DIAMOND FLOWER, INC.
686IPK (REV. A+)
Processor | Pentium II |
Processor Speed | 233/266MHz |
Chip Set | Intel |
Video Chip Set | None |
Maximum Onboard Memory | 512MB (EDO supported) |
Maximum Video Memory | None |
Cache | 256/512KB (located on Pentium II CPU) |
BIOS | Award |
Dimensions | 305mm x 225mm |
I/O Options | 32-bit PCI slots (4), floppy drive interface, green PC connector, IDE interfaces (2), parallel port, PS/2 mouse port, serial ports (2), IR connector, USB connector, ATX power connector |
NPU Options | None |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
ATX power connector | ATX | IDE interface 1 | J7 |
Serial port 2 | CN1 | Power LED & keylock | J8A |
Parallel port | CN2 | Speaker | J8B |
PS/2 mouse port | CN4 | Reset switch | J8C |
Serial port 1 | CN5 | Green PC connector | J8D |
USB connector | J1 | Soft off power supply | J8E |
IR connector | J2 | Green PC LED | J8F |
Chassis fan power | J4 | IDE interface LED | J8G |
Floppy drive interface | J5 | ATX LED | J8H |
IDE interface 2 | J6 | 32-bit PCI slots | PC1 – PC4 |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
» | CMOS memory normal operation | JP1 | Pins 1 & 2 closed |
CMOS memory clear | JP1 | Pins 2 & 3 closed | |
» | Factory configured - do not alter | JP4 | Open |
» | CPU fan failure detection disabled | JP5 | Open |
CPU fan failure detection enabled | JP5 | Closed | |
» | Factory configured - do not alter | JP6 | Pins 1 & 3, 2 & 4 closed |
SIMM CONFIGURATION | ||
Size | Bank 0 | Bank 1 |
8MB | (2) 1M x 36 | None |
16MB | (2) 2M x 36 | None |
16MB | (2) 1M x 36 | (2) 1M x 36 |
24MB | (2) 2M x 36 | (2) 1M x 36 |
32MB | (2) 4M x 36 | None |
32MB | (2) 2M x 36 | (2) 2M x 36 |
40MB | (2) 4M x 36 | (2) 1M x 36 |
48MB | (2) 4M x 36 | (2) 2M x 36 |
64MB | (2) 8M x 36 | None |
64MB | (2) 4M x 36 | (2) 4M x 36 |
72MB | (2) 8M x 36 | (2) 1M x 36 |
80MB | (2) 8M x 36 | (2) 2M x 36 |
96MB | (2) 8M x 36 | (2) 4M x 36 |
128MB | (2) 8M x 36 | (2) 8M x 36 |
128MB | (2) 16M x 36 | None |
136MB | (2) 16M x 36 | (2) 1M x 36 |
144MB | (2) 16M x 36 | (2) 2M x 36 |
160MB | (2) 16M x 36 | (2) 4M x 36 |
192MB | (2) 16M x 36 | (2) 8M x 36 |
256MB | (2) 16M x 36 | (2) 16M x 36 |
SIMM CONFIGURATION (CON’T) | ||
Size | Bank 0 | Bank 1 |
256MB | (2) 32M x 36 | None |
264MB | (2) 32M x 36 | (2) 1M x 36 |
272MB | (2) 32M x 36 | (2) 2M x 36 |
288MB | (2) 32M x 36 | (2) 4M x 36 |
320MB | (2) 32M x 36 | (2) 8M x 36 |
384MB | (2) 32M x 36 | (2) 16M x 36 |
512MB | (2) 32M x 36 | (2) 32M x 36 |
Note: Board accepts EDO memory. Board also accepts x 32 SIMMs. |
CACHE CONFIGURATION |
Note: 256KB/512KB cache is located on the Pentium II CPU. |
CPU SPEED SELECTION | |||
CPU speed | Clock speed | Multiplier | JP2 |
233MHz | 66MHz | 3.5x | 5 & 6, 7 & 8 |
266MHz | 66MHz | 4x | 1 & 2, 3 & 4, 7 & 8 |
300MHz | 66MHz | 4.5x | 3 & 4, 7 & 8 |
333MHz | 66MHz | 5x | 1 & 2, 7 & 8 |
Note: Pins designated should be in the closed position. |
CPU VOLTAGE SELECTION | |
Voltage | JP8 |
VID support enabled | Open |
Note: Additional settings unidentified. |