DIAMOND FLOWER, INC.
586VPM
Processor | Pentium |
Processor Speed | 75/90/100/120/133MHz |
Chip Set | VLSI |
Video Chip Set | None |
Maximum Onboard Memory | 512MB |
Maximum Video Memory | None |
Cache | 256/512/1024KB |
BIOS | Award |
Dimensions | 330mm x 218mm |
I/O Options | 32-bit PCI slots (4), floppy drive interface, green PC connector, IDE interfaces (2), parallel port, PS/2 mouse interface, serial ports (2), cache slot, IR connector, disk active connector |
NPU Options | None |

CONNECTIONS | |||
Purpose | Location | Purpose | Location |
IDE interface 1 | CN3 | IDE interface LED | J6 |
Floppy drive interface | CN4 | Disk active connector | J7 |
Parallel port | CN5 | IR connector | J8 |
IDE interface 2 | CN6 | PS/2 mouse interface | J11 |
Serial port 2 | CN7 | Green PC LED | J12 |
Serial port 1 | CN8 | Turbo LED | J13 |
Reset switch | J2 | External battery | J15 |
Speaker | J3 | 32-bit PCI slots | PC1 - PC4 |
Turbo switch | J4 | Cache slot | SL1 |
Power LED & keylock | J5 | ||
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
» | APIC disabled (1 CPU) | J14 | Pins 1 & 2 closed |
APIC enabled | J14 | Pins 2 & 3 closed | |
» | Factory configured - do not alter | JP10 | Open |
» | Factory configured - do not alter | JP13 | Pins 1 & 2 closed |
» | Factory configured - do not alter | JP14 | Pins 1 & 2 closed |
» | Factory configured - do not alter | JP16 | Pins 1 & 2 closed |
» | Monitor type select color | JP17 | Closed |
Monitor type select monochrome | JP17 | Open | |
» | PS/2 mouse IRQ12 enabled | JP18 | Closed |
PS/2 mouse IRQ12 disabled | JP18 | Open | |
» | Factory configured - do not alter | JP21 | Closed |
» | Factory configured - do not alter | JP22 | Closed |
» | Factory configured - do not alter | JP23 | Closed |
DRAM CONFIGURATION | ||||
Size | Bank 0 | Bank 1 | Bank 2 | Bank 3 |
4MB | (2) 256K x 36 | (2) 256K x 36 | None | None |
4MB | (2) 512K x 36 | None | None | None |
6MB | (2) 256K x 36 | (2) 256K x 36 | (2) 256K x 36 | None |
8MB | (2) 256K x 36 | (2) 256K x 36 | (2) 256K x 36 | (2) 256K x 36 |
8MB | (2) 512K x 36 | (2) 512K x 36 | None | None |
8MB | (2) 1M x 36 | None | None | None |
12MB | (2) 512K x 36 | (2) 512K x 36 | (2) 512K x 36 | None |
16MB | (2) 512K x 36 | (2) 512K x 36 | (2) 512K x 36 | (2) 512K x 36 |
16MB | (2) 1M x 36 | (2) 1M x 36 | None | None |
16MB | (2) 2M x 36 | None | None | None |
24MB | (2) 1M x 36 | (2) 1M x 36 | (2) 1M x 36 | None |
32MB | (2) 1M x 36 | (2) 1M x 36 | (2) 1M x 36 | (2) 1M x 36 |
32MB | (2) 2M x 36 | (2) 2M x 36 | None | None |
DRAM CONFIGURATION (CON’T) | ||||
Size | Bank 0 | Bank 1 | Bank 2 | Bank 3 |
32MB | (2) 4M x 36 | None | None | None |
48MB | (2) 2M x 36 | (2) 2M x 36 | (2) 2M x 36 | None |
64MB | (2) 2M x 36 | (2) 2M x 36 | (2) 2M x 36 | (2) 2M x 36 |
64MB | (2) 4M x 36 | (2) 4M x 36 | None | None |
64MB | (2) 8M x 36 | None | None | None |
96MB | (2) 4M x 36 | (2) 4M x 36 | (2) 4M x 36 | None |
128MB | (2) 4M x 36 | (2) 4M x 36 | (2) 4M x 36 | (2) 4M x 36 |
128MB | (2) 8M x 36 | (2) 8M x 36 | None | None |
192MB | (2) 8M x 36 | (2) 8M x 36 | (2) 8M x 36 | None |
256MB | (2) 8M x 36 | (2) 8M x 36 | (2) 8M x 36 | (2) 8M x 36 |
512MB | (2) 16M x 36 | None | None | None |
Note: Board also accepts x 32 SIMMs. | ||||
CACHE CONFIGURATION | ||||
Size | Byte line size | SL1 | TAG (U6) | TAG (U7) |
256KB | 32 | 256KB module installed | (1) 8K x 8 | None |
512KB (A) | 32 | 512KB module installed | (1) 8K x 8 | None |
512KB (B) | 64 | 512KB module installed | (1) 8K x 8 | Installed |
1MB | 64 | 1MB module installed | (1) 8K x 8 | Installed |
Note: The size of the TAG chip is unidentified for U7. | ||||
CACHE JUMPER CONFIGURATION | |||||
Size | JP6 | JP7 | JP8 | JP19 | JP20 |
256KB | 1 & 2 | 1 & 2 | 1 & 2 | 1 & 2 | 1 & 2 |
512KB (A) | 2 & 3 | 2 & 3 | 2 & 3 | 1 & 2 | 1 & 2 |
512KB (B) | 2 & 3 | 1 & 2 | 2 & 3 | 2 & 3 | 1 & 2 |
1MB | 2 & 3 | 1 & 2 | 2 & 3 | 2 & 3 | 2 & 3 |
Note: Pins designated should be in the closed position. | |||||
CACHE TYPE CONFIGURATION | ||
Type | JP4 | JP5 |
Asynchronous | Pins 1 & 2 closed | Pins 1 & 2 closed |
Pipeline burst | Pins 2 & 3 closed | Pins 2 & 3 closed |
CPU SPEED SELECTION | |||||
CPU speed | Clock speed | Multiplier | J1 | JP11 | JP12 |
75MHz | 50MHz | 1.5x | 1 & 2 | 2 & 3 | 2 & 3 |
90MHz | 60MHz | 1.5x | 1 & 2, 5 & 6 | 2 & 3 | 2 & 3 |
100MHz | 66MHz | 1.5x | 1 & 2, 3 & 4, 5 & 6 | 2 & 3 | 2 & 3 |
120MHz | 60MHz | 2x | 1 & 2, 5 & 6 | 2 & 3 | 1 & 2 |
133MHz | 66MHz | 2x | 1 & 2, 3 & 4, 5 & 6 | 2 & 3 | 1 & 2 |
Note: Pins designated should be in the closed position. | |||||
CPU VOLTAGE SELECTION | ||
Voltage | JP3 | |
3.3v - 3.45v | Pins 2 & 3 closed | |
| » | 3.45v - 3.6v | Pins 1 & 2 closed |
DMA CHANNEL SELECTION | |||
Channel | JP26 | JP27 | |
| » | 1 | Pins 1 & 2 closed | Pins 1 & 2 closed |
3 | Pins 2 & 3 closed | Pins 2 & 3 closed | |
PCI SLOT 4 SELECTION | |||
Setting | JP24 | JP25 | |
| » | PIO OR DMA mode | Pins 1 & 2 closed | Pins 1 & 2 closed |
PIO mode | Pins 2 & 3 closed | Pins 2 & 3 closed | |