SP97-V (REV. 1.02) Motherboard Settings and Configuration

Processor	CX 6X86/CX 6X86/CX 686MX/IBM 6X86/IBM 6X86MX/AM K5/ AM K6/Pentium
Processor Speed	75/90/100/120/133/150/166/200/233MHz
Chip Set	SIS
Video Chip Set	SIS
Maximum Onboard Memory	256MB (EDO supported)
Maximum Video Memory	4MB
Cache	256/512KB
BIOS	Unidentified
Dimensions	254mm x 218mm
I/O Options	32-bit PCI slots (4), floppy drive interface, green PC connector, IDE interfaces (2), parallel port, PS/2 mouse interface, serial ports (2), VGA feature connector, VGA port, IR connectors (2), USB connector, ATX power connector
NPU Options	None

CONNECTIONS
Purpose	Location	Purpose	Location
ATX power connector	ATX	Power fan	C6
Power LED & keylock	C1/pins 1 - 5	Serial port 1	CN1
Speaker	C1/pins 7 - 10	Serial port 2	CN2
Message LED	C1/pins 12 & 13	Parallel port	CN3
Green PC connector	C1/pins 14 & 15	IDE interface 1	CN4
Soft off power supply	C1/pins 16 & 17	IDE interface 2	CN5
Reset switch	C1/pins 19 & 20	Floppy drive interface	CN6
IDE interface LED	C2	VGA interface	CN7
IR connector	C3	USB, PS/2 mouse, IR connector	CN8
Chassis fan power	C4	VGA feature connector	CN9
CPU fan power	C5	32-bit PCI slots	PC1 – PC4

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	CMOS memory normal operation	RTC	Pins 1 & 2 closed
	CMOS memory clear	RTC	Pins 2 & 3 closed
»	VGA IRQ enabled	VGA	Pins 1 & 3 closed
	VGA IRQ disabled	VGA	Pins 3 & 5 closed

SIMM CONFIGURATION
Size	Bank 0	Bank 1
8MB	(2) 1M x 36	None
16MB	(2) 2M x 36	None
16MB	(2) 1M x 36	(2) 1M x 36
24MB	(2) 2M x 36	(2) 1M x 36
32MB	(2) 4M x 36	None
32MB	(2) 2M x 36	(2) 2M x 36
40MB	(2) 4M x 36	(2) 1M x 36
48MB	(2) 4M x 36	(2) 2M x 36
64MB	(2) 8M x 36	None
64MB	(2) 4M x 36	(2) 4M x 36
72MB	(2) 8M x 36	(2) 1M x 36
80MB	(2) 8M x 36	(2) 2M x 36
96MB	(2) 8M x 36	(2) 4M x 36
128MB	(2) 8M x 36	(2) 8M x 36
128MB	(2) 16M x 36	None
136MB	(2) 16M x 36	(2) 1M x 36
144MB	(2) 16M x 36	(2) 2M x 36
160MB	(2) 16M x 36	(2) 4M x 36
192MB	(2) 16M x 36	(2) 8M x 36
256MB	(2) 16M x 36	(2) 16M x 36
Note: Board accepts EDO memory.

CACHE CONFIGURATION
Size	Bank 0
256KB	(2) 32K x 32
512KB	(2) 64K x 32

VIDEO MEMORY CONFIGURATION

Note: The size and location of the video memory is unidentified.

ON BOARD VIDEO CONFIGURATION
Setting		SEL	VGA
»	Enabled	Open	Pins 4 & 6 closed
	Disabled	Closed	Pins 2 & 4 closed

CPU SPEED SELECTION (CX 6X86)
CPU speed	Clock speed	Multiplier	BF0	BF1	BF2	FS0	FS1	FS2	FS3
166MHz	66MHz	2x	2 & 3	1 & 2	1 & 2	2 & 3	1 & 2	2 & 3	1 & 2
200MHz	75MHz	2x	2 & 3	1 & 2	1 & 2	1 & 2	2 & 3	1 & 2	2 & 3
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (IBM 6X86)
CPU speed	Clock speed	Multiplier	BF0	BF1	BF2	FS0	FS1	FS2	FS3
166MHz	66MHz	2x	2 & 3	1 & 2	1 & 2	2 & 3	1 & 2	2 & 3	1 & 2
200MHz	75MHz	2x	2 & 3	1 & 2	1 & 2	1 & 2	2 & 3	1 & 2	2 & 3
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (CX 6X86MX)
CPU speed	Clock speed	Multiplier	BF0	BF1	BF2	FS0	FS1	FS2	FS3
166MHz	60MHz	2.5x	2 & 3	2 & 3	1 & 2	1 & 2	2 & 3	2 & 3	1 & 2
200MHz	66MHz	2.5x	2 & 3	2 & 3	1 & 2	2 & 3	1 & 2	2 & 3	1 & 2
233MHz	66MHz	3x	1 & 2	2 & 3	1 & 2	2 & 3	1 & 2	2 & 3	1 & 2
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (IBM 6X86MX)
CPU speed	Clock speed	Multiplier	BF0	BF1	BF2	FS0	FS1	FS2	FS3
166MHz	60MHz	2.5x	2 & 3	2 & 3	1 & 2	1 & 2	2 & 3	2 & 3	1 & 2
200MHz	66MHz	2.5x	2 & 3	2 & 3	1 & 2	2 & 3	1 & 2	2 & 3	1 & 2
233MHz	66MHz	3x	1 & 2	2 & 3	1 & 2	2 & 3	1 & 2	2 & 3	1 & 2
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (AM K5)
CPU speed	Clock speed	Multiplier	BF0	BF1	BF2	FS0	FS1	FS2	FS3
75MHz	50MHz	1.5x	1 & 2	1 & 2	1 & 2	2 & 3	2 & 3	2 & 3	1 & 2
90MHz	60MHz	1.5x	1 & 2	1 & 2	1 & 2	1 & 2	2 & 3	2 & 3	1 & 2
100MHz	66MHz	1.5x	1 & 2	1 & 2	1 & 2	2 & 3	1 & 2	2 & 3	1 & 2
120MHz	60MHz	1.5x	1 & 2	1 & 2	1 & 2	1 & 2	2 & 3	2 & 3	1 & 2
133MHz	66MHz	1.5x	1 & 2	1 & 2	1 & 2	2 & 3	1 & 2	2 & 3	1 & 2
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (AM K6)
CPU speed	Clock speed	Multiplier	BF0	BF1	BF2	FS0	FS1	FS2	FS3
166MHz	66MHz	2.5x	2 & 3	2 & 3	1 & 2	2 & 3	1 & 2	2 & 3	1 & 2
200MHz	66MHz	3x	1 & 2	2 & 3	1 & 2	2 & 3	1 & 2	2 & 3	1 & 2
233MHz	66MHz	3.5x	1 & 2	1 & 2	1 & 2	2 & 3	1 & 2	2 & 3	1 & 2
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (INTEL)
CPU speed	Clock speed	Multiplier	BF0	BF1	BF2	FS0	FS1	FS2	FS3
75MHz	50MHz	1.5x	1 & 2	1 & 2	1 & 2	2 & 3	2 & 3	2 & 3	1 & 2
90MHz	60MHz	1.5x	1 & 2	1 & 2	1 & 2	1 & 2	2 & 3	2 & 3	1 & 2
100MHz	66MHz	1.5x	1 & 2	1 & 2	1 & 2	2 & 3	1 & 2	2 & 3	1 & 2
120MHz	60MHz	2x	2 & 3	1 & 2	1 & 2	1 & 2	2 & 3	2 & 3	1 & 2
133MHz	66MHz	2x	2 & 3	1 & 2	1 & 2	2 & 3	1 & 2	2 & 3	1 & 2
150MHz	60MHz	2.5x	2 & 3	2 & 3	1 & 2	1 & 2	2 & 3	2 & 3	1 & 2
166MHz	66MHz	2.5x	2 & 3	2 & 3	1 & 2	2 & 3	1 & 2	2 & 3	1 & 2
200MHz	66MHz	3x	1 & 2	2 & 3	1 & 2	2 & 3	1 & 2	2 & 3	1 & 2
233MHz	66MHz	3.5x	1 & 2	1 & 2	1 & 2	2 & 3	1 & 2	2 & 3	1 & 2
Note: Pins designated should be in the closed position.

CPU VOLTAGE SELECTION (SINGLE)
Voltage	VID0	VID1	VID2
3.4v	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 2 & 3 closed
3.5v	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 2 & 3 closed

CPU VOLTAGE SELECTION (DUAL)
Voltage	VID0	VID1	VID2
2.8v	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 2 & 3 closed
2.9v	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 2 & 3 closed
3.2v	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 1 & 2 closed