P2L-M (REV. 1.01 AUDIO) Motherboard Settings and Configuration
ASUS COMPUTER INTERNATIONAL
P2L-M (REV. 1.01 AUDIO)
Device Type | Mainboard |
Processor | Pentium II |
Processor Speed | 233/266/300/333MHz |
Chip Set | Intel |
Video Chip Set | None |
Maximum Onboard Memory | 256MB (EDO & SDRAM supported) |
Maximum Video Memory | None |
Cache | 256/512KB (located on Pentium II CPU) |
BIOS | Unidentified |
Dimensions | 305mm x 244mm |
I/O Options | 32-bit PCI slots (2), floppy drive interface, game/MIDI port, green PC connector, IDE interfaces (2), parallel port, PS/2 mouse port, serial ports (2), IR connector, USB connectors (2), ATX power connector, AGP slot, line in, line out, microphone in, audio in - CD-ROMs (2) |
NPU Options | None |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
AGP slot | AGP | Game/MIDI port | CN1 |
ATX power connector | ATX | Microphone in | CN2 |
Power LED & keylock | C1/pins 1 - 5 | Line in | CN3 |
Speaker | C1/pins 7 - 10 | Line out | CN4 |
Message LED | C1/pins 12 & 13 | Serial port 2 | CN5 |
Green PC connector | C1/pins 14 & 15 | Serial port 1 | CN6 |
Soft off power supply | C1/pins 16 & 17 | Parallel port | CN7 |
Reset switch | C1/pins 19 & 20 | USB connector 1 | CN8 |
IDE interface LED | C2 | USB connector 2 | CN9 |
Chassis fan power | C3 | PS/2 mouse port | CN10 |
Fan power | C4 | Floppy drive interface | CN11 |
CPU fan power | C5 | IDE interface 2 | CN12 |
Wake on LAN connector | C6 | IDE interface 1 | CN13 |
Digital audio interface | C7 | IR connector | IR1 |
Audio in - CD-ROM | C8 | 32-bit PCI slots | PC1 - PC2 |
Audio in - CD-ROM | C9 | Thermal temperature sensor | RT3 |
Stereo audio in | C10 |
|
|
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
» | Factory configured - do not alter | J1 | Unidentified |
» | Keyboard power disabled | KBD | Pins 1 & 2 closed |
| Keyboard power enabled | KBD | Pins 2 & 3 closed |
» | CMOS memory normal operation | RTC | Open |
| CMOS memory clear | RTC | Closed |
» | Factory configured - do not alter | RT2 | Unidentified |
» | Factory configured - do not alter | SMB | Unidentified |
DIMM CONFIGURATION | ||
Size | Bank 0 | Bank 1 |
8MB | (1) 1M x 64 | None |
16MB | (1) 2M x 64 | None |
16MB | (1) 1M x 64 | (1) 1M x 64 |
24MB | (1) 2M x 64 | (1) 1M x 64 |
32MB | (1) 4M x 64 | None |
32MB | (1) 2M x 64 | (1) 2M x 64 |
DIMM CONFIGURATION (CON'T) | ||
Size | Bank 0 | Bank 1 |
40MB | (1) 4M x 64 | (1) 1M x 64 |
48MB | (1) 4M x 64 | (1) 2M x 64 |
64MB | (1) 8M x 64 | None |
64MB | (1) 4M x 64 | (1) 4M x 64 |
72MB | (1) 8M x 64 | (1) 1M x 64 |
80MB | (1) 8M x 64 | (1) 2M x 64 |
96MB | (1) 8M x 64 | (1) 4M x 64 |
128MB | (1) 16M x 64 | None |
128MB | (1) 8M x 64 | (1) 8M x 64 |
136MB | (1) 16M x 64 | (1) 1M x 64 |
144MB | (1) 16M x 64 | (1) 2M x 64 |
160MB | (1) 16M x 64 | (1) 4M x 64 |
192MB | (1) 16M x 64 | (1) 8M x 64 |
256MB | (1) 16M x 64 | (1) 16M x 64 |
Note: Board accepts EDO & SDRAM memory. | ||
CACHE CONFIGURATION |
Note: 256KB/512KB cache is located on the Pentium II CPU. |
CPU SPEED SELECTION | |||||
CPU speed | Clock speed | Multiplier | FS0 | FS1 | FS2 |
233MHz | 66MHz | 3.5x | 1 & 2 | 1 & 2 | 1 & 2 |
266MHz | 66MHz | 4x | 1 & 2 | 1 & 2 | 1 & 2 |
300MHz | 66MHz | 4.5x | 1 & 2 | 1 & 2 | 1 & 2 |
333MHz | 66MHz | 5x | 1 & 2 | 1 & 2 | 1 & 2 |
Note: Pins designated should be in the closed position. | |||||
CPU SPEED SELECTION (CON'T) | ||||||
CPU speed | Clock speed | Multiplier | BF0 | BF1 | BF2 | BF3 |
233MHz | 66MHz | 3.5x | 1 & 2 | 1 & 2 | 2 & 3 | 2 & 3 |
266MHz | 66MHz | 4x | 2 & 3 | 2 & 3 | 1 & 2 | 2 & 3 |
300MHz | 66MHz | 4.5x | 1 & 2 | 2 & 3 | 1 & 2 | 2 & 3 |
333MHz | 66MHz | 5x | 2 & 3 | 1 & 2 | 1 & 2 | 2 & 3 |
Note: Pins designated should be in the closed position. | ||||||
My Books
