PEM-3334D Motherboard Settings and Configuration

Processor	80386DX
Processor Speed	33MHz
Chip Set	DTK
Max. Onboard DRAM	16MB (8MB on external memory card)
Cache	64KB
BIOS	AMI/DTK
Dimensions	330mm x 218mm
I/O Options	32-bit external memory card
NPU Options	80387DX/3167

CONNECTIONS
Purpose	Location	Purpose	Location
Reset switch	J1	Speaker	J4
Turbo LED	J2	Power LED & keylock	J5
Turbo switch	J3	32-bit external memory card	SL1

USER CONFIGURABLE SETTINGS
Function		Jumper/Switch	Position
»	BIOS type select 27256	J6	pins 1 & 2 closed
	BIOS type select 27512	J6	pins 2 & 3 closed
»	NPU disabled	J11	Closed
	NPU enabled	J11	Open
»	Monitor type select monochrome	SW1/4	Off
	Monitor type select color	SW1/4	On

DRAM CONFIGURATION
Size	Bank 0	Bank 1
1MB	(4) 256K x 9	NONE
2MB	(4) 256K x 9	(4) 256K x 9
4MB	(4) 1M x 9	NONE
5MB	(4) 1M x 9	(4) 256K x 9
8MB	(4) 1M x 9	(4) 1M x 9
Note: In order to use 16MB memory, install memory card at SL1.

DRAM JUMPER/SWITCH CONFIGURATION
Size	J9	J10	SW1/1	SW1/2	SW1/3
1MB	2 & 3	2 & 3	On	On	On
2MB	2 & 3	2 & 3	On	On	On
4MB	1 & 2	1 & 2	On	Off	On
5MB	2 & 3	1 & 2	Off	Off	On
8MB	1 & 2	1 & 2	On	On	Off
Note: In order to use 16MB memory, install memory card at SL1. Pins designated should be in the closed position.

DRAM JUMPER CONFIGURATION
Memory installed in Bank 2	J8
256K x 9	pins 1 & 2 closed
1M x 9	pins 2 & 3 closed
Note: Banks 2 & 3 are located on the external memory card.

DRAM JUMPER CONFIGURATION
Memory installed in Bank 3	J7
256K x 9	pins 1 & 2 closed
1M x 9	pins 2 & 3 closed
Note: Bank 3 is located on the external memory card.

CACHE CONFIGURATION

Note: 64KB cache is factory installed and is not configurable. The location is unidentified.