TEMPO LX (NOTEBOOK) Motherboard Settings and Configuration

Processor	80386SX
Processor Speed	16/20/25MHZ
Chip Set	C & T
Max. Onboard DRAM	5MB
Cache	None
BIOS	Phoenix
Dimensions	355mm x 304mm
I/O Options	Floppy drive interface, IDE interface, modem card, parallel port, serial port, VGA port
NPU Options	80387SX

CONNECTIONS
Purpose	Location	Purpose	Location
IDE interface	CN1 & CN2	Modem (COM2)	CN10
Floppy drive interface	CN3	Power switch	CN11
Keyboard connector	CN4 & CN5	Contrast dial	D1
LCD display	CN6	Brightness dial	D2
Parallel port	CN7	Reset switch	R1
Serial port (COM1)	CN8	Circuit breaker reset switch	R2
VGA port	CN9

USER CONFIGURABLE SETTINGS
Function		Jumper	Position
»	Factory configured - do not alter	J1	N/A
»	Factory configured - do not alter	J2	N/A
»	Factory configured - do not alter	J3	N/A
»	Factory configured - do not alter	J4	N/A
»	Factory configured - do not alter	J5	N/A

DRAM CONFIGURATION
SIze	Bank 0	Bank 1	Bank 2
1MB	1MB	1MB	1MB
3MB	NONE	2MB ZIP Module	2MB ZIP Module
5MB	NONE	NONE	2MB ZIP Module
Note:1MB DRAM is soldered to the system board, 2MB ZIP modules can be installed the additional memory will be detected via the system BIOS.

CONNECTIONS
Purpose	Location	Purpose	Location
Speaker	CN1	RJ11	CN2

MODEM CONFIGURATION
Function	SW1/switch 1	SW1/switch 3	SW1/switch 4
MNP enabled	On	On	On
MNP disabled	Off	On	On
Normal	On	On	On
Self test	On	Off	On
Relay test	On	On	Off
Note:Switch #2 is factory configured and should not be altered.