TS54P AIO (V1.4) Motherboard Settings and Configuration
ELITEGROUP COMPUTER SYSTEMS, INC.
TS54P AIO (V1.4)
Device Type | Mainboard |
Processor | Pentium/CX 6X86 |
Processor Speed | 75/90/100/120/133/150/166MHz |
Chip Set | Intel |
Maximum Onboard Memory | 128MB |
Cache | 256/512KB |
BIOS | Phoenix |
Dimensions | 330mm x 218mm |
I/O Options | 32-bit PCI slots (4), floppy drive interface, green PC connector, IDE interfaces (2), parallel port, serial ports (2), VRM connector, PS/2 mouse port, PS/2 keyboard port |
NPU Options | None |
CONNECTIONS | |||
Function | Label | Function | Label |
PS/2 mouse port | J3 | Power LED & keylock | J11 pins 11 - 15 |
Floppy drive interface | J4 | Speaker | J11 pins 17 - 20 |
IDE interface 2 | J5 | Unidentified | J12 |
Serial port 1 | J6 | Fan connector | J20 |
Serial port 2 | J7 | PS/2 mouse connector | J21 |
Parallel port | J8 | IDE interface LED | JP2 |
IDE interface 1 | J9 | External battery | jp16 |
VRM connector | J10 | 32-bit PCI slots | PC1 - PC4 |
Turbo LED | J11 pins 2 & 3 | +5V power connection | PS1 |
Green PC connector | J11 pins 4 & 5 | +3.3V power connection | PS2 |
Reset switch | J11 pins 9 & 10 |
|
|
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
Normal COM2/4 | J12 | Pins 5 & 6, 7 & 8 closed | |
IR function connector | J12 | Open | |
Onboard Multi-I/O enabled | JP7 | Pins 1 & 2 closed | |
Onboard Multi-I/O disabled | JP7 | Pins 2 & 3 closed | |
? | CMOS memory normal operation | JP15 | Open |
CMOS memory clear | JP15 | Closed | |
Cache type select write back | JP25 | Pins 1 & 2 closed | |
Cache type select write through | JP25 | Pins 2 & 3 closed | |
PCI clock select PCICLK/4 | JP26 | Pins 2 & 3 closed | |
PCI clock select PCICLK/3 | JP26 | Pins 1 & 2 closed | |
DRAM | ||
Size | Bank 0 | Bank 1 |
8MB | (2) 512K x 36 | (2) 512K x 36 |
8MB | (2) 1M x 36 | None |
12MB | (2) 1M x 36 | (2) 512K x 36 |
16MB | (2) 2M x 36 | None |
16MB | (2) 1M x 36 | (2) 1M x 36 |
20MB | (2) 2M x 36 | (2) 512K x 36 |
24MB | (2) 2M x 36 | (2) 1M x 36 |
32MB | (2) 4M x 36 | None |
32MB | (2) 2M x 36 | (2) 2M x 36 |
36MB | (2) 4M x 36 | (2) 512K x 36 |
40MB | (2) 4M x 36 | (2) 1M x 36 |
48MB | (2) 4M x 36 | (2) 2M x 36 |
64MB | (2) 8M x 36 | None |
64MB | (2) 4M x 36 | (2) 4M x 36 |
68MB | (2) 8M x 36 | (2) 512K x 36 |
72MB | (2) 8M x 36 | (2) 1M x 36 |
80MB | (2) 8M x 36 | (2) 2M x 36 |
96MB | (2) 8M x 36 | (2) 4M x 36 |
128MB | (2) 16M x 36 | None |
128MB | (2) 8M x 36 | (2) 8M x 36 |
Note: Banks 0/1 are interchangeable. | ||
CACHE SIZE | |||
Size | Bank 0 | U17 & U18 | TAG |
256KB (A) | None | (2) 32K x 32 | (1) 8K x 8 |
256KB (B) | None | (2) 32K x 32 | (1) 32K x 8 |
256KB (C) | (8) 32K x 8 | None | (1) 8K x 8 |
256KB (D) | (8) 32K x 8 | None | (1) 32K x 8 |
512KB | (8) 64K x 8 | None | (1) 32K x 8 |
CACHE JUMPER | |||||
Size | JP20 | JP21 | JP22 | JP23 | JP24 |
256KB (A & B) | 1 & 2 | 1 & 2 | 1 & 2 | 2 & 3 | 1 & 2 |
256KB (C & D) | 1 & 2 | 1 & 2 | 2 & 3 | 2 & 3 | 1 & 2 |
512KB | 2 & 3 | 1 & 2 | 2 & 3 | 1 & 2 | 2 & 3 |
Note: Pins designated should be in the closed position. | |||||
CACHE VOLTAGE | |
Setting | JP1 |
Mixed | Pins 2 & 3 closed |
3.3v | Pins 1 & 2 closed |
CPU SPEED (INTEL) | ||||
Setting | Clock Speed | Multiplier | J10 | JP4 |
75MHz | 50MHz | 1.5x | 4 & 5, 6 & 7, 19 & 20, 21 & 22 | Open |
90MHz | 60MHz | 1.5x | 4 & 5, 6 & 7, 19 & 20, 21 & 22 | 3 & 4 |
100MHz | 66MHz | 1.5x | 4 & 5, 6 & 7, 19 & 20, 21 & 22 | 1 & 2, 3 & 4 |
120MHz | 60MHz | 2x | 4 & 5, 6 & 7, 19 & 20, 21 & 22 | 3 & 4 |
133MHz | 66MHz | 2x | 4 & 5, 6 & 7, 19 & 20, 21 & 22 | 1 & 2, 3 & 4 |
150MHz | 60MHz | 2.5x | 4 & 5, 6 & 7, 19 & 20, 21 & 22 | 3 & 4 |
166MHz | 66MHz | 2.5x | 4 & 5, 6 & 7, 19 & 20, 21 & 22 | 1 & 2, 3 & 4 |
Note : Numbers designate pins that should be closed. | ||||
CPU SPEED (INTEL CON'T) | |||||
Setting | Clock Speed | Multiplier | JP5 | JP10 | JP11 |
75MHz | 50MHz | 1.5x | Open | Open | Open |
90MHz | 60MHz | 1.5x | Open | Open | Open |
100MHz | 66MHz | 1.5x | Open | Open | Open |
120MHz | 60MHz | 2x | Closed | Open | Open |
133MHz | 66MHz | 2x | Closed | Open | Open |
150MHz | 60MHz | 2.5x | Closed | Closed | Open |
166MHz | 66MHz | 2.5x | Closed | Closed | Open |
Note : Numbers designate pins that should be closed. | |||||
CPU SPEED (CYRIX) | ||||
Setting | Clock Speed | Multiplier | J10 | JP4 |
120MHz | 50MHz | 2.5x | 4 & 5, 6 & 7, 19 & 20, 21 & 22 | Open |
133MHz | 55MHz | 2.5x | 4 & 5, 6 & 7, 19 & 20, 21 & 22 | 1 & 2 |
150MHz | 60MHz | 2.5x | 4 & 5, 6 & 7, 19 & 20, 21 & 22 | 3 & 4 |
166MHz | 66MHz | 2.5x | 4 & 5, 6 & 7, 19 & 20, 21 & 22 | 1 & 2, 3 & 4 |
Note : Numbers designate pins that should be closed. | ||||
CPU SPEED (CYRIX CON'T) | |||||
Setting | Clock Speed | Multiplier | JP5 | JP10 | JP11 |
120MHz | 50MHz | 2.5x | Open | Open | Open |
133MHz | 55MHz | 2.5x | Open | Open | Open |
150MHz | 60MHz | 2.5x | Open | Open | Open |
166MHz | 66MHz | 2.5x | Open | Open | Open |
Note : Numbers designate pins that should be closed. | |||||
CPU voltage | |||
Setting | JP6 | JP27 | JP50 |
3.3v from power supply | Open | Open | N/A |
3.3v from VRM (U25 not installed) | Pins 1 & 2, 3 & 4 closed | Pins 1 & 2, 3 & 4 closed | Pins 1 & 2, 3 & 4, 5 & 6, 7 & 8 closed |
3.3v from VRM (U25 installed) | Pins 1 & 2, 3 & 4 closed | Pins 1 & 2, 3 & 4 closed | Open |
CPU VOLTAGE | |
Setting | JP28 |
3.14v - 3.46v | Pins 1 & 2 closed |
3.3v - 3.46v | Pins 3 & 4 closed |
3.45v - 3.6v | Pins 5 & 6 closed |
DMA CHANNEL | ||
Setting | JP8 | JP9 |
DMA1 | Pins 1 & 2 closed | Pins 1 & 2 closed |
DMA3 | Pins 2 & 3 closed | Pins 2 & 3 closed |
My Books
