HS-3000 Motherboard Settings and Configuration
BOSER TECHNOLOGY CO., LTD.
HS-3000
Device Type | Mainboard |
Processor | 80386SX |
Processor Speed | 40MHz |
Chip Set | ALI M6117 |
Video Chip Set | Chips and Technology |
Maximum Onboard Memory | 64MB |
Maximum Video Memory | 1MB |
Cache | None |
BIOS | AMI |
Dimensions | 185mm x 122mm |
I/O Options | Floppy drive interface, IDE interface, parallel port, serial ports (4), PC/104 connectors (2), VGA port, PS/2 mouse port |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
Power connector | CN1 | LCD connector | CN11 |
Parallel port | CN2 | Serial port | CN12 |
Reset switch | CN3 | Serial port | CN14 |
Power LED & keylock | CN4 | Serial port | CN15 |
Speaker | CN5 | Serial port | CN16 |
IDE interface LED | CN6 | Serial port | CN17 |
Floppy drive interface | CN7 | VGA port | CN18 |
PC/104 connector | CN8 | Auxiliary keyboard connector | CN19 |
PC/104 connector | CN9 | PS/2 mouse port | CN20 |
IDE interface | CN10 | ||
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
» | COM4 select RS-422, RS-485 | JP1 | Closed |
COM4 select RS-232 | JP1 | Open | |
» | PS/2 mouse port IRQ12 enabled | JP8 | Closed |
PS/2 mouse port IRQ12 disabled | JP8 | Open | |
» | Flash BIOS voltage select 29C010 | JP15 | Pins 1 & 2 closed |
Flash BIOS voltage select 28F010 | JP15 | Pins 2 & 3 closed | |
SIMM CONFIGURATION | ||
Size | Bank 0 | Bank 1 |
1MB | (1) 256K x 36 | None |
2MB | (1) 256K x 36 | (1) 256K x 36 |
2MB | (1) 512K x 36 | None |
3MB | (1) 512K x 36 | (1) 256K x 36 |
4MB | (1) 1M x 36 | None |
4MB | (1) 512K x 36 | (1) 512K x 36 |
8MB | (1) 1M x 36 | (1) 1M x 36 |
8MB | (1) 2M x 36 | None |
9MB | (1) 2M x 36 | (1) 256K x 36 |
10MB | (1) 2M x 36 | (1) 512K x 36 |
12MB | (1) 2M x 36 | (1) 1M x 36 |
16MB | (1) 2M x 36 | (1) 2M x 36 |
64MB | (1) 8M x 36 | (1) 8M x 36 |
VIDEO MEMORY CONFIGURATION |
Note: The location of the video memory is unidentified. |
SERIAL PORT 4 SELECTION | ||
Setting | JP12 | |
| » | Enabled | Pins 1 & 2 closed |
Enabled if address is 2EFH | Pins 3 & 4 closed | |
Disabled | Pins 5 & 6 closed | |
SERIAL PORT 4 SELECTION | ||
Setting | JP13 | |
| » | Enabled | Pins 1 & 2 closed |
Enabled if –RST4 = 0 | Pins 3 & 4 closed | |
Enabled if address is 2EFH | Pins 5 & 6 closed | |
WATCHDOG TIMER SELECTION | ||
Setting | JP9 | |
| » | System reset | Pins 1 & 2 closed |
Disabled | Open | |
NMI | Pins 2 & 3 closed | |
WATCHDOG TIMER TIME OUT SELECTION | ||
Time out | JP14 | |
1 second | Pins 5 & 6 closed | |
2 seconds | Pins 5 & 6, 7 & 8 closed | |
| » | 10 seconds | Pins 3 & 4 closed |
20 seconds | Pins 3 & 4, 7 & 8 closed | |
110 seconds | Pins 1 & 2 closed | |
220 seconds | Pins 1 & 2, 7 & 8 closed | |
DISK ADDRESS SELECTION | ||
Address | JP11 | |
D000 | Pins 1 & 2 closed | |
D800 | Pins 3 & 4 closed | |
| » | E000 | Pins 5 & 6 closed |
E800 | Pins 7 & 8 closed | |
My Books
