TEAMSERVER FI Motherboard Settings and Configuration

Processor	Pentium
Processor Speed	75/100MHz
Chip Set	Unidentified
Video Chip Set	None
Maximum Onboard Memory	256MB
Maximum Video Memory	None
Cache	256/512KB
BIOS	Unidentified
Dimensions	355mm x 304mm
I/O Options	32-bit PCI slots (3), floppy drive interface, IDE interface, parallel port, VGA port, PS/2 mouse port, backplane connector, riser board, cache slot
NPU Options	None

CONNECTIONS
Purpose	Location	Purpose	Location
Riser board	CN1	Front panel connector	CN5
IDE interface (not used)	CN2	Speaker/reset switch	J30
Backplane connector	CN3	32-bit PCI slots	PC1 - PC3
Floppy drive interface	CN4	Cache slot	SL1
Note: Parallel port, VGA port and mouse port are located on the riser board.

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured - do not alter	J1	Unidentified
»	Factory configured - do not alter	J2	Unidentified
»	Factory configured - do not alter	J1A	Pins 1 & 2 closed
»	CMOS memory normal operation	J1B	Pins 1 & 2 closed
	CMOS memory clear	J1B	Pins 2 & 3 closed
»	Password normal operation	J2B	Pins 1 & 2 closed
	Password clear	J2B	Pins 2 & 3 closed
»	CPU socket 1 set as primary socket	J3B	Pins 1 & 2 closed
	CPU socket 2 set as primary socket	J3B	Pins 2 & 3 closed
»	Monitor type select color	J4A	Pins 1 & 2 closed
	Monitor type select monochrome	J4A	Pins 2 & 3 closed
»	Factory configured - do not alter (disable & ground)	J4B	Pins 1 & 2 closed
»	Factory configured - do not alter (enable & kickstart)	J4B	Pins 2 & 3 closed
»	Flash BIOS write protect enabled	J5A	Pins 1 & 2 closed
	Flash BIOS write protect disabled	J5A	Pins 2 & 3 closed
»	Flash BIOS access to system configuration utility enabled	J6A	Pins 1 & 2 closed
	Flash BIOS access to system configuration utility disabled	J6A	Pins 2 & 3 closed
»	Flash BIOS normal operation	J7A	Pins 1 & 2 closed
	Flash BIOS recovery mode	J7A	Pins 2 & 3 closed
»	Factory configured - do not alter	J7B	Pins 1 & 2 closed

DRAM CONFIGURATION
Size	Bank 0	Bank 1	Bank 2	Bank 3
16MB	(2) 2M x 36	None	None	None
32MB	(2) 2M x 36	(2) 2M x 36	None	None
32MB	(2) 4M x 36	None	None	None
48MB	(2) 2M x 36	(2) 2M x 36	(2) 2M x 36	None
48MB	(2) 4M x 36	(2) 2M x 36	None	None
64MB	(2) 2M x 36	(2) 2M x 36	(2) 2M x 36	(2) 2M x 36
64MB	(2) 4M x 36	(2) 4M x 36	None	None
64MB	(2) 8M x 36	None	None	None
64MB	(2) 4M x 36	(2) 2M x 36	(2) 2M x 36	None
80MB	(2) 4M x 36	(2) 2M x 36	(2) 2M x 36	(2) 2M x 36
80MB	(2) 8M x 36	(2) 2M x 36	None	None

DRAM CONFIGURATION (CON’T)
Size	Bank 0	Bank 1	Bank 2	Bank 3
96MB	(2) 4M x 36	(2) 4M x 36	(2) 4M x 36	None
96MB	(2) 8M x 36	(2) 2M x 36	(2) 2M x 36	None
96MB	(2) 8M x 36	(2) 4M x 36	None	None
112MB	(2) 8M x 36	(2) 2M x 36	(2) 2M x 36	(2) 2M x 36
128MB	(2) 4M x 36	(2) 4M x 36	(2) 4M x 36	(2) 4M x 36
128MB	(2) 8M x 36	(2) 8M x 36	None	None
128MB	(2) 8M x 36	(2) 4M x 36	(2) 4M x 36	None
160MB	(2) 8M x 36	(2) 4M x 36	(2) 4M x 36	(2) 4M x 36
192MB	(2) 8M x 36	(2) 8M x 36	(2) 8M x 36	None
256MB	(2) 8M x 36	(2) 8M x 36	(2) 8M x 36	(2) 8M x 36
Note: The location of banks 0, 1, 2 & 3 are unidentified.

CACHE CONFIGURATION
Size	SL1
256KB	256KB module installed
512KB	512KB module installed

CPU SPEED SELECTION
Speed	J5B	J6B
50MHz	Pins 1 & 2 closed	Pins 2 & 3 closed
60MHz	Pins 1 & 2 closed	Pins 1 & 2 closed
66MHz	Pins 2 & 3 closed	Pins 2 & 3 closed

CPU TYPE SELECTION
Type	J2A
P54C	Pins 1 & 2 closed
P54CS	Pins 2 & 3 closed

CPU VOLTAGE SELECTION
Voltage	J3A
Standard or VR	Pins 1 & 2 closed
VRE	Pins 2 & 3 closed