2 | 2 & 3 | Open | Open |
SL80486DX2(ODP) | Open | 1 & 2 | 2 & 3 | Open | Open |
CX486DX4 (3.3v) | Open | 1 & 2 | 2 & 3 | 2 & 3 | Open |
AM486DX4 (3v) | Open | Open | 2 & 3 | Open | Open |
(SL)AM486DX4(WB) | Open | 1 & 2 | 2 & 3 | 1 & 2 | Open |
SL80486DX4 | Open | 1 & 2 | 2 & 3 | Open | Open |
SL80486DX4(3v) | Open | 1 & 2 | 2 & 3 | Open | Open |
P24T | 1 & 2 | 1 & 2 | 2 & 3 | Open | Open |
CX5X86 (3v) | Open | 1 & 2 | 2 & 3 | 1 & 2 | Open |
Note: Pins designated should be in the closed position. |
CPU TYPE SELECTION (CON’T) | ||||
Type | JC8 | JC9 | JC10 | JC11 |
UMC U5S (5v) | Open | Open | 3 & 4 | 2 & 3 |
UMC U5SD (5v) | Open | Open | 3 & 4 | 3 & 4 |
SL80486SX (5v) | Open | 3 & 4 | Open | 2 & 3 |
SL80486SX2 (5v) | Open | 3 & 4 | Open | 2 & 3 |
SL80486DX (5v) | Open | 3 & 4 | Open | 1 & 2, 3 & 4 |
CX486DX2 (5v) | Open | 2 & 3 | 2 & 3 | 1 & 2, 3 & 4 |
AM486DX2 | Open | Open | Open | 1 & 2, 3 & 4 |
AM486DXL2 (3.3v) | Open | Open | 3 & 4 | 1 & 2, 3 & 4 |
SL80486DX2 (5v) | Open | 3 & 4 | Open | 1 & 2, 3 & 4 |
SL80486DX2(ODP) | Open | 3 & 4 | Open | 1 & 2, 3 & 4 |
CX486DX4 (3.3v) | Open | 2 & 3 | 2 & 3 | 1 & 2, 3 & 4 |
AM486DX4 (3v) | Open | Open | Open | 1 & 2, 3 & 4 |
(SL)AM486DX4(WB) | Open | 1 & 2, 3 & 4 | Open | 1 & 2, 3 & 4 |
SL80486DX4 | Open | 3 & 4 | Open | 1 & 2, 3 & 4 |
SL80486DX4(3v) | Open | 3 & 4 | Open | 1 & 2, 3 & 4 |
P24T | Open | 3 & 4 | Open | 1 & 2, 3 & 4 |
CX5X86 (3v) | Open | 1 & 2, 3 & 4 | Open | 1 & 2, 3 & 4 |
Note: Pins designated should be in the closed position. |
CPU TYPE SELECTION (CON’T) | ||||
Type | JC12 | JC13 | JC14 | JC15 |
UMC U5S (5v) | 1 & 2 | Open | Open | Open |
UMC U5SD (5v) | 1 & 2 | Open | Open | Open |
SL80486SX (5v) | 3 & 4 | Open | 2 & 3 | 4 & 5 |
SL80486SX2 (5v) | 3 & 4 | Open | 2 & 3 | 4 & 5 |
SL80486DX (5v) | 3 & 4 | Open | 2 & 3 | 4 & 5 |
CX486DX2 (5v) | 3 & 4 | Open | 1 & 2 | 2 & 3 |
AM486DX2 | 3 & 4 | Open | Open | Open |
AM486DXL2 (3.3v) | 1 & 2, 3 & 4 | Open | 4 & 5 | Open |
SL80486DX2 (5v) | 3 & 4 | Open | 2 & 3 | 4 & 5 |
SL80486DX2(ODP) | 3 & 4 | Open | 2 & 3 | 4 & 5 |
CX486DX4 (3.3v) | 3 & 4 | Open | 1 & 2 | 2 & 3 |
AM486DX4 (3v) | 3 & 4 | Open | Open | Open |
(SL)AM486DX4(WB) | 3 & 4 | Open | 2 & 3 | 4 & 5 |
SL80486DX4 | 2 & 3 | 4 & 5 | 2 & 3 | 1 & 2 |
SL80486DX4(3v) | 3 & 4 | Open | 2 & 3 | 4 & 5 |
P24T | 2 & 3 | Open | 2 & 3 | 1 & 2 |
CX5X86 (3v) | 3 & 4 | 2 & 3 | 2 & 3 | 2 & 3 |
Note: Pins designated should be in the closed position. |
CPU VOLTAGE SELECTION | |
Voltage | JP33 |
3.3v | Open |
5v | Pins 1 & 2, 3 & 4, 5 & 6 closed |
DMA CHANNEL SELECTION | |||
Channel | JP20 | JP21 | |
1 | Pins 1 & 2 closed | Pins 1 & 2 closed | |
» | 3 | Pins 2 & 3 closed | Pins 2 & 3 closed |
PARALLEL PORT ADDRESS SELECTION | |||||
Setting | JP17 | JP18 | JP19 | JP31 | |
» | EPP mode | Open | Pins 2 & 3 closed | Pins 1 & 2 closed | Pins 1 & 2 closed |
LPT1 (378h) | Any setting | Pins 2 & 3 closed | Pins 2 & 3 closed | Pins 1 & 2 closed | |
ECP/EPP | Open | Pins 1 & 2 closed | Pins 2 & 3 closed | Pins 1 & 2 closed | |
EXT, 2 FDD | Open | Pins 1 & 2 closed | Pins 1 & 2 closed | Pins 1 & 2 closed |
SERIAL PORT 1 ADDRESS SELECTION | ||
Setting | JP22 | JP25 |
COM1 (3F8h) | Pins 1 & 2 closed | Pins 2 & 3 closed |
COM3 (3E8h) | Pins 2 & 3 closed | Pins 1 & 2 closed |
COM4 (2E8h) | Pins 1 & 2 closed | Pins 1 & 2 closed |
Disabled | Pins 2 & 3 closed | Pins 2 & 3 closed |
SERIAL PORT 2 ADDRESS SELECTION | ||
Setting | JP23 | JP24 |
COM2 (2F8h) | Pins 1 & 2 closed | Pins 2 & 3 closed |
COM3 (3E8h) | Pins 1 & 2 closed | Pins 1 & 2 closed |
COM4 (2E8h) | Pins 2 & 3 closed | Pins 1 & 2 closed |
Disabled | Pins 2 & 3 closed | Pins 2 & 3 closed |
SCSI/LAN INTERRUPT SELECTION | |||
Setting | JP27 | JP28 | JP29 |
On board LAN INT C | 2 & 3 | 1 & 2 | Any setting |
On board LAN INT B | 2 & 3 | 2 & 3 | Any setting |
On board SCSI INT C | 2 & 3 | 1 & 2 | Any setting |
On board SCSI INT B | 2 & 3 | 2 & 3 | Any setting |
Both LAN/SCSI used (LAN INT C, SCSI INT B) | 2 & 3 | 2 & 3 | 2 & 3 |
Both LAN/SCSI used (LAN INT B, SCSI INT C) | 2 & 3 | 1 & 2 | 1 & 2 |
No LAN/SCSI | 1 & 2 | Any setting | Any setting |
Note: Pins designated should be in the closed position. |