IPC DYNASTY LE/IPC HOMEMAGIC (MB486LE#51) Motherboard Settings and Configuration

Processor	80486SX/ODP486SX/80487SX/ODP486DX/80486DX/80486DX2/Pentium Overdrive
Processor Speed	25/33/50(internal)/66(internal)MHz
Chip Set	UMC
Max. Onboard DRAM	32MB
Cache	64/128/256KB
BIOS	AMI
Dimensions	330mm x 218mm
I/O Options	Floppy drive interface, IDE interface, parallel port, serial ports (2), riser slot
NPU Options	4167 (location unidentified)

CONNECTIONS
Purpose	Location	Purpose	Location
Serial port 2	J1	Turbo LED	J10
Serial port 1	J2	Reset switch	J11
Parallel port	J3	IDE interface LED	JP20
IDE interface	J5	Power on connector	JP45
Floppy drive interface	J7	Turbo switch	JP46
External battery	J8	Riser Card	SL1
Speaker	J9

USER CONFIGURABLE SETTINGS
Function		Jumper	Position
»	IDE interface enabled	JP5	Closed
	IDE interface disabled	JP5	Open
»	Floppy drive interface enabled	JP6	pins 2 & 3 closed
	Floppy drive interface disabled	JP6	pins 1 & 2 closed
»	Floppy drive pre comp mode select normal	JP21	Open
	Floppy drive pre comp mode select alternate	JP21	Closed
»	Floppy drive type select single speed spindle	JP22	Open
	Floppy drive type select dual speed spindle	JP22	Closed
»	Monitor type select color	JP23	Closed
	Monitor type select monochrome	JP23	Open
»	Battery type select internal	JP24	Closed
	Battery type select external	JP24	Open
»	Power good signal detect from board	JP25	pins 1 & 2 closed
	Power good signal detect from power supply	JP25	pins 2 & 3 closed
»	Factory configured - do not alter	JP27	N/A
»	Factory configured - do not alter	JP33	Open
»	Weitek not installed	JP35	pins 1 & 2 closed
	Weitek installed	JP35	pins 2 & 3 closed
»	Factory configured - do not alter	JP47	Open

DRAM CONFIGURATION
Size	Bank 0	Bank 1
4MB	(4) 1M x 9	NONE
8MB	(4) 1M x 9	(4) 1M x 9
16MB	(4) 4M x 9	NONE
32MB	(4) 4M x 9	(4) 4M x 9

CACHE CONFIGURATION
Size	Bank 0	Bank 1	TAG
64KB	(4) 8K x 8	(4) 8K x 8	(1) 8K x 8
128KB	(4) 32K x 8	NONE	(1) 8K x 8
256KB	(4) 32K x 8	(4) 32K x 8	(1) 32K x 8

CACHE JUMPER CONFIGURATION
Size	JP36	JP37	JP39	JP40	JP41	JP42	JP43	JP44
64KB	1 & 2	1 & 2	Open	1 & 2	Open	Open	Open	Open
128KB	2 & 3	1 & 2	1 & 2	2 & 3	Closed	Closed	Open	Open
256KB	2 & 3	2 & 3	2 & 3	1 & 2	Closed	Closed	Closed	Closed
Note: Pins designated should be in the closed position.

CPU TYPE CONFIGURATION
Type	JP26	JP28	JP30	JP31	JP32
80486SX (PQFP)	1 & 2	Open	1 & 2	Open	1 & 2, 3 & 4
80486SX (PGA)	2 & 3	Open	Open	Open	2 & 3
ODP486SX	1 & 2	Open	1 & 2	Open	1 & 2, 3 & 4
80487SX	1 & 2	Open	1 & 2	Open	1 & 2, 3 & 4
ODP486DX	2 & 3	Open	2 & 3	Open	1 & 2, 3 & 4
80486DX (PQFP)	1 & 2	Closed	1 & 2	Closed	Open
80486DX (PGA)	2 & 3	Open	2 & 3	Open	1 & 2, 3 & 4
80486DX2	2 & 3	Open	2 & 3	Open	1 & 2, 3 & 4
Pentium Overdrive	1 & 2	Open	1 & 2	Open	1 & 2, 3 & 4
Note: Pins designated should be in the closed position.

PARALLEL PORT CONFIGURATION
Setting		JP1	JP4	JP29
»	LPT2	pins 1 & 2 closed	pins 1 & 2 closed	pins 2 & 3 closed
»	LPT1	pins 1 & 2 closed	pins 2 & 3 closed	pins 2 & 3 closed
»	LPT3	pins 2 & 3 closed	pins 1 & 2 closed	pins 1 & 2 closed
»	Disabled	pins 2 & 3 closed	pins 2 & 3 closed	Open

SERIAL PORT CONFIGURATION
Setting	JP2	JP3	JP7
COM1 & COM2 enabled	pins 1 & 2 closed	pins 1 & 2 closed	pins 1 & 2 closed
COM1 disabled & COM2 enabled	pins 2 & 3 closed	pins 1 & 2 closed	pins 1 & 2 closed
COM1 enabled & COM2 disabled	pins 1 & 2 closed	pins 2 & 3 closed	pins 1 & 2 closed
COM1 & COM2 disabled	pins 2 & 3 closed	pins 2 & 3 closed	pins 2 & 3 closed