GESSBS-40 Motherboard Settings and Configuration

GESPAC

GESSBS-40

Device Type
Mainboard
Processor
68040
Processor Speed
33MHz
Chip Set
Unidentified
Video Chip Set
None
Maximum Onboard Memory
None
Maximum Video Memory
None
Cache
Unidentified
BIOS
Unidentified
Dimensions
160mm x 100mm
I/O Options
Serial ports (2), G-96 bus interface, I/O interface connector, XSB local expansion submodule buses (2)
NPU Options
None

CONNECTIONS
Purpose
Location
Purpose
Location
Multi processor module
C1
Serial port 1
P4
G-96 bus interface
P1
XSB local expansion submodule bus
P5
I/O interface connector
P2
XSB local expansion submodule bus
P6
Serial port 2
P3
Reset/abort switch
P7

USER CONFIGURABLE SETTINGS
Function
Label
Position

EPROM size select 64K x 16 or 128K x 16
J1
Pins 1 & 2 closed

EPROM size select 256K x 16
J1
Pins 2 & 3 closed

RTC battery disabled
J2
Pins 1 & 4 closed

RTC battery enabled
J2
Pins 2 & 3 closed

Cache enabled
J4/pins 1 & 4
Open

Cache disabled
J4/pins 1 & 4
Closed

PNMU enabled
J4/pins 2 & 3
Open

PNMU disabled
J4/pins 2 & 3
Closed

Base address select for dual ported RAM < 32MB
J5
Pins 1 & 2 closed

Base address select for dual ported RAM > 32MB
J5
Pins 2 & 3 closed

SYSCLK speed select CPU = SYSCLK
J6
Pins 1 & 2 closed

SYSCLK speed select CPU = SYSCLK/2
J6
Pins 2 & 3 closed

External cache access enabled
J7
Open

External cache access disabled
J7
Closed

Enable & SYSCLK and BGRT driven
J8
Pins 2 & 3 closed

Enable & SYSCLK and BGRT not driven
J8
Open
»
Factory configured - do not alter
P8
Unidentified

DUAL PORTED RAM-BASE ADDRESS SELECTION
Address
J9
A21
Pins 11 & 12 closed
A22
Pins 10 & 13 closed
A23
Pins 9 & 14 closed
A24
Pins 8 & 15 closed
A25
Pins 7 & 16 closed
A26
Pins 6 & 17 closed
A27
Pins 5 & 18 closed
A28
Pins 4 & 19 closed
A29
Pins 3 & 20 closed
A30
Pins 2 & 21 closed
A31
Pins 1 & 22 closed

STANDBY BATTERY POWER SELECTION
Setting
J3
From P1-29b (+Vbatt bus line)
Pin 1
To MAX696 power supply supervisor chip
Pin 2
From local battery
Pin 3
Note: Location of LEDs is unidentified.

DIAGNOSTIC LED(S)
LED
Color
Status
Condition
LED1
Red
On
Processor is in supervisor mode
LED2
Orange
On
Processor attempting to access and external module & it has not yet the owner of the G-6432 bus module
LED3
Yellow
On
GESSBS-40 is retrying an aborted cycle
LED4
Green
On
Processor is halted or during a reset operation

Headaches Begone! A Systemic Approach To Healing Your Headaches

Don't Let Your Bike Seat Ruin Your Sex Life Book

GESSBS-40 Motherboard Settings and Configuration

Search

My Books

Discover

Device Type	Mainboard
Processor	68040
Processor Speed	33MHz
Chip Set	Unidentified
Video Chip Set	None
Maximum Onboard Memory	None
Maximum Video Memory	None
Cache	Unidentified
BIOS	Unidentified
Dimensions	160mm x 100mm
I/O Options	Serial ports (2), G-96 bus interface, I/O interface connector, XSB local expansion submodule buses (2)
NPU Options	None

CONNECTIONS
Purpose	Location	Purpose	Location
Multi processor module	C1	Serial port 1	P4
G-96 bus interface	P1	XSB local expansion submodule bus	P5
I/O interface connector	P2	XSB local expansion submodule bus	P6
Serial port 2	P3	Reset/abort switch	P7

USER CONFIGURABLE SETTINGS
Function		Label	Position
	EPROM size select 64K x 16 or 128K x 16	J1	Pins 1 & 2 closed
	EPROM size select 256K x 16	J1	Pins 2 & 3 closed
	RTC battery disabled	J2	Pins 1 & 4 closed
	RTC battery enabled	J2	Pins 2 & 3 closed
	Cache enabled	J4/pins 1 & 4	Open
	Cache disabled	J4/pins 1 & 4	Closed
	PNMU enabled	J4/pins 2 & 3	Open
	PNMU disabled	J4/pins 2 & 3	Closed
	Base address select for dual ported RAM < 32MB	J5	Pins 1 & 2 closed
	Base address select for dual ported RAM > 32MB	J5	Pins 2 & 3 closed
	SYSCLK speed select CPU = SYSCLK	J6	Pins 1 & 2 closed
	SYSCLK speed select CPU = SYSCLK/2	J6	Pins 2 & 3 closed
	External cache access enabled	J7	Open
	External cache access disabled	J7	Closed
	Enable & SYSCLK and BGRT driven	J8	Pins 2 & 3 closed
	Enable & SYSCLK and BGRT not driven	J8	Open
»	Factory configured - do not alter	P8	Unidentified

DUAL PORTED RAM-BASE ADDRESS SELECTION
Address	J9
A21	Pins 11 & 12 closed
A22	Pins 10 & 13 closed
A23	Pins 9 & 14 closed
A24	Pins 8 & 15 closed
A25	Pins 7 & 16 closed
A26	Pins 6 & 17 closed
A27	Pins 5 & 18 closed
A28	Pins 4 & 19 closed
A29	Pins 3 & 20 closed
A30	Pins 2 & 21 closed
A31	Pins 1 & 22 closed

STANDBY BATTERY POWER SELECTION
Setting	J3
From P1-29b (+Vbatt bus line)	Pin 1
To MAX696 power supply supervisor chip	Pin 2
From local battery	Pin 3
Note: Location of LEDs is unidentified.

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Red	On	Processor is in supervisor mode
LED2	Orange	On	Processor attempting to access and external module & it has not yet the owner of the G-6432 bus module
LED3	Yellow	On	GESSBS-40 is retrying an aborted cycle
LED4	Green	On	Processor is halted or during a reset operation