PAM-0070I (VER. 1.00) Motherboard Settings and Configuration

Processor	CX M1/AM K5/Pentium
Processor Speed	75/90/100/120/133/150/166/180/200MHz
Chip Set	Intel
Video Chip Set	None
Maximum Onboard Memory	128MB (EDO supported)
Maximum Video Memory	None
Cache	256/512KB
BIOS	AMI/Award
Dimensions	305mm x 210mm
I/O Options	32-bit PCI slots (4), floppy drive interface, green PC connector, IDE interfaces (2), parallel port, PS/2 mouse port, serial ports (2), cache slot, IR connectors (2), USB connectors (2), ATX power connector, remote power switch
NPU Options	None

CONNECTIONS
Purpose	Location	Purpose	Location
ATX power connector	ATX	USB connector 1	J11
Reset switch	J1	USB connector 2	J12
Green PC connector	J2	Serial port 2	J14
Green PC LED	J3	Parallel port	J15
Speaker	J4	PS/2 mouse port	J16
IDE interface LED	J5	Serial port 1	J17
Power LED & keylock	J6	IR connector (fast)	J21
IDE interface 2	J7	Remote power switch	JP4
IDE interface 1	J8	32-bit PCI slots	PC1 - PC4
Floppy drive interface	J9	Cache slot	SL1
IR connector	J10

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	CMOS memory normal operation	JP1	Open
	CMOS memory clear	JP1	Closed
	Flash BIOS voltage select 12v	JP2	Pins 1 & 2 closed
	Flash BIOS voltage select 5v	JP2	Pins 2 & 3 closed

DIMM/DRAM CONFIGURATION
Size	Bank 0	Bank 1	Bank 2
8MB	None	None	(1) 1M x 64
8MB	(2) 1M x 32	None	None
16MB	(2) 1M x 32	(2) 1M x 32	None
16MB	(2) 2M x 32	None	None
16MB	None	None	(1) 2M x 64
24MB	(2) 2M x 32	(2) 1M x 32	None
24MB	None	(2) 1M x 32	(1) 2M x 64
32MB	None	(2) 4M x 32	None
32MB	None	None	(1) 4M x 64
32MB	(2) 2M x 32	(2) 2M x 32	None
32MB	None	(2) 2M x 32	(1) 2M x 64
40MB	(2) 4M x 32	(2) 1M x 32	None
40MB	None	(2) 1M x 32	(1) 4M x 64
40MB	None	(1) 4M x 64	(1) 1M x 64
48MB	(2) 2M x 32	(2) 4M x 32	None
48MB	None	(2) 2M x 32	(1) 4M x 64
48MB	None	(2) 4M x 32	(1) 2M x 64
64MB	(2) 8M x 32	None	None
64MB	None	None	(1) 8M x 64
64MB	None	(2) 4M x 32	(1) 4M x 64
72MB	(2) 8M x 32	(2) 1M x 32	None

DIMM/DRAM CONFIGURATION (CON’T)
Size	Bank 0	Bank 1	Bank 2
72MB	None	(2) 1M x 32	(1) 8M x 64
72MB	None	(2) 8M x 32	(1) 1M x 64
80MB	(2) 8M x 32	(2) 2M x 32	None
80MB	None	(2) 8M x 32	(1) 2M x 64
80MB	None	(2) 2M x 32	(1) 8M x 64
96MB	(2) 8M x 32	(2) 4M x 32	None
96MB	None	(2) 8M x 32	(1) 4M x 64
96MB	None	(2) 4M x 32	(1) 8M x 64
128MB	(2) 4M x 32	(2) 4M x 32	None
Note: Board accepts EDO memory. Banks 0 & 1 are interchangeable.

DRAM VOLTAGE CONFIGURATION
Voltage	S7	S8
3.3v	Pins 2 & 3 closed	Pins 2 & 3 closed
5v	Pins 1 & 2 closed	Pins 1 & 2 closed

CACHE CONFIGURATION
Size	Bank 0	SL1	TAG
256KB	(2) 32K x 32	Not installed	(1) 8K/16K/32K x 8
512KB	(2) 32K x 32	256KB module installed	(1) 8K/16K/32K x 8

CPU SPEED SELECTION (CYRIX, IMISC610)
CPU speed	Clock speed	Multiplier	JP11	JP12	S1	S2	S3
120MHz	50MHz	2x	2 & 3	1 & 2	Closed	Closed	Open
133MHz	66MHz	2x	2 & 3	1 & 2	Open	Closed	Open
150MHz	60MHz	2x	2 & 3	1 & 2	Closed	Open	Open
166MHz	66MHz	2x	2 & 3	1 & 2	Open	Open	Open
200MHz	55MHz	2x	2 & 3	1 & 2	Open	Open	Closed
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (AMD, IMISC610)
CPU speed	Clock speed	Multiplier	JP11	JP12	S1	S2	S3
75MHz	50MHz	1.5x	1 & 2	1 & 2	Closed	Closed	Open
90MHz	60MHz	1.5x	1 & 2	1 & 2	Closed	Open	Open
100MHz	66MHz	1.5x	1 & 2	1 & 2	Open	Open	Open
120MHz	60MHz	1.5x	1 & 2	1 & 2	Closed	Open	Open
133MHz	66MHz	1.5x	1 & 2	1 & 2	Open	Open	Open
150MHz	60MHz	2x	2 & 3	1 & 2	Closed	Open	Open
166MHz	66MHz	2x	2 & 3	1 & 2	Open	Open	Open
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (INTEL, IMISC610)
CPU speed	Clock speed	Multiplier	JP11	JP12	S1	S2	S3
75MHz	50MHz	1.5x	1 & 2	1 & 2	Closed	Closed	Open
90MHz	60MHz	1.5x	1 & 2	1 & 2	Closed	Open	Open
100MHz	66MHz	1.5x	1 & 2	1 & 2	Open	Open	Open
120MHz	60MHz	2x	2 & 3	1 & 2	Closed	Open	Open
133MHz	66MHz	2x	2 & 3	1 & 2	Open	Open	Open
150MHz	60MHz	2.5x	2 & 3	2 & 3	Closed	Open	Open
166MHz	66MHz	2.5x	2 & 3	2 & 3	Open	Open	Open
180MHz	60MHz	3x	1 & 2	2 & 3	Closed	Open	Open
200MHz	66MHz	3x	1 & 2	2 & 3	Open	Open	Open
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (CYRIX, PLL52C61-01)
CPU speed	Clock speed	Multiplier	JP11	JP12	S1	S2	S3
120MHz	50MHz	2x	2 & 3	1 & 2	Closed	Closed	Closed
133MHz	66MHz	2x	2 & 3	1 & 2	Closed	Closed	Open
150MHz	60MHz	2x	2 & 3	1 & 2	Closed	Open	Open
166MHz	66MHz	2x	2 & 3	1 & 2	Open	Open	Open
200MHz	66MHz	2x	2 & 3	1 & 2	Open	Closed	Open
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (AMD, PLL52C61-01)
CPU speed	Clock speed	Multiplier	JP11	JP12	S1	S2	S3
75MHz	50MHz	1.5x	1 & 2	1 & 2	Closed	Closed	Closed
90MHz	60MHz	1.5x	1 & 2	1 & 2	Closed	Open	Open
100MHz	66MHz	1.5x	1 & 2	1 & 2	Open	Open	Open
120MHz	60MHz	1.5x	1 & 2	1 & 2	Closed	Open	Open
133MHz	66MHz	1.5x	1 & 2	1 & 2	Open	Open	Open
150MHz	60MHz	2x	2 & 3	1 & 2	Closed	Open	Open
166MHz	66MHz	2x	2 & 3	1 & 2	Open	Open	Open
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (INTEL, PLL52C61-01)
CPU speed	Clock speed	Multiplier	JP11	JP12	S1	S2	S3
75MHz	50MHz	1.5x	1 & 2	1 & 2	Closed	Closed	Closed
90MHz	60MHz	1.5x	1 & 2	1 & 2	Closed	Open	Open
100MHz	66MHz	1.5x	1 & 2	1 & 2	Open	Open	Open
120MHz	60MHz	2x	2 & 3	1 & 2	Closed	Open	Open
133MHz	66MHz	2x	2 & 3	1 & 2	Open	Open	Open
150MHz	60MHz	2.5x	2 & 3	2 & 3	Closed	Open	Open
166MHz	66MHz	2.5x	2 & 3	2 & 3	Open	Open	Open
180MHz	60MHz	3x	1 & 2	2 & 3	Closed	Open	Open
200MHz	66MHz	3x	1 & 2	2 & 3	Open	Open	Open
Note: Pins designated should be in the closed position.

CPU VOLTAGE SELECTION
Voltage	JP8	S4	S5	S6
3.3v (single)	Closed	Closed	Closed	Closed
3.3v (dual)	Closed	Open	Open	Open
3.5v (single)	Open	Closed	Closed	Closed