IBM CORPORATION
APTIVA M30 (250-0441), APTIVA M31 (250-0441), APTIVA M40 (12-10609), APTIVA M41 (250-0442), APTIVA M50 (250-0440), APTIVA M53 (250-0443), APTIVA M71 (250-0444)
Processor | CX M1/Pentium |
Processor Speed | 75/100/133MHz |
Chip Set | VLSI |
Video Chip Set | Trident |
Maximum Onboard Memory | 128MB (EDO supported) |
Maximum Video Memory | 2MB |
Cache | 256/512KB |
BIOS | Unidentified |
Dimensions | 330mm x 218mm |
I/O Options | Floppy drive interface, IDE interfaces (2), parallel port, PS/2 mouse port, serial ports (2), VESA feature connector, VGA port, riser slot, cache slots (2), internal VGA connector, power switch connector, wake up on ring connector |
NPU Options | None |

CONNECTIONS | |||
Purpose | Location | Purpose | Location |
PS/2 mouse port | CN2 | Internal VGA connector | J11 |
Serial port 2 | CN3 | Power switch connector | J16 |
Serial port 1 | CN4 | IDE interface LED | J17 |
Parallel port | CN5 | VESA feature connector | J18 |
VGA port | CN6 | Speaker | JP1 |
Floppy drive interface | CN7 | Chassis fan power | JP2 |
IDE interface 2 | CN8 | Riser slot | SL1 |
IDE interface 1 | CN9 | Cache slots | SL2 & SL3 |
Wake up on ring connector | J1 | ||
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
» | Factory configured - do not alter | JP2 | Unidentified |
» | CMOS memory normal operation | JP12 | Pins 1 & 2 closed |
CMOS memory clear | JP12 | Pins 2 & 3 closed | |
Floppy drive write enabled | JP22 | Pins 1 & 2 closed | |
Floppy drive write disabled | JP22 | Pins 2 & 3 closed | |
DRAM CONFIGURATION | ||
Size | Bank 0 | Bank 1 |
8MB | (2) 1M x 36 | None |
16MB | (2) 2M x 36 | None |
16MB | (2) 1M x 36 | (2) 1M x 36 |
24MB | (2) 1M x 36 | (2) 2M x 36 |
32MB | (2) 4M x 36 | None |
32MB | (2) 2M x 36 | (2) 2M x 36 |
40MB | (2) 1M x 36 | (2) 4M x 36 |
48MB | (2) 4M x 36 | (2) 2M x 36 |
64MB | (2) 8M x 36 | None |
64MB | (2) 4M x 36 | (2) 4M x 36 |
72MB | (2) 1M x 36 | (2) 8M x 36 |
80MB | (2) 8M x 36 | (2) 2M x 36 |
96MB | (2) 4M x 36 | (2) 8M x 36 |
128MB | (2) 8M x 36 | (2) 8M x 36 |
Note: Board accepts EDO memory. Board also accepts x 32 SIMMs. Banks are interchangeable. | ||
CACHE CONFIGURATION | |||
Size | SL2 | SL3 | TAG |
256KB | 256KB module installed | Not installed | (1) 32K x 8 |
512KB | 256KB module installed | 256KB module installed | (1) 32K x 8 |
Note: The location of the TAG is unidentified. | |||
CACHE JUMPER CONFIGURATION | |
Size | JP6 |
None | Pins 1 & 3, 2 & 4 closed |
256KB | Pins 1 & 3, 2 & 4 closed |
512KB | Pins 3 & 5, 4 & 6 closed |
VIDEO MEMORY CONFIGURATION | ||
Size | Bank 0 | Bank 1 |
1MB | 1MB | None |
2MB | 1MB | 1MB |
Note: The location of bank 0 is unidentified. The size of the memory chips are unidentified. | ||
CPU SPEED SELECTION | ||
CPU | Speed | JP23 |
CX M1 | 3/1 | Pins 4 & 6 closed |
CX M1 | 2/1 | Pins 2 & 4 closed |
P54 | 3/2 | Open |
P54 | 2/1 | Pins 2 & 4 closed |
P54C | - | Pins 1 & 3 closed |
P55C | - | Pins 3 & 5 closed |
ASM M1 | - | Open |
CPU MULTIPLIER SELECTION | |
Multiplier | JP25 |
2x | Pins 1 & 2 closed |
2.5x | Pins 2 & 3 closed |
CPU TYPE SELECTION | |
Type | JP9 |
CX M1 | Pins 2 & 3 closed |
P54C | Pins 1 & 2 closed |
P55C | N/A |
CPU VOLTAGE SELECTION | |
Voltage | JP21 |
3.3v | Pins 2 & 3 closed |
5v | Pins 1 & 2 closed |