COMPAQ COMPUTER CORPORATION
DESKPRO 286 (12MHz)
Processor | 80286 |
Processor Speed | 12MHz |
Chip Set | ETEQ |
Max. Onboard DRAM | 2.125MB |
Cache | None |
BIOS | Compaq |
Dimensions | 330mm x 218mm |
I/O Options | None |
NPU Options | 80287 |

CONNECTIONS | |||
Purpose | Location | Purpose | Location |
Fixed drive power | J109 | Proprietary keyboard connector | J116 |
Fixed drive/Tape backup power | J110 | Main power | J117 |
Floppy drive power | J111 | External battery | J118 |
Floppy drive power | J112 | Keylock | J119 |
Monitor power | J113 | Onboard power LED | LED1 |
Speaker | J115 |
|
|
USER CONFIGURABLE SETTINGS | ||||
Function | Jumper/Switch | Position | ||
» | Oscillator type select single package | E3 | Closed | |
| Oscillator type select dual package | E3 | Open | |
» | Memory operation generation select discrete gate | E4 | pins 1 & 2 closed | |
| Memory operation generation select CBC internal | E4 | pins 2 & 3 closed | |
» | Auto slowdown disabled in software | E5 | pins 1 & 2 closed | |
| Auto slowdown enabled in software | E5 | pins 2 & 3 closed | |
» | CPU speed select switchable at keyboard | SW1/6 | Off | |
| CPU speed select forced slow | SW1/6 | On | |
» | Factory configured - do not alter | SW1/7 | Off | |
» | Monitor type select color | SW1/8 | On | |
| Monitor type select monochrome | SW1/8 | Off | |
| Notes: Settings for E3, E4, and E5 are accomplished by cutting the conductors on the bottom of the board and re-soldering the indicated locations. WARNING: Modifying E3, E4, or E5 will void the manufacturers warranty! | |||
DRAM CONFIGURATION | ||||||
Size | Bank 0 | P-0 | Bank 1 | Bank 2 | Bank 3 | Bank 4 |
256KB | (4) 4464 | (2) 4164 | (18) 4164 | NONE | NONE | NONE |
512KB | (4) 4464 | (2) 4164 | (18) 4164 | (18) 4164 | (18) 4164 | NONE |
640KB | (4) 4464 | (2) 4164 | (18) 4164 | (18) 4164 | (18) 4164 | (18) 4164 |
640KB | (4) 4464 | (2) 4164 | (18) 41256 | NONE | NONE | NONE |
1.125MB | (4) 4464 | (2) 4164 | (18) 41256 | (18) 41256 | NONE | NONE |
1.625MB | (4) 4464 | (2) 4164 | (18) 41256 | (18) 41256 | (18) 41256 | NONE |
2.125MB | (4) 4464 | (2) 4164 | (18) 41256 | (18) 41256 | (18) 41256 | (18) 41256 |
DRAM SWITCH CONFIGURATION | |||||
Size | SW1/1 | SW1/2 | SW1/3 | SW1/4 | SW1/5 |
Disabled | N/A | On | On | N/A | N/A |
256KB | On | On | Off | Off | Off |
512KB | On | Off | On | Off | Off |
640KB | On | Off | Off | Off | Off |
640KB | Off | Off | Off | On | On |
1.125MB | Off | Off | Off | On | Off |
1.625MB | Off | Off | Off | Off | On |
2.125MB | Off | Off | Off | Off | Off |
Notes: Closing both SW1/switch 2 and SW1/switch 3, disables banks 0 & 1 and any onboard ROM. | |||||
ROM JUMPER CONFIGURATION | |||
ROM type | Size | BIOS ROM/E1 | ROM set 2/E2 |
Static | 8K x 8 | 1 & 2, 4 & 5, 7 & 8 | 1 & 2, 4 & 5, 7 & 8 |
Static | 16K x 8 | 2 & 3, 4 & 5, 7 & 8 | 2 & 3, 4 & 5, 7 & 8 |
Static | 32K x 8 | 2 & 3, 4 & 5, 7 & 8 | 2 & 3, 5 & 6, 7 & 8 |
Dynamic | 8K x 8 | 1 & 2, 4 & 5, 8 & 9 | 1 & 2, 4 & 5, 8 & 9 |
Dynamic | 16K x 8 | 2 & 3, 4 & 5, 8 & 9 | 2 & 3, 4 & 5, 8 & 9 |
Dynamic | 32K x 8 | 2 & 3, 5 & 6, 8 & 9 | 2 & 3, 5 & 6, 8 & 9 |
Notes: Settings are accomplished by cutting the conductors on the bottom of the board and re-soldering the indicated locations. Pins designated should be in the closed position. WARNING: Modifying the factory configurations will void the manufacturers warranty! | |||