FIRST INTERNATIONAL COMPUTER, INC.
486-JAL REV. C
Processor | 80486SX/80486DX/80486DX2 |
Processor Speed | 25/33/50(internal)/66(internal)MHz |
Chip Set | VIA |
Max. Onboard DRAM | 32MB |
Cache | 64/128/256KB |
BIOS | AMI |
Dimensions | 330mm x 218mm |
I/O Options | PS/2 mouse port, parallel port, serial ports (2), VGA port, VGA feature connector, floppy drive interface, IDE interface, riser card |
NPU Options | None |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
PS/2 mouse port | CN2 | VGA feature connector | J13 |
Serial port 1 | CN3 | Turbo switch | J19 |
Serial port 2 | CN4 | Turbo LED | J20 |
Parallel port | CN5 | Reset switch | J21 |
VGA port | CN6 | Speaker | J22 |
Floppy drive interface | CN8 | Power LED & keylock | J23 |
IDE interface | CN9 | IDE interface LED | J45 |
External battery | J9 | Riser Card | SL1 |
USER CONFIGURABLE SETTINGS | |||
Function | Jumper | Position | |
» | Monitor type select monochrome/EGA/VGA | J4 | Open |
Monitor type select color | J4 | Closed | |
» | CMOS memory normal operation | J5 | Open |
CMOS memory clear | J5 | Closed | |
» | Password normal operation | J7 | Open |
Password reset | J7 | pins 2 & 3 closed | |
» | Battery type select internal | J8 | pins 2 & 3 closed |
Battery type select external | J8 | pins 1 & 2 closed | |
» | On board VGA enabled | J10 | pins 1 & 2 closed |
On board VGA disabled | J10 | pins 2 & 3 closed | |
» | Factory configured - do not alter | J11 | N/A |
» | IDE interface enabled | J24 | pins 1 & 2 closed |
IDE interface disabled | J24 | pins 2 & 3 closed | |
» | Factory configured - do not alter | JC5 | N/A |
DRAM CONFIGURATION 1 | ||
Size | Bank 0 | Bank 1 |
1MB | (1) 256K x 36 | NONE |
2MB | (1) 256K x 36 | (1) 256K x 36 |
4MB | (1) 1M x 36 | NONE |
5MB | (1) 1M x 36 | (1) 256K x 36 |
8MB | (1) 1M x 36 | (1) 1M x 36 |
16MB | (1) 4M x 36 | NONE |
17MB | (1) 4M x 36 | (1) 256K x 36 |
20MB | (1) 4M x 36 | (1) 1M x 36 |
32MB | (1) 4M x 36 | (1) 4M x 36 |
DRAM CONFIGURATION 2 | ||
Size | Bank 0A | Bank 1 |
4MB | 4MB | NONE |
5MB | 4MB | (1) 256K x 36 |
8MB | 4MB | (1) 1M x 36 |
20MB | 4MB | (1) 4M x 36 |
Note: Bank 0A is factory installed and is not configurable. Use either this table or the above table. |
CACHE CONFIGURATION | ||
Size | Bank 0 | Bank 1 |
64KB | (4) 8K x 8 | (4) 8K x 8 |
128KB | (4) 32K x 8 | NONE |
256KB | (4) 32K x 8 | (4) 32K x 8 |
CPU TYPE CONFIGURATION | ||||
Type | JC1 | JC2 | JC3 | JC4 |
80486SX | pins 2 & 3 closed | pins 2 & 3 closed | Open | Open |
80486DX | pins 1 & 2 closed | pins 1 & 2 closed | Closed | Closed |
80486DX2 | pins 1 & 2 closed | pins 1 & 2 closed | Closed | Closed |
CPU SPEED CONFIGURATION | |
Speed | JK1 |
25MHz | pins 5 & 6 closed |
33MHz | pins 1 & 2 closed |
50iMHz | pins 5 & 6 closed |
66iMHz | pins 1 & 2 closed |
HARD DRIVE SPEED CONFIGURATION | ||
Speed | J16 | J17 |
0 | pins 2 & 3 closed | pins 2 & 3 closed |
1 | pins 1 & 2 closed | pins 2 & 3 closed |
2 | pins 1 & 2 closed | pins 1 & 2 closed |
BUS SPEED CONFIGURATION | |
CPU speed | J18 |
<= 33MHz | pins 1 & 2 closed |
> 33MHz | pins 2 & 3 closed |
FLOPPY DRIVE CONFIGURATION | ||
Type | JF1 | JF2 |
1.44MB | pins 2 & 3 closed | pins 2 & 3 closed |
2.88MB | pins 1 & 2 closed | pins 1 & 2 closed |
VRAM CONFIGURATION | ||
Size | Bank 0 | Bank 1 |
512KB | 512KB | NONE |
1MB | 512KB | 512KB |
2MB | 1MB | 1MB |
Note: The size of the VRAM chips are unidentified. |