IPC DYNASTY LE (MB386LE&A) Motherboard Settings and Configuration
IPC CORPORATION, LTD.
IPC DYNASTY LE (MB386LE&A)
Processor | 80386SX |
Processor Speed | 33MHz |
Chip Set | Headland |
Max. Onboard DRAM | 16MB |
Cache | None |
BIOS | AMI |
Dimensions | 330mm x 218mm |
I/O Options | Floppy drive interface, IDE interface, parallel port, serial ports (2), VGA feature connector, VGA port, riser slot |
NPU Options | 80387SX |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
Serial port 2 | J1 | VGA feature connector | J7 |
Serial port 1 | J2 | Speaker | J9 |
Parallel port | J3 | IDE interface LED | JP1 |
VGA port | J4 | Reset switch | JP15 |
IDE interface | J5 | Power on LED | JP21 |
Floppy drive interface | J6 | Riser slot | SL1 |
USER CONFIGURABLE SETTINGS | |||
Function | Jumper | Position | |
» | IDE interface enabled | JP4 | Closed |
IDE interface disabled | JP4 | Open | |
» | On board video enabled | JP6 | Pins 1 & 2 closed |
On board video disabled | JP6 | Pins 2 & 3 closed | |
» | VGA 0 wait state enabled | JP7 | Closed |
VGA 0 wait state disabled | JP7 | Open | |
» | Floppy drive pre comp select normal comp | JP8 | Open |
Floppy drive pre comp select alternate comp | JP8 | Closed | |
» | Floppy drive interface enabled | JP9 | Pins 2 & 3 closed |
Floppy drive interface disabled | JP9 | Pins 1 & 2 closed | |
» | Floppy drive spindle speed select single speed | JP10 | Open |
Floppy drive spindle speed select dual speed | JP10 | Closed | |
» | CMOS memory normal operation | JP11 | Open |
CMOS memory clear | JP11 | Closed | |
» | Monitor type select color/EGA/VGA | JP14 | Closed |
Monitor type select monochrome | JP14 | Open | |
DRAM CONFIGURATION | ||
Size | Bank 0 | Bank 1 |
1MB | (4) 256K x 9 | None |
2MB | (4) 256K x 9 | (4) 256K x 9 |
4MB | (4) 1M x 9 | None |
5MB | (4) 256K x 9 | (4) 1M x 9 |
8MB | (4) 1M x 9 | (4) 1M x 9 |
16MB | (4) 4M x 9 | None |
Note: The orientation of Banks 0 & 1 are unidentified. | ||
PARALLEL PORT CONFIGURATION | ||||
LPT | JP3 | JP23 | JP25 | |
Disabled | Open | Pins 2 & 3 closed | Pins 2 & 3 closed | |
LPT1 | Pins 2 & 3 closed | Pins 1 & 2 closed | Pins 2 & 3 closed | |
| » | LPT2 | Pins 2 & 3 closed | Pins 1 & 2 closed | Pins 1 & 2 closed |
LPT3 | Pins 1 & 2 closed | Pins 2 & 3 closed | Pins 1 & 2 closed | |
SERIAL PORT CONFIGURATION | |||||
COM1 | COM2 | JP22 | JP24 | JP26 | |
Disabled | Disabled | Pins 2 & 3 closed | Pins 2 & 3 closed | Pins 2 & 3 closed | |
| » | Enabled | Enabled | Pins 1 & 2 closed | Pins 1 & 2 closed | Pins 1 & 2 closed |
Enabled | Disabled | Pins 2 & 3 closed | Pins 1 & 2 closed | Pins 1 & 2 closed | |
Disabled | Enabled | Pins 1 & 2 closed | Pins 2 & 3 closed | Pins 1 & 2 closed | |
VGA MEMORY CONFIGURATION | |||
Read/write | JP16 | JP17 | |
| » | memr/memw | Pins 1 & 2 closed | Pins 1 & 2 closed |
Smemr/Smemw | Pins 2 & 3 closed | Pins 2 & 3 closed | |
My Books
