DELL COMPUTER CORPORATION
POWEREDGE 4100, 6100
Processor | Pentium Pro |
Processor Speed | 200MHz |
Chip Set | Intel |
Video Chip Set | Cirrus Logic |
Maximum Onboard Memory | 2GB (EDO supported) |
Maximum Video Memory | 1MB |
Cache | 512KB (located on Pentium Pro CPU) |
BIOS | AMI |
Dimensions | 355mm x 304mm |
I/O Options | External memory card, 32-bit PCI slots (6), floppy drive interface, IDE interface, Ultra-Wide SCSI ports (2), parallel port, PS/2 mouse port, serial ports (2), VGA feature connector, VGA port, CPU slots (2), Server Management connector |
NPU Options | None |

CONNECTIONS | |||
Purpose | Location | Purpose | Location |
Chassis fan power 4 | C1 | PS/2 mouse port | CN5 |
IDE interface LED 2 | C2 | IDE interface | CN6 |
Chassis fan power 3 | C3 | Floppy drive interface | CN7 |
I2C connector | C4 | Front panel connector | CN8 |
Chassis fan power 2 | C5 | Ultra-Wide SCSI port 2 | CN9 |
IDE interface LED 1 | C6 | Ultra-Wide SCSI port 1 | CN10 |
Chassis fan power 1 | C7 | Server Management connector | J3G1 |
Parallel port | CN1 | 32-bit PCI slots | PC1 – PC6 |
VGA port | CN2 | CPU slot 1 | SL1 |
Serial port | CN3 | CPU slot 2 | SL2 |
Serial port | CN4 | External memory card | SL3 |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
» | Flash BIOS normal operation | J1 | Pins 1 & 3 closed |
Flash BIOS recovery mode | J1 | Pins 3 & 5 closed | |
» | Factory configured - do not alter | J1 | Pins 2 & 4 closed |
» | Flash BIOS write protect disabled | J2 | Pins 3 & 5 closed |
Flash BIOS write protect enabled | J2 | Pins 1 & 3 closed | |
Floppy drive 0 enabled | J2 | Pins 2 & 4 closed | |
Floppy drive 0 disabled | J2 | Pins 4 & 6 closed | |
Floppy drive 1 enabled | J3 | Pins 1 & 3 closed | |
Floppy drive 1 disabled | J3 | Pins 3 & 5 closed | |
» | Video sleep register select 03C3H | J3 | Pins 2 & 4 closed |
Video sleep register select 46E8H | J3 | Pins 4 & 6 closed | |
» | RTC power supply enabled | J4 | Pins 1 & 3 closed |
RTC power supply disabled | J4 | Pins 3 & 5 closed | |
» | Factory configured - do not alter | J4 | Pins 2, 4, 6 open |
» | Factory configured - do not alter | J4G1 | Unidentified |
» | Factory configured - do not alter | J5E1 | Unidentified |
» | Factory configured - do not alter | J8G1 | Unidentified |
» | Factory configured - do not alter | JP1 | Unidentified |
» | CMOS memory normal operation | SW1/1 | Off |
CMOS memory clear | SW1/1 | On | |
» | Password normal operation | SW1/2 | Off |
Password clear | SW1/2 | On | |
» | Factory configured - do not alter | SW1/3 | Off |
CACHE CONFIGURATION |
Note: 512KB cache is located on the Pentium Pro CPU. |
VIDEO MEMORY CONFIGURATION |
Note: Board is factory installed with 1MB video memory and is not configurable. |

DRAM CONFIGURATION | ||||
Size | Bank 0 | Bank 1 | Bank 2 | Bank 3 |
64MB | (4) 4M x 36 | None | None | None |
128MB | (4) 8M x 36 | None | None | None |
128MB | (4) 4M x 36 | (4) 4M x 36 | None | None |
256MB | (4) 16M x 36 | None | None | None |
256MB | (4) 8M x 36 | (4) 8M x 36 | None | None |
256MB | (4) 4M x 36 | (4) 4M x 36 | (4) 4M x 36 | (4) 4M x 36 |
384MB | (4) 8M x 36 | (4) 8M x 36 | (4) 4M x 36 | (4) 4M x 36 |
512MB | (4) 32M x 36 | None | None | None |
512MB | (4) 16M x 36 | (4) 16M x 36 | None | None |
512MB | (4) 8M x 36 | (4) 8M x 36 | (4) 8M x 36 | (4) 8M x 36 |
640MB | (4) 16M x 36 | (4) 16M x 36 | (4) 4M x 36 | (4) 4M x 36 |
768MB | (4) 16M x 36 | (4) 16M x 36 | (4) 8M x 36 | (4) 8M x 36 |
1024MB | (4) 32M x 36 | (4) 32M x 36 | None | None |
DRAM CONFIGURATION (CON’T) | ||||
Size | Bank 0 | Bank 1 | Bank 2 | Bank 3 |
1024MB | (4) 16M x 36 | (4) 16M x 36 | (4) 16M x 36 | (4) 16M x 36 |
1152MB | (4) 32M x 36 | (4) 32M x 36 | (4) 4M x 36 | (4) 4M x 36 |
1280MB | (4) 32M x 36 | (4) 32M x 36 | (4) 8M x 36 | (4) 8M x 36 |
1536MB | (4) 32M x 36 | (4) 32M x 36 | (4) 16M x 36 | (4) 16M x 36 |
2048MB | (4) 32M x 36 | (4) 32M x 36 | (4) 32M x 36 | (4) 32M x 36 |

USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
CPU installed in top socket | J101 | Pins 2 & 3 closed | |
CPU not installed in top socket | J101 | Pins 1 & 2 closed | |
» | Factory configured - do not alter | J102 | Unidentified |
CPU installed in bottom socket | J106 | Pins 2 & 3 closed | |
CPU not installed in bottom socket | J106 | Pins 1 & 2 closed | |
» | Factory configured - do not alter | J107 | Unidentified |
CPU SPEED SELECTION | |||
CPU speed | Clock speed | Multiplier | J105 |
200MHz | 66MHz | 3x | Pins 1 & 2, 5 & 6, 7 & 8 closed |