AP58 Motherboard Settings and Configuration

Device Type	Mainboard
Processor	CX 6X86/CX 6X86L/CX 686MX/AM K5/AM K6/IDT C6/Pentium/ Pentium MMX
Processor Speed	75/90/100/120/133/150/166/200/233/266/300MHz
Chip Set	SIS
Video Chip Set	None
Maximum Onboard Memory	384MB (EDO & SDRAM supported)
Maximum Video Memory	None
Cache	256/512KB
BIOS	Award
Dimensions	280mm x 220mm
I/O Options	32-bit PCI slots (4), floppy drive interface, green PC connector, IDE interfaces (2), parallel port, PS/2 mouse interface, serial ports (2), IR connector, USB connector
NPU Options	None

CONNECTIONS
Purpose	Location	Purpose	Location
Power LED & keylock	C1/pins 1 – 5	Serial port 2	CN3
Speaker	C1/pins 7 – 10	Parallel port	CN4
Green PC LED	C1/pins 12 & 13	IDE interface 1	CN5
Green PC connector	C1/pins 15 – 17	IDE interface 2	CN6
Reset switch	C1/pins 19 & 20	PS/2 mouse interface	CN7
IDE interface LED	C2	IR connector	IR1
CPU fan power	C3	32-bit PCI slots	PC1 – PC4
Floppy drive interface	CN1	USB connector	USB
Serial port 1	CN2

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	PCI clock select synchronous	JP8	Pins 1 & 2 closed
	PCI clock select asynchronous	JP8	Pins 2 & 3 closed
»	CMOS memory normal operation	JP14	Pins 1 & 2 closed
	CMOS memory clear	JP14	Pins 2 & 3 closed
»	On board I/O enabled	JP18	Pins 1 & 2 closed
	On board I/O disabled	JP18	Pins 2 & 3 closed

SIMM CONFIGURATION
Size	Bank 0	Bank 1
8MB	(2) 1M x 36	None
16MB	(2) 2M x 36	None
16MB	(2) 1M x 36	(2) 1M x 36
24MB	(2) 2M x 36	(2) 1M x 36
32MB	(2) 4M x 36	None
32MB	(2) 2M x 36	(2) 2M x 36
40MB	(2) 4M x 36	(2) 1M x 36
48MB	(2) 4M x 36	(2) 2M x 36
64MB	(2) 8M x 36	None
64MB	(2) 4M x 36	(2) 4M x 36
72MB	(2) 8M x 36	(2) 1M x 36
80MB	(2) 8M x 36	(2) 2M x 36
96MB	(2) 8M x 36	(2) 4M x 36
128MB	(2) 8M x 36	(2) 8M x 36
128MB	(2) 16M x 36	None
136MB	(2) 16M x 36	(2) 1M x 36

SIMM CONFIGURATION (CON’T)
Size	Bank 0	Bank 1
144MB	(2) 16M x 36	(2) 2M x 36
160MB	(2) 16M x 36	(2) 4M x 36
192MB	(2) 16M x 36	(2) 8M x 36
256MB	(2) 16M x 36	(2) 16M x 36
Note: Board accepts EDO memory.

DIMM CONFIGURATION
Size	Bank 2	Bank 3
8MB	(1) 1M x 64	None
16MB	(1) 2M x 64	None
16MB	(1) 1M x 64	(1) 1M x 64
24MB	(1) 2M x 64	(1) 1M x 64
32MB	(1) 4M x 64	None
32MB	(1) 2M x 64	(1) 2M x 64
40MB	(1) 4M x 64	(1) 1M x 64
48MB	(1) 4M x 64	(1) 2M x 64
64MB	(1) 8M x 64	None
64MB	(1) 4M x 64	(1) 4M x 64
72MB	(1) 8M x 64	(1) 1M x 64
80MB	(1) 8M x 64	(1) 2M x 64
96MB	(1) 8M x 64	(1) 4M x 64
128MB	(1) 16M x 64	None
128MB	(1) 8M x 64	(1) 8M x 64
136MB	(1) 16M x 64	(1) 1M x 64
144MB	(1) 16M x 64	(1) 2M x 64
160MB	(1) 16M x 64	(1) 4M x 64
192MB	(1) 16M x 64	(1) 8M x 64
256MB	(1) 16M x 64	(1) 16M x 64
Note: Board accepts SDRAM memory.

CACHE CONFIGURATION
Size	Bank 0
256KB	(2) 32K x 32
512KB	(2) 64K x 32

CPU SPEED SELECTION (CX 6X86)
CPU speed	Clock speed	Multiplier	JP1	JP2	JP3	JP4	JP5	JP6
120MHz	50MHz	2x	2 & 3	1 & 2	1 & 2	2 & 3	2 & 3	1 & 2
133MHz	55MHz	2x	2 & 3	1 & 2	1 & 2	2 & 3	2 & 3	2 & 3
150MHz	60MHz	2x	2 & 3	1 & 2	1 & 2	1 & 2	2 & 3	1 & 2
166MHz	66MHz	2x	2 & 3	1 & 2	1 & 2	2 & 3	1 & 2	1 & 2
200MHz	75MHz	2x	2 & 3	1 & 2	1 & 2	1 & 2	2 & 3	2 & 3
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (CX 6X86L)
CPU speed	Clock speed	Multiplier	JP1	JP2	JP3	JP4	JP5	JP6
150MHz	60MHz	2x	2 & 3	1 & 2	1 & 2	1 & 2	2 & 3	1 & 2
166MHz	66MHz	2x	2 & 3	1 & 2	1 & 2	2 & 3	1 & 2	1 & 2
200MHz	75MHz	2x	2 & 3	1 & 2	1 & 2	1 & 2	2 & 3	2 & 3
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (CX 6X86MX)
CPU speed	Clock speed	Multiplier	JP1	JP2	JP3	JP4	JP5	JP6
166MHz	60MHz	2.5x	2 & 3	2 & 3	1 & 2	1 & 2	2 & 3	1 & 2
200MHz	66MHz	2.5x	2 & 3	2 & 3	1 & 2	2 & 3	1 & 2	1 & 2
200MHz	75MHz	2x	2 & 3	1 & 2	1 & 2	1 & 2	2 & 3	2 & 3
233MHz	66MHz	3x	1 & 2	2 & 3	1 & 2	2 & 3	1 & 2	1 & 2
233MHz	83MHz	2x	2 & 3	1 & 2	1 & 2	2 & 3	1 & 2	2 & 3
266MHz	66MHz	3.5x	1 & 2	1 & 2	1 & 2	2 & 3	1 & 2	1 & 2
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (AM K5)
CPU speed	Clock speed	Multiplier	JP1	JP2	JP3	JP4	JP5	JP6
75MHz	50MHz	1.5x	1 & 2	1 & 2	1 & 2	2 & 3	2 & 3	1 & 2
90MHz	60MHz	1.5x	1 & 2	1 & 2	1 & 2	1 & 2	2 & 3	1 & 2
100MHz	66MHz	1.5x	1 & 2	1 & 2	1 & 2	2 & 3	1 & 2	1 & 2
120MHz	60MHz	1.5x	1 & 2	1 & 2	1 & 2	1 & 2	2 & 3	1 & 2
133MHz	66MHz	1.5x	1 & 2	1 & 2	1 & 2	2 & 3	1 & 2	1 & 2
166MHz	66MHz	1.75x	2 & 3	2 & 3	1 & 2	2 & 3	1 & 2	1 & 2
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (AM K6)
CPU speed	Clock speed	Multiplier	JP1	JP2	JP3	JP4	JP5	JP6
166MHz	66MHz	2.5x	2 & 3	2 & 3	1 & 2	2 & 3	1 & 2	1 & 2
200MHz	66MHz	3x	1 & 2	2 & 3	1 & 2	2 & 3	1 & 2	1 & 2
233MHz	66MHz	3.5x	1 & 2	1 & 2	1 & 2	2 & 3	1 & 2	1 & 2
266MHz	66MHz	4x	2 & 3	1 & 2	2 & 3	2 & 3	1 & 2	1 & 2
300MHz	66MHz	4.5x	2 & 3	2 & 3	2 & 3	2 & 3	1 & 2	1 & 2
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (IDT C6)
CPU speed	Clock speed	Multiplier	JP1	JP2	JP3	JP4	JP5	JP6
150MHz	75MHz	2x	2 & 3	1 & 2	1 & 2	1 & 2	2 & 3	2 & 3
180MHz	60MHz	3x	1 & 2	2 & 3	1 & 2	1 & 2	2 & 3	1 & 2
200MHz	66MHz	3x	1 & 2	2 & 3	1 & 2	2 & 3	1 & 2	1 & 2
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (INTEL)
CPU speed	Clock speed	Multiplier	JP1	JP2	JP3	JP4	JP5	JP6
75MHz	50MHz	1.5x	1 & 2	1 & 2	1 & 2	2 & 3	2 & 3	1 & 2
90MHz	60MHz	1.5x	1 & 2	1 & 2	1 & 2	1 & 2	2 & 3	1 & 2
100MHz	66MHz	1.5x	1 & 2	1 & 2	1 & 2	2 & 3	1 & 2	1 & 2
120MHz	60MHz	2x	2 & 3	1 & 2	1 & 2	1 & 2	2 & 3	1 & 2
133MHz	66MHz	2x	2 & 3	1 & 2	1 & 2	2 & 3	1 & 2	1 & 2
150MHz	60MHz	2.5x	2 & 3	2 & 3	1 & 2	1 & 2	2 & 3	1 & 2
166MHz	66MHz	2.5x	2 & 3	2 & 3	1 & 2	2 & 3	1 & 2	1 & 2
200MHz	66MHz	3x	1 & 2	2 & 3	1 & 2	2 & 3	1 & 2	1 & 2
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (INTEL MMX)
CPU speed	Clock speed	Multiplier	JP1	JP2	JP3	JP4	JP5	JP6
150MHz	60MHz	2.5x	2 & 3	2 & 3	1 & 2	1 & 2	2 & 3	1 & 2
166MHz	66MHz	2.5x	2 & 3	2 & 3	1 & 2	2 & 3	1 & 2	1 & 2
200MHz	66MHz	3x	1 & 2	2 & 3	1 & 2	2 & 3	1 & 2	1 & 2
233MHz	66MHz	3.5x	1 & 2	1 & 2	1 & 2	2 & 3	1 & 2	1 & 2
Note: Pins designated should be in the closed position.

CPU VOLTAGE SELECTION
Voltage	JP11
2.2v	Pins 11 & 12 closed
2.8v	Pins 7 & 8 closed
2.9v	Pins 5 & 6 closed
3.2v	Pins 9 & 10 closed
3.45v	Pins 1 & 2 closed
3.45v/3.52v (IDT only)	Pins 1 & 2, 3 & 4 closed
3.52v	Pins 3 & 4 closed